• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.9
• /
• pp.913-919
• /
• 1991

For an elementary study of the molecular electronic devices, in this study, N-alkylpyridinium(TCNQ) (1:1) and (1:2) complexed were synthesized. These complexes were verified by the UV, IR and the elemental analysis. Deposition of the LB films were verified by the reciprocal capacitance, UV absorbance and decresement area of Langmuir fims as functions of number of layers. The internal voltage of LB membrane devices fabricated with Y-type resides in 100-300mV. Finally, it seemed that self-polarization of LB membrance generates internal voltage.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.10
• /
• pp.489-493
• /
• 2001

The on-current of offset and LDD structured devices in slightly decreased while the off-current are remarkably reduced and almost constant independent of gate and drain voltage because offset and LDD regions behave as a series resistance and reduce the lateral electric field in the drain depletion. Degradation of these devices is dependent upon the offset and LDD length rather than doping concentration in these regions. Also, degradation mechanism has been related to the interface generation rather than the hot carrier injection into gate oxide.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1049-1050
• /
• 2006

This paper is proposed to a novel DC-DC converter operated high efficiency for loss-less snubber capacitor. The general converters of high efficiency is made that the power loss of the used switching devices is minimized. To achieve the soft switching operation of the used control switches, the proposed converter is constructed by using a loss-less snubber capacitor. The proposed converter achieves the soft-switching for all switching devices without increasing their voltage and current stresses. The result is that the switching loss is very low and the efficiency of converter is high. The soft switching operation of the proposed converter is verified by digital simulation and experimental results.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.68.2-68.2
• /
• 2012

We present a scheme for monolithically integrating aligned arrays of single walled carbon nanotubes (SWNTs) with sheets of graphene, for use in electronic devices. Here, the graphene and arrays of SWNTs are formed separately, using chemical vapor deposition techniques onto different, optimized growth substrates. Techniques of transfer printing provide a route to integration, yielding two terminal devices and transistors in which patterned structures of graphene form the electrodes and the SWNTs arrays serve as the semiconductor. Electrical testing and analysis reveal the properties of optically transparent transistors that use this design, thereby giving insights into the nature of contacts between graphene and SWNTs.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.63.1-63.1
• /
• 2012

In recent years, the functional inks for printed electronics that can be combined with a variety of printing techniques have attracted increasingly significant interest for use in low cost, large area, high performance integrated electronics and microelectronics. In particular, the development of solution-processable conductor, semiconductor and insulator materials is of great importance as such materials have decisive impacts on the electrical performance of various electronic devices, and, therefore, need to meet various requirements including solution processability, high electrical performance, and environmental stability. Semiconductor inks such as IGO, CIGS are synthesized by chemical solution method and microwave reaction method for TFT and solar cell application. Fine circuit pattern with high conductivity, which is valuable for flexible electrode for PCB and TSP devices, can be printed with highly concentrated and stabilized conductor inks such as silver and copper. Solution processed insulator such as polyimide derivatives can be use to all printed TFT device. Our research results of functional inks for printed electronics provide a recent trends and issues on this area.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1297-1302
• /
• 2004

CBTC(Communication Based Train Control) System has many superior train control performances than conventional track-circuit-based train control system with higher train operation efficiency, and less installation and maintenance cost. It is expected that CBTC will replace the conventional train control systems in near future. As CBTC has different mechanisms from conventional track-circuit-based train control systems in identifying train positions, and communicating information between train and ground facility, we have to pay a earful attention to making the interface between CBTC equipments and other signalling devices. This paper provides the construction of the interface between CBTC equipment and other signalling equipments such as TTC(Total traffic Control) system. ATO. electronic interlocking devices.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1598-1601
• /
• 2002

Bluetooth technology of cable replacement and infrastructure access is verified enough to be commercialized as goods. But there are a lot of works to implement ad-hoc Bluetooth radio network. for this, scatternet must be formed. We propose routing layer, packet format and link formation schemes for scatternet. The page procedure of the route request and the route reply page eliminates the procedure of the inquiry and the master-slave role switching. The route discovery time could be lower than 50msec within the distance of 50m. Proposed link formation scheme lets master, slave and bridge establish connection automatically and offers active ad-hoc environment. Devices that adopt Bluetooth module of 10m transmission range can communicate with other devices far away without any intervention of users.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.629-634
• /
• 2002

Demands for the automatic measurement on angle and depth of equipment were arisen for the better construction in deep mixing method and grouting method. Civil, geotechnical, electronic, and communication experts worked together for the development of automatic measuring devices using wire and wireless transmitting-receiving set. The results on the development of automatic devices in an industrial installation will be presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.59-60
• /
• 2015

Wireless power transfer is a technique that supplies the necessary power to the various electronic devices over the air without wires. The technology is classified as near-field wireless power transfer technology using inductive coupling and far-field wireless power transfer technology using antenna. In this paper, RTLS tag for high-precision positioning and wireless power transfer module was designed in order to solve the power supply problem for facility management. was designed for high-precision positioning is possible RTLS tags and wireless charging. The wireless charging pad provides the capability to charge up to four devices using he magnetic resonance system.

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.1754-1756
• /
• 2000

Organic semiconductors based on fused-ring polycyclic aromatic hydrocarbon have great potential to be utilized as an active layer for electronic and optoelectronic devices. In this study, pentacene thin films and electrode materials were deposited by Organic Molecular Beam Deposition(OMBD) and vacuum evaporation respectively. For the gate dielectric, polyamic acid was spin-coated and cured into polyimide at 350$^{\circ}C$. Electrical characteristics of the devices were investigated, where the channel length and width was 50${\mu}m$ and 5mm. It was found that field effect mobility was 0.012$cm^{2}/Vs$, and on/off current ratio was $10^5$.