• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1415-1418
• /
• 2006

The color electronic paper display panel, which is fabricated with about $300\;{\mu}m$ width of each color pixel strip and is possible to integrated into a fundamental full-color flexible display prototype, is presented. The monolayer of close-packed color electrophoretic microcapsules is formed on the ITO electrode. The color pixel strips are composed of each color electrophoretic microcapsules (i.e., cyan, magenta, yellow, and black).

• Journal of Information Display
• /
• 제4권1호
• /
• pp.1-8
• /
• 2003

Recent progress in both low pretilt and high pretilt defect free C1 surface stabilized ferroelectric liquid crystal (SSFLC) devices is reviewed. First, by numerical calculation to investigate the balance between surface azimuthal anchoring energy and bulk elastic energy within the confined chevron layer geometry of C1 and C2, it is possible to achieve a zigzag free C1 state by low azimuthal anchoring alignment with a low pretilt angle. The critical azimuthal anchoring coefficient for defect free C1 state is calculated. Its relationship with elastic constant, chevron angle as well as surface topography effect are also discussed. Second, using $5^{\circ}$ oblique SiO deposition alignment method a defect free, large memory angle, high contrast ratio and bistable C1 SSFLC display, which has potential for electronic paper applications has also been developed. The electrooptical properties and bistability of this device have been investigated. Various aspects of defect control are also discussed.

• 한국전기전자재료학회논문지
• /
• 제30권3호
• /
• pp.170-174
• /
• 2017

In 3 electrode reflective displays using a plastic substrate, unstable packaging induces particle clumping and optical degradation due to external air inflow and electronic ink evaporation. In this work, we fabricate 3 electrode electronic paper using glass wafer, ITO/plastic film, and ITO/glass/gas barrier film as an upper substrate after injecting electronic ink onto the lower substrate. Then, we studied its properties. After operating under stress conditions for 336 hours at $85^{\circ}C$ and 75% humidity, the reflectivity of driven e-paper panels with white color was 25.5% for the panels using glass wafer, 22.5% for plastic film including a gas barrier layer, and 16% for plastic film only. From these optical properties, we conclude that gas barrier film improves upper film isolation as a desirable packaging method.

• 반도체디스플레이기술학회지
• /
• 제20권1호
• /
• pp.7-11
• /
• 2021

The electrocardiogram(ECG) and heart rates are essential for diagnosing heart disease. However, conventional portable ECG devices are possible to only measure heart rates or have limitations in how and where they are measured. In this paper, a portable ECG system in which ECG waveforms and heart rates are displayed on smartphone screens is developed. A smartphone is used as display equipment instead of a computer screen for continuous monitoring. The developed ECG system filters and amplifies detected analog ECG signals. Next, it converts the amplified analog ECG signals into digital signals, then transmits to the smartphone via Bluetooth communication. This ECG system can display and store biomedical signals on a smartphone through the application. As a result, the waveform and heart rates of the developed portable ECG system has been confirmed to be similar to those of existing medical devices.

• 한국전기전자재료학회논문지
• /
• 제33권2호
• /
• pp.123-129
• /
• 2020

We analyzed the drift current by charged particles according to the loading methods applied into a closed cell by electronic ink at a reflective-type display panel using an electrophoretic mechanism. For this experiment, various panels were fabricated with injection voltages for electronic ink taking values in the range -4~0 V. The size of each cell was 220 ㎛ × 220 ㎛ and height of the barrier rib was 54.28 ㎛. The electronic ink was fabricated by mixing electrically neutral fluid and single-charge white particles. Drift current was measured by moving charged particles. A biasing voltage of 6 V was applied to the display panel. As a result, the drift current was proportional to the injection voltage for electronic ink, but it decreased in case of an injection voltage above -3 V. Our experimentation ascertained that the concentration of charged particles injected into closed cells is controlled by the injection voltage and the selective injection of charged particles above movable q/m is possible.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.432-435
• /
• 2004

The skin color of a human being is the important memory color influencing image quality for color display. Therefore, in this paper, the preferred skin color axis is defined on HSV color space by analyzing some previous research, and the preferred skin color reproduction algorithm is performed by rotating the center axis of skin distribution of an input image to the preferred skin color axis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.718-721
• /
• 2003

It is often desirable that manufacturers and users can convert the reference white of display into the preferred color temperature by controlling the color temperature that is one of representative color characteristics of a light source. Accordingly, this paper proposes an efficient method of color compensation for displaying the uncalibrated video signal in PDP-TV and is also shown to be successfully coupled with flexible color temperature conversion based on the signal processing technique.

• 전기전자학회논문지
• /
• 제9권2호
• /
• pp.101-107
• /
• 2005

본 논문에서는 전자 디스펜서(dispenser)용 제어기를 단일 칩으로 설계하였다. 전자 디스펜서는 전자부분과 기계부분으로 구성되며, 전자부분은 이력 키패드, 제어기, 디스플레이 모듈과 펌프모듈로 구성된다. 본 논문에서 설계한 제어기는 LCD 소자와 모터 펌프를 제어하며 VHDL을 이용하여 설계하였다. LCD 소자로서 WX12864AP1을 사용하였으며, 스테핑 모터로는 SPS20을 사용하였다. 이 제어기는 Altera사의 Quartus 툴을 사용하여 설계 후, Agent 2000 설계 키트와 APEX20K 소자를 사용하여 LCD 모듈과 모터모듈에 연결하여 동작 검증함으로, 동작이 원활히 이루어짐을 확인하였다. 본 논문에서는 전자 디스펜서의 제어기 설계를 통해 전자 디스펜서의 전용 칩을 ASIC으로 구현하여 바이오기술 분야의 기기에 적용할 수 있는 가능성을 제시하였다.

• 한국콘텐츠학회논문지
• /
• 제9권6호
• /
• pp.117-125
• /
• 2009

본 논문에서는 테이블탑 디스플레이 인터페이스를 기반으로 제작된 사용자 중심의 실감형 상호작용 전자책에 대하여 기술한다. 전자책은 일반 종이 책이 아닌 컴퓨터를 이용한 가상의 책으로 사용자가 독서를 하는 도중 동영상 자료를 보거나 배경음악, 무비클립, 애니메이션 등을 제공할 수 있는 멀티미디어 콘텐츠이다. 또한 제안하는 시스템의 기반이 되는 테이블탑 디스플레이는 손가락의 터치 점을 이용하여 다양한 명령을 수행할 수 있으므로 기존 입력장치에 비해 사용자가 보다 효과적으로 전자책을 체험하는 것을 돕는다. 본 논문에서는 기존 전자책과 차별화된 실감형 상호작용 전자책에 대한 새로운 방향을 제시하고, 사용자 중심의 제스처 명령을 정의하여 앞으로 컴퓨터와 사용자간의 상호작용을 원활하게 할 수 있는 시스템과 알고리즘을 제안한다.

• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.494-498
• /
• 2016

In this paper, we proposed the 3-dimenstional (3D) analysis for calculating the optical characteristics of an autostereoscopic display with electric field driven liquid crystal (ELC) lens. From 3D analysis considering the slanting of lens, we calculate the cross-talk of each images and the distortion of viewing zone. Using geometric opics and extended Jones matrix method (EJMM), phase retardation of ELC lens according to position is calcuated and then optical path difference in 3D space considering tilt and azimuth angle of incident light is gotten. Then, intensity distribution is presented in the space. Through camparing the intensity distribution using ideal lens with the ELC lens, we identify the noise and image distortion of ELC lens. As a result, this analysis is expected to provide optimum design conditions for realistic and rigorous 3D display with ELC lens.