• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.194-194
• /
• 2008

Lead oxide based ceramics, represented by PZT, are the most widely used materials for piezoelectric actuators, sensors, and transducers due to their excellent piezoelectric properties. In particular, high-performance multilayered piezoelectric ceramics for advanced electronic components have drawn great attention. In order to develop piezoelectric ceramics capable of being sintered at low temperature for multilayer piezoelectric device applications, the effect of CuO additions on the microstructures and electromechanical properties of the 0.4Pb$(Mg_{1/3}Nb_{2/3})O_3-0.25PbZrO_3-0.35PbTiO_3$ ceramics was investigated. The samples with CuO addition were synthesized by ordinary sintering technique. X-ray diffractions indicated that all samples formed a single phase perovskite structure. The addition of CuO improved the sinterability of the samples and caused an increase in the density and grain size at low temperature. The optimum sintering temperature was lowered by CuO additions. Excellent piezoelectric and electromechanical responses, $d_{33}$ ~ 663 pC/N, $k_p$ ~ 0.72, were obtained for the samples of high density with 0.1 wt% CuO addition sintered at $1050^{\circ}C$ for 4 h in air. These results show that the piezoelectric properties of PMNZT ceramics can be improved by controlling the microstructure and this system is potentially a good candidate as multilayer piezoelectric device for a wide range of electro-mechanical transducer applications.

• Journal of Sensor Science and Technology
• /
• v.6 no.6
• /
• pp.476-482
• /
• 1997

A portable electronic nose system has been fabricated and characterized using an oxide semiconductor gas sensor array and pattern recognition techniques such as principal component analysis and back-propagation artificial neural network. The sensor array consists of six thick-film gas sensors whose sensing layers are Pd-doped $WO_{3}$, Pt-doped $SnO_{2}$, $TiO_{2}-Sb_{2}O_{5}-Pd$-doped $SnO_{2}$, $TiO_{2}-Sb_{2}O_{5}-Pd$-doped $SnO_{2}$ + Pd coated layer, $Al_{2}O_{3}$-doped ZnO and $PdCl_{2}$-doped $SnO_{2}$. The portable electronic nose system consists of an 16bit Intel 80c196kc as CPU, an EPROM for storing system main program, an EEPROM for containing optimized connection weights of artificial neural network, an LCD for displaying gas concentrations. As an application the system has been used to identify 26 carbon monoxide/hydrocarbon (CO/HC) car exhausting gases in the concentration range of CO 0%/HC 0 ppm to CO 7.6%/HC 400 ppm and the identification has been successfully demonstrated.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.5
• /
• pp.291-294
• /
• 2015

Recently, ZnO based oxide TFTs used in the flexible and transparent display devices are widely studied. To apply to OLED display switching devices, electrical performance and stability are important issues. In this study, to improve these electrical properties, we fabricated TFTs having Al doped Zinc Oxide (AZO) layer inserted between the gate insulator and ZnO layer. The AZO and ZnO layers are deposited by Atomic layer deposition (ALD) method. I-V transfer characteristics and stability of the suggested devices are investigated under the positive gate bias condition while the channel defects are also analyzed by the photoluminescence spectrum. The TFTs with AZO layer show lower threshold voltage ($V_{th}$) and superior sub-threshold slop. In the case of $V_{th}$ shift after positive gate bias stress, the stability is also better than that of ZnO channel TFTs. This improvement is thought to be caused by the reduced defect density in AZO/ZnO stack devices, which can be confirmed by the photoluminescence spectrum analysis results where the defect related deep level emission of AZO is lower than that of ZnO layer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1349-1355
• /
• 2016

It should guarantee high reliability and ultra low latency communication. Additionally, it should support connection between massive devices. As one of estimated scenarios for 5G mobile communication, mobile devices and sensors using low data rate wireless communication will increase. For communication of these devices, single-carrier system can be considered. In order to satisfy these requirements, in this paper, we propose CDMA (Code Division Multiple Access) system using complex spreading and Multi-level BPSK(Binary Phase Shift Keying). The proposed system spread transmit symbol by using chip code consisted of real and imaginary number. As simulation results, we can confirm that although the proposed system has 3dB lower BER (Bit Error Rate) performance than conventional CDMA system, the proposed system can support 2 times more users in comparison with conventional CDMA system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.100-104
• /
• 2012

Fin-type SONOS (silicon-oxide-nitride-oxide-silicon) flash memory has emerged as novel devices having superior controls over short channel effects(SCE) than the conventional SONOS flash memory devices. However despite these advantages, these also exhibit undesirable characteristics such as corner effect. Usually, the corner effect deteriorates the performance by increasing the leakage current. In this paper, the corner effect of fin-type SONOS flash memory devices is investigate by 3D Process and device simulation and their electrical characteristics are compared to conventional SONOS devices. The corner effect has been observed in fin-type SONOS device. The reason why the memory characteristic in fin-type SONOS flash memory device is not improved, might be due to existing undesirable effect such as corner effect as well as the mutual interference of electric field in the fin-type structure as reported previously.

• Transactions on Electrical and Electronic Materials
• /
• v.5 no.3
• /
• pp.89-92
• /
• 2004

For improving solar efficiencies, down conversion of high-energy photons to visible lights is discussed. The losses due to thermalization of charge carriers generated by the absorption of high-energy photons, can largely be reduced in a solar cell if more than one electron-hole pair can be generated per incident photon. The solar cell was constructed of dye-sensitized anatase-based TiO$_2$, approximately 30nm particle size, 6$\mu\textrm{m}$thickness, and 6${\times}$6$\textrm{mm}^2$ active area, Pt counter electrode and I$_3$$\^$-/I$_2$$\^$-/ electrolyte. After correction for losses due to light reflection and absorption by the conducting glass, the conversion of photons to electric current is practically quantitative in the plateau region of the curves. The incident photon to current conversion efficiency(IPCE) of N3 used as a dye in this work is about 80% at around 590nm and 610nm which is the emission spectrum of Eu doped LGF. The Eu doped LGF powder was prepared by conventional ceramic process, and used as a down converter for DSC after spin coated on the slide glass and fired.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.671-678
• /
• 2017

Recent advances in Internet of Things (IoT) encourage us to use IoT devices in daily living areas. However, as IoT devices are being ubiquitously used, concerns onsecurity and privacy of IoT devices are getting grown. Key management is an important and fundamental task to provide security services. For better security, we should restrict reusing a same key in sequential authentication sessions, but it is difficult to manually update and memorize keys. In this paper, we propose a hardware security module(HSM) for automated key management in IoT devices. Our HSM is attached to an IoT device and communicates with the device. It provides an automated, secure key update process without any user intervention. The secure keys provided by our HSM can be used in the user and device authentications for any internet services.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.1
• /
• pp.27-31
• /
• 2011

ZnS:Mn yellow phosphors doped with Sm for white light emitting diodes were synthesized by solid state reaction method. These sample showed the characteristic X-ray diffraction patterns for main peak (110) of ZnS:Mn,Sm. Photoluminescence excitation spectra originated from $Mn^{2+}$ were ranged from 450 nm to 500 nm. The yellow emission at around 580 nm was associated with $^4T_1{\rightarrow}^6A_1$ transition of $Mn^{2+}$ ions in ZnS:Mn,Sm phosphors. The highest photolum inescence intensity of the phosphors under 405 nm and 450 nm excitation was obtained at Sm concentration of 1 mol%. The enhanced photoluminescent intensity in the ZnS:Mn,Sm phosphors was interpreted by energy transfer from Sm to Mn. The highest luminescent intensity of white LED was obtained at the epoxy-to-yellow phosphor ratio of 1:3. At this ratio, the CIE chromaticity of the white LED was X=0.3886 and Y=0.2928.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.5
• /
• pp.168-177
• /
• 2009

This paper proposes the EAP-AKA scheme without UICC for extending its usage to existing WLAN/WiBro devices. To apply the current EAP-AKA scheme, the WLAN/WiBro devices require an external Universal Integrated Circuit Card (UICC) reader. If they don't use UICC due to cost overhead and architectural problem of device, the EAP-AKA scheme loses its own advantages in security and portability aspects. The proposed scheme uses the DH key algorithm and a password for non-UICC devices instead of using the long-term key stored in UICC. The main contribution is to maintain the security and portability of the EAP-AKA while being applied to non-3GPP network devices not equipped with UICC. Furthermore, it does not require major modifications of authentication architecture in 3GPP.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.13 no.4
• /
• pp.291-302
• /
• 2013

NAND flash memory (NFM) based storage devices, e.g. Solid State Drive (SSD), are rapidly replacing conventional storage devices, e.g. Hard Disk Drive (HDD). As NAND flash memory technology advances, its specification has evolved to support denser cells and larger pages and blocks. However, efforts to fully understand their impacts on design objectives such as performance, power, and cost for various applications are often neglected. Our research shows this recent trend can adversely affect the design objectives depending on the characteristics of applications. Past works mostly focused on improving the specific design objectives of NFM based systems via various architectural solutions when the specification of NFM is given. Several other works attempted to model and characterize NFM but did not access the system-level impacts of individual parameters. To the best of our knowledge, this paper is the first work that considers the specification of NFM as the design parameters of NAND flash storage devices (NFSDs) and analyzes the characteristics of various synthesized and real traces and their interaction with design parameters. Our research shows that optimizing design parameters depends heavily on the characteristics of applications. The main contribution of this research is to understand the effects of low-level specifications of NFM, e.g. cell type, page size, and block size, on system-level metrics such as performance, cost, and power consumption in various applications with different characteristics, e.g. request length, update ratios, read-and-modify ratios. Experimental results show that the optimized page and block size can achieve up to 15 times better performance than the conventional NFM configuration in various applications. The results can be used to optimize the system-level objectives of a system with specific applications, e.g. embedded systems with NFM chips, or predict the future direction of NFM.