• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.861-863
• /
• 2003

In this work, the preparations and characteristics of capacitors and inductors for RF IC as a integrated devices are investigated. These kinds of capacitors and inductors can be applicable to the passive components utilized in voltage controlled oscillator(VCO), low noise amplifier(LAN), mixer and synthesizer for mobile telecommunication of radio frequency band(900 MHz to 2.2GHz), and in a library of monolithic microwave integrated circuit(MMIC). The results show that these inductors and capacitors array for RF IC may be applicable to the RF IC passive components for mobile telecommunication.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.161-161
• /
• 2010

In order to achieve low power consumption and the uniform power spectrum of LED BLU (Back Light Unit) system, new circuits with a 2 stage L-C (Inductor-Capacitor) coupler have been proposed. From the simulation results based on our proposed model, the ripple power of the L-C regulation-embedded BLU circuit shows a dramatic reduction by more than 89.3% as compared to the normal BLU (without L-C circuits). This indicates that the proposed circuit is very promising for the realization of high-efficiency BLU circuits.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.123-127
• /
• 2000

In order to investigate the influence of manufacturing process on the electrical properties, we used two kinds of low density polyethylene prepared using metallocene catalyst (mL), linear low density polyethylene prepared using Ziegler catalyst (LL) and low density polyethylene by high pressure process (LD). mL has the narrowest composition and molecular weight distributions. We measured the dc and impulse breakdown strengths and current densities at 3$0^{\circ}C$, 6$0^{\circ}C$ and 9$0^{\circ}C$. mL had a higher breakdown strength and a lower high-field current than LD and LL. These results were discussed from the point of manufacturing processes.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.120.3-120
• /
• 1998

• Korean Journal of Optics and Photonics
• /
• v.19 no.6
• /
• pp.416-421
• /
• 2008

A scheme for predicting the concentration of a glucose solution based on its relative optical absorbance at multiple probe wavelengths was proposed and verified. The relative absorbance at each of the probe wavelength was obtained with respect to the absorbance at a reference wavelength. The single reference wavelength (1310 nm) and a group of four different probe wavelengths (1064, 1550, 1685, 1798 nm) were selected to exhibit the glucose absorbance with opposite signs, thereby enhancing the accuracy of the prediction. The final glucose concentration was estimated by taking the average of the predicted values provided by the four probe wavelengths. The absorbance of the glucose solution for the path length of 5 mm was $-1.42{\times}10^{-6}\;AU$/(mg/dL) at the reference wavelength of 1310 nm and peaked at $+8.12{\times}10^{-6}\;AU$/(mg/dL) at 1685 nm. The concentration of the glucose solution was decently predicted by means of the proposed scheme with the standard error of prediction of ${\sim}28\;mg/dL$. In addition, the influence of the ambient temperature and the fat thickness upon the prediction of the glucose concentration was examined. The absorption change with the temperature was $-9.1{\times}10^{-5}\;AU/^{\circ}C$ in the temperature range of $26{\sim}40^{\circ}C$ at the reference wavelength, and $-2.08{\times}10^{-2}\;AU/^{\circ}C$ at 1550 nm. And the absorption change with respect to the fat thickness was +1.093 AU/mm at the probe wavelength of 1685 nm.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.68
• /
• pp.1-21
• /
• 2015

The purpose of this study is to propose a new mechanism for the global transmission of electronic trade documents and to promote them using it. Trade settlement methods are changed from L/C bases to non-L/C bases and in particular, the telegraphic transfer is dramatically increased since mid 1990. But the status of transmission of electronic trade documents still rely on the letter of credit and bill of lading. So it need to change the process of transmission of electronic trade documents utilizing non-negotiable sea waybill instead of bill of lading. In this study, I pointed out two problems as obstacle factors in global transmission of electronic trade documents. First is the system connection problem between domestic and foreign banks and second is the electronic right transfer problem in the bill of lading. Electronic bill of lading has already been made, but are not used and e-Nego has also not been activated under the above issues. Therefore, it should be solved previously the above problems for the global transmission of electronic trade documents under the letters of credit. However, in transactions of transfer, it does not need the inter-bank connection and also does not occur the electronic right transfer problem of bill of lading if using the non-negotiable seaway bill instead of bill of lading. In this paper, I recommend the global transmission strategies of e-trade documents using the non-negotiable sea waybill in transactions of transfer. Hopefully, I expect the activation of global transmission of e-trade documents through the utilization of electronic non-negotiable sea waybill as suggested by this study.

• International Commerce and Information Review
• /
• v.15 no.2
• /
• pp.429-455
• /
• 2013

This paper investigates the extent and scope of electronization of Letter of Credit and examines the obstacles in the course of electronization of Letter of Credit. For this purpose, this paper adopts two track methodologies. First, we study the electronization of Letter of Credit in the macro perspective. It means that we analyze the scope and the extent of electronization of electronic Letter of Credit in the national economy as a whole. Second, we utilize the case study approach to examine the electronization of Letter of Credit in micro perspective. In other words we examine individual commercial banks in Korea. For this purpose, we analyze the data from two commercial banks out of four largest domestic banks in Korea. For example, we select two commercial banks in Korea and ask current status of electronization of Letter of Credit, i.e, the utilization of EDI L/C, e-L/C, and e-B/L. A major finding of our study is that the extent of electronization is not negligible in micro perspective as well as in macro perspective. In micro perspective, two commercial banks utilize EDI letter of credit in a critical sense. On the other hand, they seldom uses e-L/C and e-B/L in international transaction. This study shows that major bottlenecks for the electronization of Letter of Credit are pessimistic perception of SME entrepreneurs toward the electronization of Letter of Credit and the high costs of system building. We conclude that unlike superficial perception, there is a considerable progress toward the electronization of Letter of Credit in micro perspective.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.441-445
• /
• 2008

A series of aluminum complexes supported by $\beta$-ketoamino, ligand-bearing, 3-position substituents $LAlEt_2$ ($L=CH_3C(O)C(Cl)=C(CH_3)NAr\;(L_1)$, $L=CH_3C(O)C(H)=C(CH_3)NAr\;(L_2)$, $L=CH_3C(O)C(Ph)=C(CH_3)NAr\;(L_3)$, and $L=CH_3C(O)C(Me)=C(CH_3)NAr\;(L_4)$, $Ar=2,6-^iPr_2C6H_3$) were synthesized in situ and employed in the ring-opening polymerization (ROP) of $\varepsilon$-caprolactone ($\varepsilon$-CL) and cyclohexene oxide (CHO). The 3-position substituents on the $\beta$-ketoamino ligand backbone of the aluminum complexes influenced the catalyst activity remarkably for both ROP of $\varepsilon$-CL and CHO. Aluminum $\beta$-ketoamino complexes displayed different catalytic behavior in ROP of $\varepsilon$-CL and CHO. The order of the catalytic activity of $LAlEt_2$ was $L_1AlEt_2$>$L_2AlEt_2$>$L_3AlEt_2$>$L_4AlEt_2$ for ROP of $\varepsilon$-CL, being opposite to the electron-donating ability of the 3-position substituents on the $\beta$-ketoamino ligand, while the order of the catalytic activity for ROP of CHO was $L_1AlEt_2$>$L_3AlEt_2$>$L_4AlEt_2$>$L_2AlEt_2$. The effects of reaction temperature and time on the ROP were also investigated for both $\varepsilon$-CL and CHO.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.296-297
• /
• 2006

유기EL의 발광재료로 쓰일 수 있는 이핵 루테늄착체는 $Ru(bpy)_2Cl_2$와 새롭게 디자인한 가교체 (Bis(-2,2'-dipyridyl ketenylidene)-N,N-1,6-diphenylene diamine)의 반응으로부터 합성하였고, FT-IR, $^1H$-NMR, $^{13}C$-NMR, UV-vis, P.L, C.V를 이용하여 착체의 구조분석, 광학적 특성과 전기화학적인 특성을 측정하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.171-171
• /
• 2011

Co and Fe doped multi-wall carbon nano-tubes (MWCNTs) synthesized by microwave plasma enhanced chemical vapor deposition (PECVD) technique are investigated with synchrotron radiations at Pohang Light Source (PAL) and European Synchrotron Radiation Facility (ESRF). Near edge x-ray absorption spectroscopy (NEXAFS) measurement at C K, Co $L_{3,2}$ and Fe $L_{3,2}$-edges, and x-ray magnetic circular dichroism (XMCD) at Co and Fe $L_{3,2}$-edges have been carried at 7B1 XAS KIST and 2A MS beamline, respectively, to understand the electronic structure and responsible magnetic interactions at room temperature. X-ray absorption spectroscopy (XAS) at C K-edge shows significant p-bonding and Co and Fe L-edges proves the presence of $Co^{2+}$ and $Fe^{2+}$ in octahedral symmetry. Co and Fe doped MWCNTs show good XMCD spectra at 300K. The effect on the magnetism is also studied through swift heavy ion (SHI) radiations and magnetism is found enhanced and change in the electronic structure in Co-CNTs is investigated.