• Journal of the Korean Society of Safety
• /
• v.22 no.2 s.80
• /
• pp.1-7
• /
• 2007

A problem of a unsteady time-dependent flow in a channel is of practical importance and widely considered in the design of devices such as heat exchangers, duct, and electronic equipments. The characteristics of fluid flow in channel with oscillating vortex generator was investigated experimentally. The main object of this study was to investigate the effect of the excited frequency, the excited amplitude, and Reynolds numbers on the generated frequency. Flow patterns were visualized using smoke generator and generated frequencies were measured using hot wire anemometer. When the excited frequency is increased, excited amplitude decreased and Reynolds number increased, the strength of PSD of generated frequency is decreased.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.177-181
• /
• 2008

The more improved the Internet and the information technology, the stronger cryptographic system is required which can satisfy the information security on the platform of personal hand-held devices or smart card system. This paper introduces a case study of designing an elliptic curve cryptographic processor of a high performance that can be suitably used in a wireless communicating device or in an embedded system. To design an efficient cryptographic system, we first analyzed the operation hierarchy of the elliptic curve cryptographic system and then implemented the system by adopting a serial cell multiplier and modified Euclid divider. Simulation result shows that the system was correctly designed and it can compute thousands of operations per a second. The operating frequency used in simulation is about 66MHz and gate counts are approximately 229,284.

• Journal of Multimedia Information System
• /
• v.1 no.1
• /
• pp.23-43
• /
• 2014

With the rapidity of the development on electronic technology, various mobile devices are produced to make human life more convenient. The user is always in constant search of middle with ease of deployment. Therefore, the development of infrastructure and application with ubiquitous nature gets a growing keen interest. Recently, the number of pervasive network services is expanding into ubiquitous computing environment. To get desired services, user presents personal details about this identity, location and private information. The information transmitted and the services provided in pervasive computing environments (PCEs) are exposed to eavesdropping and various attacks. Therefore, the need to protect this environment from illegal accesses has become extremely urgent. In this paper, we propose an anonymous authentication and access control scheme to secure the interaction between mobile users and services in PCEs. The proposed scheme integrates a biometric authentication in PKI model. The proposed authentication aims to secure access remote in PCE for guaranteeing reliability and availability. Our authentication concept can offer pervasive network service users convenience and security.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.760-763
• /
• 2004

The recent growth in the use of impactive and nonlinear loads, electronic, and medical devices sensitive to power quality has caused many power quality problems and power supply-and-demand problem. Recently, in power system not only the reliability of the power supply but also the DVR(Dynamic Voltage Restorer), UPS, and APF are being studied more and more. Hence, in this paper, Voltage sag detection algorithm for voltage sag corrector is proposed. Also, simple circuit for the experimental voltage sag is Introduced.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.566-569
• /
• 2004

The recent growth in the use of impactive and nonlinear loads, electronic devices sensitive to power quality has caused many power quality problems. Recently, in power system, not only the reliability of the power supply but also the DVR(Dynamic Voltage Restorer) are being studied more and more. The DVR is a series compensator which can instantaneously compensate a voltage variation in supply side, and is a more effective than a existing UPS(Uninterruptible Power Supply) which can be only used in limited range of loads such as single load. Hence, in this paper, a study of inverter side L-C filter output Voltage for DVR is discussed.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.535-537
• /
• 2008

This paper proposes a modularized two-stage charge equalization converter for a series-connected lithium-ion battery string. In this paper, the series-connected battery sting is modularized into M modules, and each module has K cells in series. With this modularization, low voltage stress on the electronic devices can be achieved. A two-stage dc-dc converter with cell selection switches is employed. The first stage dc-dc converter steps down the high bus voltage to about 10 V. The second stage dc-dc converter integrated with selection switches equalizes the cell voltages. A prototype for 88 lithium-ion battery cells is optimally designed and implemented. Experimental results verify that the proposed equalization method has good cell balancing performance showing low voltage stress, small size, and low cost.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.3
• /
• pp.100-107
• /
• 2002

In this paper, we propose an expert system for electronic interlocking which enhances the safty, efficiency and expanability of the existing system by designing real-time interlocking control based on the interlocking table automatically generated using artificial intelligence approach. The expert system consists of two parts; an interlocking table generation part and a real-time interlocking control part. The former generates automatically the interlocking relationship of all possible routes by searching dynamically the station topology which is obtained from station database. On the other hand, the latter controls the status of station facilities in real-time by applying the generated interlocking relationship to the signal facilities such as signal devices, points, track circuits for a given route. The expert system is implemented in C language which is suitable to implement the interlocking table generation part using the dynamic memory allocation technique. Finally, the effectiveness of the expert system is proved by simulating for the typical station model.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.6
• /
• pp.1001-1009
• /
• 1994

The present paper deals with a new developed sensor for measuring the time-varying magnetic fields and describes the experimental results of trasient magnetic field that takes place during the operations of electric appliance. The operation principle of the self-integrating magnetic field sensor by using coaxial cable is analyzed and a calibration investigation is carried out. The frequency bandwidth of the magnetic field measurement system is from 40 Hz to about 300 kHz. The magnetic field induced by the starting and/or operation of electric appliance mainly includes the odd harmonics such as the third, the fifth and the seventh harmonics. The magnetic field intensity caused during the operation of ultrasonic washer is inversely proportional to distance, this correspodns to induction component. As a result, it was known that the odd harmonics of magnetic field in the desing of electromagnetic shield employed for protecting electronic circuit and control devices have to be considered.

• KIEE International Transactions on Power Engineering
• /
• v.5A no.4
• /
• pp.344-349
• /
• 2005

In conventional small signal stability analysis, the system is assumed to be invariant and the state space equations are used to calculate the eigenvalues of the state matrix. However, when a system contains switching elements such as FACTS equipments, it becomes a non-continuous system. In this case, a mathematically rigorous approach to system small signal stability analysis is performed by means of eigenvalue analysis of the system's periodic transition matrix based on the discrete system analysis method. In this paper, the RCF (Resistive Companion Form) method is used to analyze the small signal stability of a non-continuous system including switching elements. Applying the RCF method to the differential and integral equations of the power system, generator, controllers and FACTS equipments including switching devices should be modeled in the form of state transition equations. From this state transition matrix, eigenvalues that are mapped into unit circles can be computed precisely.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.462-463
• /
• 2006

본 논문에서는 당사에서 개발한 Digital Relay 및 Meter와 같은 IED들의 고장/이벤트 파형을 분석하는 툴인 Wave Analyzer를 소개한다. 기존 당사 파형 분석 툴들은 각기 하나의 IED에 대해서만 적용 가능하였으나 Wave Analyzer는 당사의 모든 IED에 대해 적용 가능하도록 통합형으로 개발하였다. 또한 고조파 분석, 벡터 다이어그램 등 파형 분석에 필요한 다양한 기능을 제공한다. Wave Analyzer는 다양한 기능을 가지고 있으며 모든 IED에 적용할 수 있어 당사 IED를 사용하는 사용자들에게 보다 편리함과 유용함을 제공할 것이다.