• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.920-928
• /
• 2015

Transformerless solar inverters have a higher efficiency than those with an isolation link. However, they suffer from a leakage current issue. This paper proposes a family of single phase six-switch transformerless inverter topologies with an ac bypass circuit to solve the leakage current problem. These circuits embed two unidirectional freewheeling current units into the midpoint of a full bridge inverter, to obtain a freewheeling current path, which separates the solar panel from the grid in the freewheeling state. The freewheeling current path contains significantly fewer devices and poor performance body diodes are not involved, leading to a higher efficiency. Meanwhile, it is not necessary to add a voltage balancing control method when compared with the half bridge inverter. Simulation and experiments are provided to validate the proposed topologies.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.133-136
• /
• 2008

This paper presents a novel soft switching topology with resonant DC-DC converter and inverter. The resonant DC-DC converter consists of the auxiliary switch, resonant capacitor and inductor. All switches in the proposed topology is turn on at ZCS and turn off at ZVS operation. The proposed soft switching technology can be obtained the reduced switching losses and voltage and current stress of the power devices. Therefore, the resonant converter efficiency is higher than conventional boost converter. Simulation results on a 1kW soft switching converter are presented.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.543-545
• /
• 1993

This paper decribed the development of Thermal Imaging Oservation System(TIOS) using the serial-parallel scan method. The detectors scan five lines at a tine. These are put into serial order by electronic scan converter. Digital memory and high speed multiplexer are used for the serial conversion instead of charge coupled devices. As a result, thermal imaging system be presented with exellent performance which MRTD value is less than $0.5^{\circ}K$ at 7.5 cycles/mm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.80-84
• /
• 2012

Recently, the small scale photovoltaic (PV) electronic devices are drawing attention as the upcoming PV generation system. The PV system is commonly used in small scale PV applications such as LED lighting and cell phone. This paper proposes photovoltaic output sensorless (POS) maximum power point tracking (MPPT) control for a small scale charging system of PV-nickel metal hydride battery using field-programmable gate array (FPGA) controller. A converter is connected to a small scale PV cell and battery, and performs the POS MPPT at the battery terminal current instead of being at the PV cell output voltage and current. The FPGA controller and converter operate based on POS MPPT method. The experimental results show that the nickel metal hydride battery is charged by the maximum PV output power.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2185-2191
• /
• 2009

Wind power and photovoltaic(PV) generation systems are the fastest growing sources of renewable energy. The nonlinear devices, such as power electronic converter or inverter, of wind power and PV generation systems are the source of harmonics in power systems. The harmonic-related problems can have significant detrimental effects in the power system, such as capacitor heating, data communication interference, rotating equipment heating, transformer heating, relay misoperation and switchgear failure. There is a greater need for harmonic analysis that can properly maintain the power quality. By measuring harmonics of existing wind power and PV generation systems as harmonics modeling, the studies were made to see the harmonic impact of grid-connected wind power and PV generation systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.11-11
• /
• 2010

Supramolecualr ordering has been actively studied due to it's possible applications to the fabrication processes of nano-electronic devices. Van der Waals interaction and hydrogen bonding are frequently studied mechanisms for various molecular structures based on non-uniform charge distributions. Halogen atoms in molecules can have electrostatic interactions with similar strength. Big halogen atoms have strong non-uniform charge distributions. To study molecular orderings formed by hydrogen and halogen interactions, we chose a molecular system containing oxygen, hydrogen, and bromine atoms, a bromo-quinone. A two-dimensional molecular network was studied on Au(111) using a low-temperature scanning tunneling microscope. Bromo-quinonemolecules form self-assembled square grids having windmill structures. Their molecular orderings, chiral structures, and defects are explained in terms of hydrogen and halogen interactions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.102-102
• /
• 2010

One or two-dimensional nanostructures such as nanowires or nanomats have been widely uses as building blocks for nanoscale electronic devices. Nanofiber is one of sub-category of nano structures, it is easy to make nano-sized fiber by electrospinning technique. Nanofiber has large surface area as compared with their volume, it could be widely applied to many areas easily. Electrospinning technique is easy to control their structures and morphology safely and cost-effectively. We made nano-rings as a model of one dimensional nanostructures by electrospinning technique. To our knowledge, there were no reports on the preparation and investigation of alumina nano-rings by electrospinning technique. In this study, aluminum oxide nano-rings were produced after electospinning and calcination. The synthesized aluminum oxide nano-rings were characterized by scanning electron microscopy (SEM) to identify the morphology and the diameter of the ring, X-ray diffraction (XRD) to verify the crystallinity of the aluminum oxide, and X-ray photoelectron spectroscopy (XPS) for investigation of the chemical nature of the synthesized nano-rings.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.40-40
• /
• 2010

Employing synchrotron radiation based photoemission spectroscopy (PES) and scanning tunneling microscopy (STM), our group have investigated Si surfaces, various graphenes and molecular nanolayers. In this talk, I introduce recent results on the surface related systems. All experiments have been performed at the surface science beamlines, 3A2 and 7B1, in Pohang Accelerator Laboratory, where high resolution PES (HRPES) and angle resolved PES (ARPES) are available. Metals or molecules are adsorbed and sometimes extreme ultraviolet is irradiated onto surfaces to give them special functions. I show several examples for surface functionalzation and how to characterize solid surface using the analysis techniques. In particular, lots of ARPES and STM data are provided from graphenes, a strong candidate for replacing Si and conducting oxide currently used in many electronic and optical devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.354-354
• /
• 2010

Supramolecualr ordering has been actively studied due to it's possible applications to the fabrication processes of nano-electronic devices. Van der Waals interaction and hydrogen bonding are frequently studied mechanisms for various molecular structures based on non-uniform charge distributions. Halogen atoms in molecules can have electrostatic interactions with similar strength. Big halogen atoms have strong non-uniform charge distributions. To study molecular orderings formed by hydrogen and halogen interactions, we chose a molecular system containing oxygen, hydrogen, and bromine atoms, a bromo-quinone. A two-dimensional molecular network was studied on Au(111) using a low-temperature scanning tunneling microscope. Bromo-quinone molecules form self-assembled square grids having windmill structures. Their molecular orderings, chiral structures, and defects are explained in terms of hydrogen and halogen interactions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.56-56
• /
• 2010

We report a low-temperature fabrication of organic/inorganic nanohybrid dielectrics for organic thin film transistors. The self-assembled organic layers (SAOLs) were grown by repeated sequential adsorptions of C=C-terminated alkylsilane and metal (Al or Ti) hydroxyl with ozone activation, which was called "molecular layer deposition (MLD)". The $TiO_2$ and $Al_2O_3$ inorganic layers were grown by ALD, which relies on sequential saturated surface reactions resulting in the formation of a monolayer in each sequence and is a potentially powerful method for preparing high quality multicomponent superlattices. The MLD method combined with ALD (MLD-ALD) was applied to fabricate SAOLs-$Al_2O_3$-SAOLs-$TiO_2$ nanohybrid superlattices on polymer substrates at relatively low temperature. The MLD method is an ideal fabrication technique for various flexible electronic devices.