• Journal of Biomedical Engineering Research
• /
• v.32 no.3
• /
• pp.251-256
• /
• 2011

Virtual colonoscopy is favored over conventional colonoscopy because its non-invasive procedure can avoid complications that may happen in a conventional approach and because it can cleanse colon electronically instead of uncomfortable conventional colon cleansing. Electronic Colon Cleansing(ECC) has to deal with not only removing tagged fecal material but also recovering Partial Volume Effect(PVE) due to tagging material. This paper proposes an ECC method restoring inherent natural PVE while previous approaches focused only on reducing PVE due to tagged fecal material. The proposed method reduces PVE using 3-dimensional adaptive density correction and then replaces tagged fecal material into air. Next, it generates natural PVE for the replaced air adjacent to soft tissue and finally makes smooth transition of gray values for soft tissue adjacent to the replaced air. The proposed method applied to eleven patient data, and showed promising results.

• Journal of the Korean institute of surface engineering
• /
• v.42 no.5
• /
• pp.208-215
• /
• 2009

We employed atmospheric plasma to reactively remove the lubricant sprayed onto such industrial electronic parts as LCD chassis during sheet-metal forming processes and investigated basically the effect of plasma parameters on cleansing the surfaces of zinc-electroplated steel plates (EGI). Specimen prepared with some controlled amount of lubricant sprayed on their surfaces beforehand were subjected to two different kinds of atmospheric plasma, one being generated by using air and the other generated by using nitrogen (99.9% purity). Locating the plasma beams at the height range between 3.5 and 13.5 mm from the surface of each specimen and radiating for 5 to 30 seconds resulted out that the cases with a position of 3.5 mm and a duration of 5 seconds or longer showed the surfaces completely cleansed without a trace of lubricant. Furthermore we found out that the plasma generated by using simple air depicted higher cleansing ability than the other one generated by using expensive nitrogen, interestingly useful very much for industrial purposes. On another aspect, we confirmed that the drilled or cut surfaces of Zn-plated steel substrate would not be oxidized even under the influence of plasma during its cleansing process. Therefore, we could probably conclude from this fore-survey that a dry process adopting atmospheric plasma for cleansing industrial parts might be determined to become successful in terms of commercialization, cautiously.

• Journal of the Korean Vacuum Society
• /
• v.18 no.2
• /
• pp.97-101
• /
• 2009

In the modem semiconductor industry, the progress that consumes the most capital and labor is cleansing process. Cleansing process is to remove impurities that can affect the operation of the device and deteriorate its function. Especially, Photoresist (PR) progress that etches the device always requires cleansing at the end of the progress. Also, HDI-PR (High-Dose Ion-implanted Photoresist) created from PR progress is difficult to remove. Thus, in modem IC cleansing, many steps of cleansing are used, including dry and wet cleansing. In this paper, we suggested to combine existing dry-cleansing and wet-cleansing, each represented by plasma cleansing and stripper solution, as Plasma Liquid-Vapor Activation (PLVA). This PLVA method enhances the effect of existing cleansing solution, and decreases the amount of solution and time required to strip. We stripped HDI-PR by activated solution and measured surface hardness and Young's modulus by Nano-indenter. Nano-indenter is the equipment that determines the hardness and the modulus of elasticity by indenting nano-sized tip with specific shape into the surface and measuring weight and z-axis displacement. We measured the change of surface hardness and Young's modulus before and after the cleansing. As a result, we found out that the surface hardness of the sample sharply decreased after the cleansing by plasma-activated PR stripper solution. It can be considered that if physical surface-cleansing process is inserted after this, more effective elimination of HDI-PR is possible.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.18
• /
• pp.8351-8358
• /
• 2016

Electronic cleansing is an image post processing technique in which the tagged colonic content is subtracted from colon using CTC images. There are post processing artefacts, like: 1) soft tissue degradation; 2) incomplete cleansing; 3) misclassification of polyp due to pseudo enhanced voxels; and 4) pseudo soft tissue structures. The objective of the study was to subtract the tagged colonic content without losing the soft tissue structures. This paper proposes a novel adaptive method to solve the first three problems using a multi-step algorithm. It uses a new edge model-based method which involves colon segmentation, priori information of Hounsfield units (HU) of different colonic contents at specific tube voltages, subtracting the tagging materials, restoring the soft tissue structures based on selective HU, removing boundary between air-contrast, and applying a filter to clean minute particles due to improperly tagged endoluminal fluids which appear as noise. The main finding of the study was submerged soft tissue structures were absolutely preserved and the pseudo enhanced intensities were corrected without any artifact. The method was implemented with multithreading for parallel processing in a high performance computer. The technique was applied on a fecal tagged dataset (30 patients) where the tagging agent was not completely removed from colon. The results were then qualitatively validated by radiologists for any image processing artifacts.

• Journal of KIISE:Software and Applications
• /
• v.35 no.8
• /
• pp.493-500
• /
• 2008

This paper proposes an electronic colon cleansing method using a patient CT profile for a virtual colonoscopy. The proposed method extracts the colon using cubic seeded region growing, and removes tagged materials adjacent to the colon. Residuals produced by a partial volume effect at the boundary of air-tagged material are deleted, and the removed soft tissue pixels due to a partial volume effect at the boundary of tagged material-soft tissue are recovered using a patient CT profile. The proposed method was applied to 16 virtual colonoscopy patient data sets, and produced promising results by a subjective evaluation of a radiologist and by a quantitative evaluation of a computer-aided diagnosis system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.649-652
• /
• 2007

최근 e-Business 어플리케이션을 통합하기 위한 개념으로 서비스 지향구조 (Service Oriented Architecture)에 기본 원리를 둔 분산 소프트웨어 통합 기술이 널리 확산되고 있다. 따라서 각 서비스간의 데이터 정제기법을 통한 신뢰성 있는 데이터 교환은 필수적 요소로 자리 잡고 있다. 본 논문에서는 시스템에 상호작용 시 교환되는 데이터의 오류를 탐지하고 정제하기 위한 서비스로 사용자의 데이터 제약조건을 결합 시키는 변환 과정, 오류를 탐지하는 탐지과정, 탐지된 오류를 정제하고, 정보를 보여주는 정제과정으로 이루어진 오류 데이터 정제 서비스(DDCS; Dirty Data Cleansing Service)를 구현하고, 이를 이용하여 SOA기반 ESB상에서 통합된 시스템들 간에 상호 작용하는 오류 데이터 정제를 보장하는 서비스를 개발한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.7
• /
• pp.1111-1120
• /
• 2013

Zizania latifola has used for folk medicine in Korea. It is effective in treating skin trouble and sensitivity skins. The purpose of this study was to develop high valuable types of bath preparation of Zizania latifolia. The natural materials were manufactured by the mixed ratio of Zizania latifolia. Product was manufactured by the mixed ratio of Zizania latifolia and 3 natural materials. Green tea was highest in sensory evaluation as similar with Zizania latifolia. optimum condition of mixed ratio was adaptive 50% Houttuynia cordata, 30% green tea with 20% Artemisia vularis. Product's sensory evaluation was showed best in mixing 40% and Zizania latifolia extract 60%. There were optimal condition for manufacturing of cleansing. Therefore, The development of a bath preparation used by Zizania latifolia is very useful for manufacturing cleansing. We suggest that it help for improve skin trouble and make healthy skin.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2069-2071
• /
• 1997

The power semiconductor switching devices(PSSD) continuously developed, Power Electronic Technology using PSSD is gradually extended. The high frequency inverter to generate the large power high frequency subject to power electronic technology pursuit various application. Also, in emboss with environmental destruction problem cause the atmosphere and the water pollution to growth of the commercial society, the research in favor of cleansing environmental a pollutant actively proceed. This paper describe study on the ozone generation power supply using the high frequency electric field method and the lamp type ozone generator using photochemistry, one of method of gene-rate ozone.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.2
• /
• pp.81-86
• /
• 2014

The process parameter in optimized KOH alkali activation of soft carbon series coke material in high purity was set with DOE experiments design. The activated carbon was produced by performing the activation process based on the set process parameters. The specific surface area was measured and pore size was analyzed by $N_2$ absorption method for the produced activated carbon. The surface functional group was analyzed by Boehm method and metal impurities were analyzed by XRF method. The specific surface area was increased over 2,000 $m^2/g$ as the mixing ratio of activation agent increased. The micro pores in $5{\sim}15{\AA}$ and surface functional group under 0.4 meq/g were obtained. The contents of the metal impurity in activated carbon which is the factor for reducing the electrochemical characteristics was reduced less than 100 ppm through the cleansing process optimization. The electrochemical characteristics of activated carbon in 38.5 F/g and 26.6 F/cc were checked through the impedance measuring with cyclic voltammetry scan rate in 50~300 mV/s and frequency in 10 mHz ~100 kHz. The activated carbon was made in the optimized activation process conditions of activation time in 40 minutes, mixing ratio of activation agent in 4.5 : 1.0 and heat treatment temperature over $650^{\circ}C$.

• The Journal of Pediatrics of Korean Medicine
• /
• v.29 no.4
• /
• pp.77-89
• /
• 2015

Objectives The purpose of this study is to analyze Korean clinical studies in Korean medicine and complementary and alternative medicine for allergic rhinitis and to propose for better methods of clinical studies and effective treatments on allergic rhinitis. Methods Electronic researches were performed with NDSL, RISS, KISTI, KISS, OASIS by keyword 'Allergic rhinitis'. Results The treatments used in 36 studies were herbal medicines, acupuncture, pharmacopuncture, moxibustion, cupping, inject medicine to nasal cavity, aroma therapy, ointment, nasal cleansing solution, laser treatment, infra-red therapy, oxygen nebulizer, diet treatment, moxa-pellet treatment, mindfulness meditation and space-spine manipulation techniques. The most common acupoints were LI4 and LI20 (Large Intestine Meridian). The most common methods of assessment is subjective nasal symptoms. All studies using subjective nasal symptoms and quality of life as assessment methods to show valid results on the improvement of allergic rhinitis. Conclusions This study shows that Korean medicine and complementary and alternative medicine on allergic rhinitis are effective. It will be expected to use that various methods for allergic rhinitis and more clinical studies for allergic rhinitis and pediatric patients needed in the future.