• 제목/요약/키워드: Electronic energy meter

검색결과 28건 처리시간 0.025초

임베디드 전력 모니터링 보안 모듈 설계 (Embedded-based Power Monitoring Security Module Design)

  • 윤찬호;김광준;장창수
    • 한국전자통신학회논문지
    • /
    • 제8권10호
    • /
    • pp.1485-1490
    • /
    • 2013
  • 스마트 그리드용 전력망이 구축시범사업이 진행됨에 따라 스마트 디지털가전 AV기술, 냉난방 습도 공기 자동관리를 위한 복합에너지 관리기능을 담당하는 스마트 홈 에너지관리기술, 노약자와 장애인을 위한 주거설계와 가족 구성원에 대한 개인별 바이오정보 측정을 담당하게 될 헬스케어 기술, 생체인식 보안과 동작감지센서 등을 다루는 스마트 홈 시큐리티 기술 등 연구가 진행되고 있다. 본 논문에서는 물리적 공격에 취약한 외부에 노출되는 문제점이 발생하게 되는 스마트미터기에 대응되는 암호기술을 분석하고 단말기의 효율성을 극대화 할수 있는 스마트 미터기 단말기용 보안시스템 설계를 제안하였다.

디스플레이 커버 글라스의 표면 처리에 의한 광학요소 제어 (Optical Properties Control by Surface Treatment on Display Cover Glass)

  • 김성수;황재석;전법주
    • 한국전기전자재료학회논문지
    • /
    • 제28권9호
    • /
    • pp.607-614
    • /
    • 2015
  • To provide the clear images from the direct light on electrical board and display devices, anti glare treatment of display cover glass is needed. In this study, the effects of surface treatment temperature, concentration, and etching solution coating thickness of the gel phase on optical elements control such as gloss, haze of reflected light and transmittance, were investigated. Cover glasses were treated at different coating thickness and additive concentration. The optical properties were examined using spectrophotometer, gloss and haze meter. The surface morphology and roughness were measured by the optical microscope and Ra measuring instrument. The etching rate and surface morphologies were dramatically affected by the concentration of acid additive in the viscous gel because of re-crystallization of components in the etching solution, hydrogel formation and coagulant after coating on glass substrate. In our experimental range, cover glass which is surface-treated with various optical properties as well as the morphology uniformity was obtained; in particular, optical properties could be controlled by etching solution coating thickness of the gel phase and the concentration of additive. The gloss was depended on the surface roughness and it showed the linear relationship between optical transmittance and haze of reflected light, respectively.

LTE와 IoT 기술을 이용한 스마트미터 데이터 전송장치와 전력 IT 시스템 (Smart meter data transmission device and power IT system using LTE and IoT technologies)

  • 강기범;김홍수;좌정우;김호찬;강민제
    • 한국산학기술학회논문지
    • /
    • 제18권10호
    • /
    • pp.117-124
    • /
    • 2017
  • 스마트 그리드는 기존 전력망에 ICT기술을 접목하여 소비자와 전력 공급자 간 양방향으로 실시간 정보를 교환함으로써 에너지를 효율적으로 사용 할 수 있는 시스템이다. 수요반응(DR, Demand response)은 전기사용자가 전력시장 가격이 높거나 전력계통 위기일 때 절약한 전기를 전력시장에 판매하여 금전으로 보상받는 제도이다. 본 논문은 스마트 미터(Smart Meter)를 사용하여 실시간으로 수요 정보를 계측하고 이를 클라우드 서버로 전송하는 전력량 계측 데이터 전송장치와 전력 IT 시스템을 개발하였다. 본 논문에서 개발된 전력량 계측 데이터 전송장치는 한국전력 데이터와 측정 오차가 없는 신뢰성이 있는 데이터를 제공하기 위해 Raspberry Pi 3에 연결된 빛 센서를 이용하여 한국전력 계측기의 전력량 단위마다 깜박이는 램프의 횟수를 계측한다. 전력량 계측 데이터 전송 장치는 표준 통신 프로토콜인 OpenADR 2.0b를 사용한다. 계측된 데이터는 LTE, WiFi 통신망을 통해 VEN, VTN, 계산 프로그램으로 구성되는 전력 IT 시스템의 MySQL DB에 저장된다. 개발된 전력량 계측 데이터 전송 장치는 전력계통 위기가 발생할 때 급전지시를 내려 피크감축 DR을 실행한다. 개발한 전력량 계측 데이터 전송 장치는 기존 스마트 미터링의 계측시간이 15분으로 고정되는 것과 달리 사용자가 1분 단위로 조절할 수 있는 장점을 갖는다.

Debye 이론을 이용한 유기 EL용 Alq3계 재료의 Trap Level 측정 (Trap Level Study of Alq3 for OLED with Debye Dielectric Relaxation)

  • 정용석;정연태;김종태
    • 한국전기전자재료학회논문지
    • /
    • 제17권6호
    • /
    • pp.668-672
    • /
    • 2004
  • Upon Debye's dielectric relaxation theory, we tried simple determination method of trap level in organic EL materials. From dielectric measurements in the 20 Hz - 1 MHz frequency range and in the 150 K - 320K temperature range, the depth of traps in Alq$_3$ filled with remaining electrons was determinated. Comparing to other determination techniques like TSL, or TL, the apparatus all we need is just simple LCR meter, thermometer and cooling method(liquid nitrogen). The mean activation energy is about 0.20 eV. It is in good agreement with previous determinations by other techniques like TSL. This results consolidate the validity of Burrow's transport mechanism model. Further intensified experiment with UV light on the dielectric absorption(Photodipolair effect) was nevertheless disturbed by the photoconductivity component.

Energy-saving Strategy Based on an Immunization Algorithm for Network Traffic

  • Zhao, Dongyan;Long, Keping;Wang, Dongxue;Zheng, Yichuan;Tu, Jiajing
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권4호
    • /
    • pp.1392-1403
    • /
    • 2015
  • The rapid development of both communication traffic and increasing optical network sizes has increased energy consumption. Traditional algorithms and strategies don't apply to controlling the expanded network. Immunization algorithms originated from the complex system theory are feasible for large-scale systems based on a scale-free network model. This paper proposes the immunization strategy for complex systems which includes random and targeted immunizations to solve energy consumption issues and uses traffic to judge the energy savings from the node immunization. The simulation results verify the effectiveness of the proposed strategy. Furthermore, this paper provides a possibility for saving energy with optical transmission networks.

가스온수가열기의 용량에 따른 에너지효율성 비교 연구 (A Comparative Study on the Energy Efficiency due to the Capacity of Gas Boiler)

  • 김성중;우인성
    • 대한안전경영과학회지
    • /
    • 제17권2호
    • /
    • pp.229-234
    • /
    • 2015
  • Depending on the living styles, the types of energy consumed by households have changed, and the consumption has increased rapidly. Consequently, those have led to environmental issues, such as exhaustion of energy and the climate changes. As one of solutions to such issues, energy efficiency can be approached. Therefore, in this study, the gas water heater(115S type Rheem products) that made in Germany and obtain hot water using gas as a heat source is selected. a $1.0m^3$ water tank with a 6kW electronic heater is installed and a water temperature and pressure is maintain constantly also thermometer is injected. Two of gas meter, one of pressure regulator and three of time measurement devices are installed in a combustion facility and fuelling facility with a magnet valve so it can observe and record combustion reactions. Quantity of hot water that heated by boiler is recorded using a quantity measurement tank, and have been heated by the boiler have been to record and measure the amount and utilized the data acquired through measurement of all factors that are applied to acquire hot water in order to calculate the use rate of final energy. In conclusion, this researcher drew the economic strong points of the hot water generated by gas.

양자점과 응용기술 (Quantum dot and their applications)

  • 손동익
    • 진공이야기
    • /
    • 제4권4호
    • /
    • pp.4-13
    • /
    • 2017
  • Quantum structures containing nanoparticles have attracted much attention because of their promising potential applications in electronic and optoelectronic devices operating at lower currents and higher temperatures. The quantum dot is a particle of matter so small that the addition or removal of an electron changes its properties in some useful way. The Quantum dots typically have dimensions measured in nanometers, where one nanometer is 10-9 meter or a millionth of a millimeter. The emission and absorption spectra corresponding to the energy band gap of the quantum dot is governed by quantum confinement principles in an infinite square well potential. The energy band gap increases with a decrease in size of the quantum dot. In this review paper, we will discuss the quantum dot and their application.

불규칙 패턴 에칭에 의한 표면 형상 제어와 광학적 특성 (Optical Property and Surface Morphology Control by Randomly Patterned Etching)

  • 김성수;이정우;전법주
    • 한국전기전자재료학회논문지
    • /
    • 제30권12호
    • /
    • pp.800-805
    • /
    • 2017
  • Randomly patterned and wet chemical etching processes were used to treat anti-glare of display cover glasses. The surface and optical properties of grain size and surface morphology controlled by randomly patterned etching and wet chemical solution etching were investigated. The surface morphology and roughness of the etched samples were examined using a spectrophotometer and a portable surface roughness (Ra) measuring instrument, respectively. The gloss caused by reflection from the glass surface was measured at $60^{\circ}$ using a gloss meter. The surface of the sample etched by the doctor-blade process was more uniform than that obtained from a screen pattern etching process at gel state etching process of the first step. The surface roughness obtained from the randomly patterned etching process depended greatly on the mesh size, which in turn affected the grain size and pattern formation. The surface morphology and gloss obtained by the etching process in the second step depended primarily on the mesh size of the gel state etching process of the first step. In our experimental range, the gloss increased on decreasing the grain size at a lower mesh size for the first step process and for longer reaction times for the second step process.

지중케이블 활선검출기를 위한 자장 센서 개발 (Development of Magnetic Sensor for Live Line Detector of the Underground Cable)

  • 김기준;오용철;이경섭;정한석;김탁용;최미희;송민영;신철기;김진사
    • 한국전기전자재료학회논문지
    • /
    • 제24권2호
    • /
    • pp.166-171
    • /
    • 2011
  • We use the electrical energy and it is essential energy in modern life, but we lay cable underground due to the issue for environment and safety. Safety for worker is still insufficient for the development of safety equipment and related research has been focused on the cable lifetime diagnosis at underground cable work. I have to develop live line detector around the magnetic field were investigated at underground cable. In this paper, we were investigated by variation of coil turns and load due to detection of magnetic field at lines around. And detected value of developing products compared with measured value of milli-gauss meter. As a result, the value of the number of coil turns was found to be proportional to the measured value. But turn-numbers increase showed that the weak noise. I could be confirmed that sensor showed the optimum value from 4,000 to 5,0000.

AMI 시스템 구축용 스마트 미터의 통신 상태 진단방법 (A Diagnosis Method of Communication Networks for AMI Smart Meters)

  • 정준홍;최길용
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2015년도 제46회 하계학술대회
    • /
    • pp.55-56
    • /
    • 2015
  • A smart meter is a kind of electronic meters that measures and records consumption of electric energy in intervals of an hour or less and transmits that information to the remote places. AMI provides two-way communication path between utilities and consumers and should be able to support smart grid's new functionalities such as demand-response actions and real time pricing. The main objective of this paper is to provide a new diagnosis method and system for testing of smart meters in AMI neighborhood area network.

  • PDF