• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.13-18
• /
• 2008

In this paper, we consider an amplifying-and-forward(AF) dual-hop relaying system where the source node transmits to a destination node with the help of R relay nodes. We assume that the source node equips M transmit antennas, but only one antenna is equipped at the each node of relay and destination. The outage probabilities are presented when the transmit maximum-ratio-combining(MRC) is used at the source-relay(S-R) links, and the best relay selection, which selects only one relay that contributes the most to the received signal-to-noise ratio(SNR) as active relay, is combined. Simulation results validate these analytical results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.8
• /
• pp.520-524
• /
• 2017

Electrical relay in an essential part of smart grids, electrical vehicles, and LED lightning systems. Therefore, studying relay reliability is important. Relays using permanent magnet actuators (PMAs), which are energy efficient, are also in the spotlight. However, most of the permanent magnets used in PMAs have a characteristic wherein the magnetic flux decreases as the temperature increases. When the magnetic flux is reduced, the force acting on the actuator is reduced. Therefore, in this study, we measured the decrease in the relay operating speed with permanent magnet reduction due to temperature rise. In addition, changes in the bouncing phenomena due to magnetic flux reduction were analyzed. As a result, the operating speed of the relay has decreased and the bouncing phenomenon has not significantly changed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.1074-1086
• /
• 2015

We Relay-assisted cellular network architecture has been developed to cover cell-edge users and to improve capacity. However, the deployment of relay stations (RSs) in cellular networks may increase the total energy consumption. Though energy efficiency has become a major concern in cellular networks, little work has studied the energy efficiency of relay-assisted cellular networks by sleep scheduling. In this paper, a distributed base stations (BSs) sleep scheduling scheme in relay-assisted cellular networks is proposed. The goal is to maximize the energy efficiency under the spectral efficiency constraint. Firstly, whether the BSs should be sleeping or active is determined by the traffic profile. Then, the transmission powers of the active BSs are optimized within the game-theoretic framework, by using an interior-point method, so as to maximize the energy efficiency. Simulation results demonstrate that the effectiveness of the proposed scheme is superior to that turning on all the BSs without sleep scheduling.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5253-5270
• /
• 2016

With device-to-device (D2D) communications, an inactive user terminal can be utilized as a relay node to support multi-hop communication so that connective experience of the cell-edge user as well as the capacity of the whole system can be significantly improved. In this paper, we investigate the spectrum sharing for a cooperative relay assisted D2D communication underlying a cellular network. We formulate a joint relay selection and channel assignment problem to maximize the throughput of the system while guaranteeing the quality of service (QoS) requirements of cellular users (CUs) and D2D users (DUs). By exploiting coalition formation game theory, we propose two algorithms to solve the problem. The first algorithm is designed based on merge and split rules while the second one is developed based on single user's movement. Both of them are proved to be stable and convergent. Simulation results are presented to show the effectiveness of the proposed algorithms.

• ETRI Journal
• /
• v.33 no.5
• /
• pp.806-809
• /
• 2011

This letter considers the channel estimation for two-way relay MIMO OFDM systems. A least square (LS) channel estimation algorithm under block-based training is proposed. The mean square error (MSE) of the LS channel estimate is computed, and the optimal training sequences with respect to this MSE are derived. Some numerical examples are presented to evaluate the performance of the proposed channel estimation method.

• International Journal of Contents
• /
• v.14 no.1
• /
• pp.18-27
• /
• 2018

The objective of this study was to derive approximate closed-form error rates for M-ary burst symbol transmission (MBST) of dual-hop adaptive decode-and-forward (ADF) cooperative relay systems over quasi-static Rayleigh fading channels. Within a burst, there are pilot symbols and data symbols. Pilot symbols are used for channel estimation schemes and each relay node's transmission mode selection schemes. At first, our focus was on ADF relay systems' error-events at relay nodes. Each event's occurrence probability and probability density function (PDF) were then derived. With error-event based approach, we derived a tractable form of PDF for combined signal-to-noise ratio (SNR). Averaged error rates were then derived as approximate expressions for arbitrary link SNR with different modulation orders and numbers of relays. Its accuracy was verified by comparison with simulation results.

• ETRI Journal
• /
• v.39 no.6
• /
• pp.803-812
• /
• 2017

A decode-and-forward system with an energy-harvesting relay is analyzed for the case when an arbitrary number of independent interference signals affect the communication at both the relay and the destination nodes. The scenario in which the relay harvests energy from both the source and interference signals using a time switching scheme is analyzed. The analysis is performed for the interference-limited Nakagami-m fading environment, assuming a realistic nonlinearity for the electronic devices. The closed-form outage probability expression for the system with a nonlinear energy harvester is derived. An asymptotic expression valid for the case of a simpler linear harvesting model is also provided. The derived analytical results are corroborated by an independent simulation model. The impacts of the saturation threshold power, the energy-harvesting ratio, and the number and power of the interference signals on the system performance are analyzed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.593-600
• /
• 2014

OFDMA systems solves frequency selective fading problem and provides improved performance by optimal allocation of subcarriers and transmit power. Two-way relay systems provide improved spectral efficiency compared to that of the conventional half-duplex relay using bidirectional communications. In legacy OFDMA system such as WiBro, two-way DF relay utilization causes pilot re-assignment and impossibility of channel estimation and decoding at relay nodes by self-interference. In this paper, resource allocation schemes for legacy OFDMA systems with two-way DF relay are proposed. The proposed schemes allocate subcarriers considering destinations nodes which are connected to relay nodes as individual nodes which are directly connected to a base station. Subsequently, the proposed schemes compensate bandwidth loss due to orthogonal allocations by overlapped allocating unused subcarriers at other noes. Numerical simulations show that the proposed resource allocation schemes provide improved performance compared with orthogonal allocation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.8
• /
• pp.2722-2742
• /
• 2014

We propose methods of linear transceiver design for two different power constraints, sum relay power constraint and per relay power constraint, which determine signal processing matrices such as base station (BS) transmitter, relay precoders and user receivers to minimize sum mean square error (SMSE) for multi-relay multi-user (MRMU) networks. However, since the formulated problem is non-convex one which is hard to be solved, we suboptimally solve the problems by defining convex subproblems with some fixed variables. We adopt iterative sequential designs of which each iteration stage corresponds to each subproblem. Karush-Kuhn-Tucker (KKT) theorem and SMSE duality are employed as specific methods to solve subproblems. The numerical results verify that the proposed methods provide comparable performance to that of a full relay cooperation bound (FRCB) method while outperforming the simple amplify-and-forward (SAF) and minimum mean square error (MMSE) relaying in terms of not only SMSE, but also the sum rate.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.671-676
• /
• 2015

Cooperative networks eliminate shadow area using relay and enhance communication performance by creating virtual multi input multi output (MIMO) system. In this paper, we analyze the performance of cooperative networks which use coherent modulation scheme in source-relay nodes and differential modulation scheme in relay-destination nodes depending on the relay location. We consider the performance analysis of systems with and without the direct transmission between source and destination node where the direct transmission adopts differential modulation scheme. In addition, the performance of the system with fully differential modulation scheme is compared with the system using partially differential modulation scheme. The performance of system is based on the symbol error rate between source and destination node.