• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2006년도 하계종합학술발표회 논문 초록집
• /
• pp.715-715
• /
• 2006

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1838-1840
• /
• 2001

A dual probe laser Doppler vibrometer (LDV) that has one laser source and provides two independent object beams has been developed for the first time. An electronic circuit that converts light signal to electronic signal has been also developed using digital phase locked loop(DPLL). It was found that this types of dual probe LDV can be used in differential mode and self-vibration compensation mode.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권3호
• /
• pp.999-1021
• /
• 2023

Differential spatial modulation uses the antenna index to transmit information, which improves the spectral efficiency, and completely bypasses any channel side information in the recommended setting. A generalized distributed multiple turbo coded-cooperative differential spatial modulation based on distributed multiple turbo code is put forward and its performances in Rayleigh fading channels is analyzed. The generalized distributed multiple turbo coded-cooperative differential spatial modulation scheme is a coded-cooperation communication scheme, in which we proposed a new joint parallel iterative decoding method. Moreover, the code matched interleaver is considered to be the best choice for the generalized multiple turbo coded-cooperative differential spatial modulation schemes, which is the key factor of turbo code. Monte Carlo simulated results show that the proposed cooperative differential spatial modulation scheme is better than the corresponding non-cooperative scheme over Rayleigh fading channels in multiple input and output communication system under the same conditions. In addition, the simulation results show that the code matched interleaver scheme gets a better diversity gain as compared to the random interleaver.

• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.964-969
• /
• 2007

본 논문에서는 모바일 RFID 시스템 환경을 제시하였고, 그 환경에 적합한 저 잡음 차동 콜피츠 전압 제어 발진기를 구현하였다. 밀집 리더 환경에 맞춘 전압 제어 발진기는 $0.35{\mu}m$ 공정을 사용하였고, 주파수 범위는 RFID 주파수 범위인 $860{\sim}960 MHz$를 포함시킬 수 있도록 $1.55{sim}2.053 GHz$로 설계하였다. 2분주기 출력에서 측정한 위상 잡음은 오프셋 주파수가 40 kHz일 때 -106 dBc/Hz로 측정되었고, 1MHz일 때에는 -135 dBc/Hz로 측정되었다. 5 비트의 디지털 튜닝을 이용하여 낮은 발진기 이득(<45 MHz/V)을 갖게 하여 주파수 합성기에서의 위상 잡음 특성을 좋게 하였다. 설계한 차동 콜피츠 발진기의 FOM은 1.93 dB로 타 2 GHz 대역의 발진기들 보다 높게 측정되었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.506-510
• /
• 2016

A triple-band (TB) oscillator was implemented in the TSMC $0.18{\mu}m$ 1P6M CMOS process, and it uses a cross-coupled nMOS pair and two shunt $4^{th}$ order LC resonators to form a $6^{th}$ order resonator with three resonant frequencies. The oscillator uses the varactors for band switching and frequency tuning. The core current and power consumption of the high (middle, low)- band core oscillator are 3.59(3.42, 3.4) mA and 2.4(2.29, 2.28) mW, respectively at the dc drain-source bias of 0.67V. The oscillator can generate differential signals in the frequency range of 8.04-8.68 GHz, 5.82-6.15 GHz, and 3.68-4.08 GHz. The die area of the triple-band oscillator is $0.835{\times}1.103mm^2$.

• 전력전자학회논문지
• /
• 제27권1호
• /
• pp.1-8
• /
• 2022

Recently, photovoltaic (PV) systems have been gradually applied in eco-friendly vehicle applications to improve fuel economy. The relevant market is expected to continue to grow because the installation of large-capacity PV systems to other eco-friendly vehicles, such as electric buses and trains, is being considered. However, in a PV system, power imbalance between submodules and low power generation efficiency occur due to factors such as cell aging, contamination, and shading. To resolve this problem, various differential power processing (DPP) converters have been researched and developed. However, conventional DPP converters suffer from large volume and low efficiency. Therefore, to apply DPP converters to eco-friendly vehicles, increasing efficiency and reducing volume and price compared with existing DPP converters is necessary. In this paper, a novel DPP converter with an integrated transformer is proposed and analyzed. The proposed DPP converter uses a single magnetic component by integrating transformers and secondary sides of conventional DPP converters. Therefore, the proposed DPP converter shows high power density and high efficiency, and it is suitable for PV systems in eco-friendly vehicle applications.

• 한국전자파학회논문지
• /
• 제23권10호
• /
• pp.1196-1203
• /
• 2012

본 논문에서는 미소 뮬러 행렬 보정법(differential Mueller matrix calibration technique: DMMCT)을 이용하여 C-밴드의 지상운용용 HPS(Hongik Polarimetric Scatterometer) 시스템을 보정한 연구 결과를 선보인다. 스캐터미터 시스템 보정을 위해 금속구를 이용하여 안테나 주빔에서의 편파 측정한 안테나 패턴을 챔버에서 측정하고, DMMCT를 이용하여 지상운용용 HPS의 왜곡 정도를 분석하여 정확하게 보정한다. 단일 편파 시스템과는 다르게 완전 편파 시스템에서는 후방 산란 계수뿐만 아니라 위상 변수들도 중요하다. 보정된 지상운용용 HPS를 이용하면 논, 맨땅, 작물밭 등의 지표면에 대한 정확한 Mueller 행렬을 얻을 수 있으므로, 후방 산란 계수뿐만 아니라 동일 편파와 교차 편파의 위상 변수들도 정확하게 측정하게 된다. 보정의 정확도는 산란 모델을 이용해 계산한 후방 산란 계수와 측정한 후방 산란 계수의 비교로 확인할 수 있다. 따라서 측정으로 쟁기질 한 밭의 편파 응답 특성을 얻었으며, 이 결과를 이론 모델로 얻은 편파 응답 특성과 비교하여 보정 기술을 검증하였다.

• 한국전자파학회논문지
• /
• 제24권4호
• /
• pp.459-465
• /
• 2013

본 논문에서는 차분 간섭 기법(differential interferometry)을 이용하여 지표면의 높이 변화를 탐지하고, 이를 이용하여 지표면 수분함유량의 변화를 알아낸다. 본 연구에서는 COSMO-SkyMed SAR 영상을 이용하여 DInSAR(DiFferential Interferometric SAR) 기법을 확인한다. 침투 깊이는 지표면 수분함유량에 따라 달라지며, 그에 따라 수신하는 신호의 위상이 변하게 된다. 지표면의 높이와 그 변위는 두 수신 신호의 위상차를 이용하는 레이더 간섭 기법(radar inteferometry)을 통하여 탐지할 수 있다. 변위 변화를 분석하기 위해 동일 지역의 영상 3장 중 한 장을 기준 영상(reference image)으로 사용한다. 동일 지역의 기준 영상과 나머지 두 영상은 각각 차분 간섭 기법으로 처리한다. 이 차분 간섭 기법을 검증하기 위해 실제 영상 획득 지역의 수분함유량을 측정하였다. 측정한 수분함유량을 이용하여 지표면의 침투 깊이를 계산하고, 차분 간섭 기법을 통하여 얻은 지표면 변위 정보와 비교 분석한다.

• 전기학회논문지
• /
• 제61권12호
• /
• pp.1801-1806
• /
• 2012

This paper presents a simple and practical method which enables to prevent malfunction of protection relay due to differential current caused by one end CT saturation in case of external fault. This method uses difference of magnitude(instantaneous value) between the both end current just before the occurrence of differential current without a separate method to CT staturation detection. One end CT saturation is simulated by current transformer model using type-96 component and the presented method is verified by using EMTP MODELS with respect to internal and external fault with one end CT staturation. The presented method distinguished rightly bewteen external and internal fault with one end CT saturation. This information can be used to prevent malfunction of current differential protection relay in case of external fault. And this method is not affected by sampling rate and has no calculation burden, so it will be applicable to differential current protection relay with ease.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권8호
• /
• pp.3852-3864
• /
• 2016

Patients' health data is very sensitive and the access to individual's health data should be strictly restricted. However, many data consumers may need to use the aggregated health data. For example, the insurance companies needs to use this data to setup the premium level for health insurances. Therefore, privacy-preserving data aggregation solutions for health data have both theoretical importance and application potentials. In this paper, we propose a privacy-preserving health data aggregation scheme using differential privacy. In our scheme, patients' health data are aggregated by the local healthcare center before it is used by data comsumers, and this prevents individual's data from being leaked. Moreover, compared with the existing schemes in the literature, our work enjoys two additional benefits: 1) it not only resists many well known attacks in the open wireless networks, but also achieves the resilience against the human-factor-aware differential aggregation attack; 2) no trusted third party is employed in our proposed scheme, hence it achieves the robustness property and it does not suffer the single point failure problem.