• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.5
• /
• pp.95-103
• /
• 2013

Protection of the electrical and electronic equipment against surges in low voltage AC power distribution systems is based on wide applications of surge protective devices(SPDs). Cascade application of SPDs located at the service entrance of a building and near sensitive equipment is intended to ensure the optimal voltage protection level and energy sharing among cascade SPDs. In this paper, when surges impinge at the service entrance of the building of interest, the protection characteristics of two-stage cascade SPD systems were investigated. The influence of the distance between the upstream and downstream SPDs on the voltage protection level and energy sharing of the two-stage cascade SPD systems were analyzed experimentally. It was found that the energy sharing of two-stage cascade SPD systems strongly depends on the distance between the two SPDs and the component of SPD. As the distance between the two SPDs increases, the energy absorbed by the upstream SPD increases while the energy absorbed by the downstream SPD decreases. Consequently, it is desirable to select the upstream and downstream SPDs having the proper energy capability with due consideration of the distance between the two SPDs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2670-2674
• /
• 2010

FlexRay is a new standard of network communication system which provides a high speed serial communication, time triggered bus and fault tolerant communication between electronic devices for future automotive applications. The speed of FlexRay is 10 times higher than that of CAN. In this paper, FlexRay module is implemented using MC9S12XF512 micro-controller and gateway converting CAN message to FlexRay message. It is shown that the implemented system operates successfully.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.10a
• /
• pp.245-246
• /
• 2014

This paper suggests the navigation information display system which is based on augmented reality technology and especially focuses on image analysis technology. Navigator has to always confirm the information from marine electronic navigation devices and then they compare with the view of outside targets of the windows. During this 'head down' posture, they feel uncomfortable and sometimes it cause near-accidents such as collision or missing objects, because he or she cannot keep an eye on the front view of windows. Augmented reality can display both of information of virtual and real in a single display. Therefore we tried to adapt the AR technology to help navigators and have been studied and developed image pre-processing module as a previous research already. To analysis the outside view of the bridge window, we have extracted navigational information from the camera image by using image processing. This paper mainly describes about recognizing ship feature by haar-like feature and filtering region of interest area by AIS data, which are to improve accuracy of the image analysis.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.338-343
• /
• 2010

Low cost motor drives are being sought for high volume energy efficient home appliances. Key to the realization of such low cost motor drives is to reduce the power electronic converter in terms of its components, particularly the active devices, finding the motor with least complexity for manufacturing and a controller that could extract the desired performance from the machine and converter combination. These and other factors such as self-starting, speed control over a wide range and most of all the crowning aspect of a four quadrant operation with bare minimum number of controllable switch (or switches) remain as formidable challenges for low cost motor drive realization. In this paper, a four quadrant switched reluctance motor (SRM) drive with only one controllable switch is realized by using a two-phase machine. The theory and operation of the proposed four-quadrant SRM drive with the proposed control algorithm for its realization are described. The motor drive is modeled, simulated and analyzed to verify its feasibility for self-starting, speed control and for four quadrant operation and the simulation results are presented. Experimental results confirm the validity of the proposed control algorithm for four quadrant control of the SRM drive. The focus of the paper is mainly directed toward the control algorithm for realizing the four-quadrant operation of the two-phase SRM drive with a single controllable switch converter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.232-238
• /
• 2009

Flicker, also known as voltage fluctuation, is a newest problem of power quality issues, because it is caused by nonlinear loads such as electrical arc furnace and large-scale induction motor, which are country-widely used as the heavy industries of a country develop. An international standard, International Electrotechnical Commission (IEC) 61000-4-15, was published in 1997 and revised in 2003. With increasing concerns about flicker, its mitigation methods have been also studied. General countermeasures for flicker are divided into three categories: a) enhancing the capacity of supplying system, b) Series elements including series reactor and series capacitor and c) power electronic devices including static VAR compensator (SVC) and static synchronous compensator (STATCOM). This paper introduces how to mitigate the voltage flicker at the point of common coupling (PCC) and presents how to simulate and compare the flicker alleviating effects by each mitigation method, using IEC flickermeter based on the Matlab/Simulink program.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.6
• /
• pp.478-482
• /
• 2015

With the analysis result about previous curative effect researchs, It has been reported that game play therapy is effective for enhancing social intelligence of handicappted children who have ADHD, tic disorder, communication disorder, or autism. This study was designed to develop a digilog game play therapy contents that was combined analog and digital. We infer that this contents is effective game play therapy not only for ordinary people but also for dementia old man, or intellectual disorder man. Also We are going to develop a new digilog play game system for preventing children's smartphone addiction.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.1
• /
• pp.51-58
• /
• 2015

Internet of Thing is a collection of various technical components, and the interworking among heterogeneous devices, networks, applications is expected to be accelerated through the openness of IoT platform. For this reason, many technical and administrative security threats will occur in IoT environments. In this paper, authentication methods of recent researches are analyzed for safe IoT services, and new mutual authentication protocol is proposed to provide more secure communication. The proposed protocol prevents an impersonation as malicious gateway or illegal device providing mutual authentication between gateway and IoT device. The performance analysis and evaluation of proposed authentication protocol are performed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.225-228
• /
• 2017

In this paper, we propose a methodology to deal with the IOT system gradually as the use of effective systems such as electronic devices, healthcare, smart cars, smart home, remote meter reading and telemedicine closely related to our real life in the IOT system An IOT integrated account solution is needed as a way to address these needs as the demand grows for the need to identify and manage how users access and use the system for what period of time and at what point in time. We propose the communication algorithms for endpoint system, IOT system management rights policy, user information, and how to apply them to IOT system smart car and smart home on each object internet.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1163-1175
• /
• 2016

In recent years, microgrids have been the focus of considerable attention in distributed energy distribution. Microgrids contain a large number of power electronic devices that can potentially cause negative impedance instability. Harmonic impedance is an important tool to analyze stability and power quality of microgrids. Harmonic impedance can also be used in harmonic source localization. Precise measurement of microgrid impedance and analysis of system stability with impedances are essential to increase stability. In this study, we introduce a new square wave current injection method for impedance measurement and stability analysis. First, three stability criteria based on impedance parameters are presented. Then, we present a new impedance measurement method for microgrids based on square wave current injection. By injecting an unbalanced line-to-line current between two lines of the AC system, the method determines all impedance information in the traditional synchronous reference frame d-q model. Finally, the microgrid impedances of each part and the overall microgrid are calculated to verify the measurement results. In the experiments, a simulation model of a three-phase AC microgrid is developed using PSCAD, and the AC system harmonic impedance measuring device is developed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.363-369
• /
• 2004

We propose, for the first time to our knowledge, a novel gain-clamping method for EDFA in WDM add/drop networks by introducing a disturbance observer technique. The control input signal for gain-clamping is composed of a nominal control signal and an additional control signal of compensating the gain fluctuations caused by channel add/drops. Based on disturbance observer technique, we designed the additional control signal such that it has the compensating information of estimated disturbance resulted from channel add/drops. The circuit for generating additional control signal can easily be implemented by using simple electronic devices. We proved the superiority of the new technique over the previous ones by showing simulation results of minimized dips and spikes that appear in power profile of EDFA in the process of channel add/drops.