• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.5
• /
• pp.1243-1248
• /
• 2014

In General, LPI radar's detection probability by ES equipments is lower than that of conventional pulsed radar because of very low transmitting power and high antenna gain etc. LPI radar is a kind of RF stealth technique such as RCS reduction design. Therefore the ultimate goal of LPI radar is detection probability reduction by opponent. If one of the two, RCS value or LPI radar performance is not sufficient, own platform will be found first by opponent. In this paper, some considerations are suggested for detection probability reduction.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.105-112
• /
• 2006

To improve the performance of identification for radars in an ES(Electronic warfare Support) system, it is necessary to estimate scan characteristics as well as the basic identification parameters such as frequency, pulse repetition interval and pulse width of radars. This paper presents the method of estimating the scan period and the scan beam width of circular scanning radars. The proposed method estimates the scan period using the quality of the autocorrelation of a periodic signal. And, it estimates the scan beam width using the linear interpolation and the proposed method of estimating the scan period. Simulation results are presented to show the performance of the proposed method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.75-80
• /
• 2017

ES (Electronic Warfare Support System) collects radar signals, and analyzes the signals about frequency, pulse width, PRI (Pulse Repetition Interval), and etc. and then ES compares analyzed result with known radar signals to identify them. But there are two disadvantage. One is that use of known radar signals is in comparing step only. The other is that calculating PRI needs many operations. In this paper proposes a parallel reference correlation algorithm that uses GPGPU (General Purpose Graphics Processing Units) and can identify what signals are in received radar signals without calculating PRI.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.154-160
• /
• 2007

A direction finding system test-bed(DFSTB) at the electronic warfare communication-band is presented to efficiently evaluate and optimize the performance of the direction finding system through the indoor test setup. This test-bed gives a significant benefit to the designers of the direction finding system because it allows flexible test and design trade-off in the system design cycle. The system description and implementation of test-bed architecture, and the experiment results of direction finding accuracy according to modulation schemes are presented.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.973-974
• /
• 2008

As radar signal environments become denser and more complex, the capability of high-speed and accurate signal analysis is required for ES(Electronic warfare Support) system to identify individual radar signals at real-time. In this paper, we propose the new novel clustering algorithm of radar pulses to alleviate the load of signal analysis process and support reliable analysis. The proposed algorithm uses KDE(Kernel Density Estimation) and its CDF(Cumulative Distribution Function) to compose clusters considering the distribution characteristics of pulses. Simulation results show the good performance of the proposed clustering algorithm in clustering and classifying the emitters.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.33-40
• /
• 2006

A compact broadband active composite dipole antenna for direction finding system at the V/UHF-band is presented. It uses the composite structure which improves the antenna gain and the active circuit for broadband operation. This type of antenna has a high gain more than that of one dipole antenna within limited length(1m). The basic design and performance of both antenna structure and integrated active circuit are presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.4
• /
• pp.73-85
• /
• 2010

In dense electronic warfare signal environments, the conventional radar identification methods based on the basic parameters such as frequency, pulse width, and pulse repetition interval are confronted by the problem of identification ambiguity. To overcome this critical problem, a new approach introducing scan pattern of radars has been presented. Researches on new identification methods, however, suffer from a practical problem that it is not easy to secure the many radar signals including various scan pattern information and operation parameters. This paper presents a modeling method of radar signals with which we can generate radar signals including various scan pattern types according to the parameters determining the variation pattern of received signal strength. In addition, with the radar signals generated by the proposed model we analyze their characteristics according to the location of an electronic warfare support (ES) system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.3
• /
• pp.98-104
• /
• 2002

An airborne-based Direction-Finding System is developed for the application of ELINT and ES(Electronic Support). The system takes the phase-comparison technology, and has the configuration of multi-based antenna array for the solution of ambiguity due to the increased Direction-Finding resolution. This thesis describes the design of optimized distances among antennas, the electrical characteristics, the method of compensation, the direction-finding accuracy, and et. al. under the condition of the airborne-based environment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.165-170
• /
• 2020

In the rapidly growing new and renewable ESS parts and materials market, there is a limit for domestic SMEs to cope with the rapidly changing global new and renewable ESS market. There is a growing need to build a new and renewable ESS convergence commercialization support center. Therefore, through the establishment of a new and renewable ESS convergence professional evaluation center base, performance evaluation and standardization of new and renewable ESS products enhance product reliability. And By securing the reliability of new and renewable ESS, it is possible to promote domestic supply business and export activation. In addition, by supporting domestic research institutes and manufacturers to enhance their development capabilities and strengthen their competitiveness, and shortening the test cost and testing period according to the total-test evaluation system, it is possible anti-spill effect can be expected. Therefore, in this paper, we intend to study the establishment of a test certification center beyond the level of developed countries that can establish standardization for performance evaluation and demonstration.