• Journal of Distribution Research
• /
• v.13 no.1
• /
• pp.1-33
• /
• 2008

As the interest in the business-to-business(B2B) electronic commerce is increasing, many companies are participating in the B2B e-Marketplaces. The e-Marketplace is defined as the virtual market that many players take part in to transact. The e-Marketplace has an influenced on the manner in which organizational buyers and sellers interact. As a result, it is important to develop an understanding of the behaviors of firms that use these electronic marketplaces. The purpose of this study is to develop a comprehensive model for trust and commitment of B2B e-Marketplace and empirically to examine their structural relationships. Drawing from trust and commitment theory in the interorganizational relationship and B2B electronic commerce context, this study identifies network externality, interactivity, justice, quality of information sharing, institutional assurance as the determinants of trust and commitment of e-Marketplace. The proposed model hypothesized that (1) trust is a function of network externality, interactivity, justice, quality of information sharing, institutional assurance, (2) attitudinal and behavioral commitment is a function of trust, (3) behavioral commitment is a function of attitudinal commitment. The proposed model is tested using organizational-level survey data from 187 buying organizations that conduct business in MRO e-Marketplaces. The data were tested by reliability test, correlation analysis, exploratory factor analysis, confirmatory factor analysis and covariance structure analysis. The results indicate that (1) trust is influenced by network externality, interactivity, justice, institutional assurance, (2) attitudinal commitment and behavioral commitment is influenced by trust (3) behavioral commitment is influenced by attitudinal commitment. Also, the empirical results confirmed that trust play a strong, central role in determinging e-Marketplace commitment. The key theoretical contribution of this research is that it begins to extend interorganizational information system literature in areas such as B2B Internet e-Marketplace. Managerially, this study contributes tn the understanding of the role of B2B e-Markeplace providers in Internet situation. And Limitations of this study and guidelines for future researches are also discussed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.5 s.311
• /
• pp.89-100
• /
• 2006

The carotid intima-media thickness (IMT) is very important, because the severity of it is an independent predictor of transient cerebral ischemia, stroke, and coronary events such as myocardial infarction. The conventional image processing to measure the IMT has not been satisfactory, because the methods have relied on the manual section drawing and a regional segmentation by differential estimation. We propose a new image processing technology effective to extract features from the carotid artery image whose pixels have the directional vector properties with composed color distribution. The technique we presented here is not by differential variation but by verification of the layer properties of carotid artery image. Iterated vertical and horizontal analysis and segmentation of the IMT image show the vector characteristics. This new technique makes it possible to cluster the layers statistically, and to classify mathematical correlation between regions and resulting in correct measurements of thickness and its variation. The advantages and effectiveness of this approach are applicable to region process and character extraction of such a vector image.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.2 no.2
• /
• pp.3-8
• /
• 2009

The traction system has been mainly used for rehabilitation and correction of patients with spine or gait diseases in orthopedics or at home. Some problems could occur in human body when patients forced their training using the traction system. So it needs to measure a traction force and control the training time. However, most of products on market have no sensor measuring traction force. Thus we designed and made a sensor detecting traction force using strain gauge, amplifier for transition to output signal and experiment devices for performance test. We carried out experiment of a sensor detecting a traction force and measured electric responses of it with respect to traction loads. Maximum error was within about 1% for experiments in static condition and the average error was about 0.7% for experiments in dynamic condition. We concluded that it is possible to use the developed sensor for measurement of traction force since the maximum output variation of a sensor detecting a traction force was about 0.3% in $0^{\circ}C-60^{\circ}C$ temperature condition.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.2
• /
• pp.88-109
• /
• 2020

This study aimed to distinguish categories of archival information and identify properties by their detail types, so that the various forms of architectural heritage information generated can be managed based on their attributes and characteristics. First, the specific uses of terms in the legal system were reviewed and their associated concepts specifically defined. "Architectural heritage" was defined as architecture belonging to the category of tangible cultural heritage as designated by law, and "architectural heritage archival information" was defined as all kinds of material expressed by electronic processing of the actual status for preservation and management. Next, the production status of architectural heritage archival information was reviewed in relation to the legal system. This confirmed that relevant legal systems were organized hierarchically and that various types of archival information were generated in a single project. Furthermore, it was confirmed that even archival information produced in the same form contained differing contents depending on the specific purpose and method, and that there was no classification by which to cover all archival information. Finally, it was also confirmed that detailed drawing types could be categorized according to the purpose of production and the target of the records. Based on the findings of this review, the type and properties of archival information were presented as the primary classification criteria, and the architectural heritage archival information was divided into 6 general types and 27 detailed types. Specifically, the linguistic form, dimension, temporal property, and graphic form of archival information were applied as criteria for the classification of general types, and the target, production purpose, production method of archival information, and content characteristics of archival information properties of archival information by type were comprehensively reviewed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.310-316
• /
• 2021

Conventional satellites are generally large satellites that are multi-functional and have high performance. However, small satellites have been gradually drawing attention since the recent development of lightweight and integrated electric, electronic, and optical technologies. As the size and weight of a satellite decrease, the barrier to satellite development is becoming lower due to the cost of manufacture and cheaper launch. However, solar panels are essential for the power supply of satellites but have limitations in miniaturization and weight reduction because they require a large surface area to be efficiently exposed to sunlight. Space solar cells must be manufactured in consideration of various space environments such as spacecraft and environments with solar thermal temperatures. It is necessary to study structural materials for lightweight and high-efficiency solar cells by applying an unfolding mechanism that optimizes the surface-to-volume ratio. Currently, most products are developed and operated as solar cell panels for space applications with a triple-junction structure of InGaP/GaAs/Ge materials for high efficiency. Furthermore, multi-layered junctions have been studied for ultra-high-efficiency solar cells. Flexible thin-film solar cells and organic-inorganic hybrid solar cells are advantageous for material weight reduction and are attracting attention as next-generation solar cells for small satellites.

• Strategy21
• /
• s.34
• /
• pp.58-92
• /
• 2014

Even after S. Korea took 5.24 Measure(24 May 2014), N. Korea has not stopped raising provocations such as the shelling of Yeonpyeong Island, electronic and cyber attacks. To make matters worse, the communist country lunched long-range missiles(twice) and conducted 3rd nuclear test, escalating tensions which could possibly lead to an all-out war. Korean Government failed to respond properly. However, escalation into an all-out war was deterred by the CFC immediately carrying out its peacetime duty(CODA). The US made a rapid dispatch of its augmentation forces(Aircraft carrier, nuclear-powered submarine, strategic bomber, F-22) to the Korean Peninsula. In recognition of the importance of the Combined Forces Command, since May 2013 the Park Geun-Hye Administration has been pushing ahead with re-postponement of Wartime Operational Control Transfer(which initially meant the disassembling of the CFC as of 1 December 2015) More recently, there has been a series of unusual indicators from the North. Judging from its inventory of 20 nuclear weapons, 1,000 ballistic missiles and biochemical weapons, it is safe to say that N. Korea has gained at least war deterrence against S. Korea. Normally a nation with nuclear weapons shrink its size of conventional forces, but the North is pursuing the opposite, rather increasing them. In addition, there was a change of war plan by N. Korea in 2010, changing 'Conquering the Korean Peninsula' to 'Negotiation after the seizure of the Greater Seoul Metropolitan Area(GSMA)' and establishing detailed plans for wartime projects. The change reflects the chain reaction in which requests from pro-north groups within the South will lead to the proclamation of war. Kim, Jeong-Un, leader of N. Korean regime, sent threatening messages using words such as 'exercising a nuclear preemptive strike right' and 'burning of Seoul'. Nam, Jae-June, Director of National Intelligence Service, stated that Kim, Jung-Un is throwing big talks, saying communization of the entire Korean Peninsula will come within the time frame of 3 years. Kim, Gwan-Jin, Defense Minister, shared an alarming message that there is a high possibility that the North will raise local provocations or a full-fledged war whenever while putting much emphasis on defense posture. As for the response concept of the Korean Government, it has been decided that 'ROK·US Combined Local Provocation Counter-Measure' will be adopted to act against local provocations from the North. Major provocation types include ▲ violation of the Northern Limit Line(NLL) with mobilization of military ships ▲ artillery provocations on Northwestern Islands ▲ low altitude airborne intrusion ▲ rear infiltration of SOF ▲ local conflicts within the Military Demarcation Line(MDL) ▲ attacking friendly ships by submarines. Counter-measures currently established by the US involves the support from USFK and USFJ. In order to keep the sworn promise, the US is reinforcing both USFK and USFJ. An all-out war situation will be met by 'CFC OPLAN5027' and 'Tailored Expansion Deterrence Forces' with the CFC playing a central role. The US augmentation forces stands at 690,000 troops, some 160 ships, 2,000 aircraft and this comprise 50% of US total forces, which is estimated to be ninefold of Korean forces. The CFC needs to be in center in handling both local provocations and an all-out war situation. However, the combat power of S. Korean conventional forces is approximately around 80% of that of N. Korea, which has been confirmed from comments made by Kim, Gwan-Jin, Defense Minister, during an interpellation session at the National Assembly. This means that S. Korean forces are not much growing. In particular, asymmetric capabilities of the North is posing a serious threat to the South including WMD, cyber warfare forces, SOF, forces targeting 5 Northwestern Islands, sub-surface and amphibious assault forces. The presence of such threats urgently requires immediate complementary efforts. For complementary efforts, the Korean Government should consider ① reinforcement of Korean forces; putting a stoppage to shrinking military, acquisition of adequate defense budget, building a missile defense and military leadership structure validity review, ② implementation of military tasks against the North; disciplinary measures on the sinking of ROKS Cheon-an/shelling of Yeonpyeong Islands, arrangement of inter-Korean military agreements, drawing lessons from studies on the correlation between aid for N. Korea, execution of inter-Korean Summit and provocations from the North, and ③ bolstering the ROK·US alliance; disregarding wartime operational control transfer plan(disassembling of CFC) and creation of a combined division.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.17 no.2
• /
• pp.59-66
• /
• 2013

Purpose: Recently, there is an increase of the number of hospitals using auto dispenser to reduce occupational radiation exposure when drawing up of the $^{18}F-FDG$ dose (5.18 MBq/kg) in a syringe from the dramatic high activity of $^{18}F-FDG$ multidose vial. The aim of this study is to confirm that using auto dispenser actually reduces the radiation exposure for technologists. Also we analyzed the reproducibility of auto dispenser to find optimized dispensing method for the device. Materials and Methods: We conducted three experiments. Comparison of radiation exposure on chest and hands: The chest and hands exposure dose received by technologists during the injection were measured by electronic personal dosimeter (EPD) and ring TLD respectively. Reproducibility of dispensed volume: We draw up the normal saline into 5 and 2 mL syringe using auto dispenser by changing the volume from 1 to 15 mm for 5 times in the same setting of the volume. The weight of 5 normal saline dispensed from the device at same volume was measured using micro balance and calculated standard deviation and coefficient of variation. Reproducibility of dispensed radioactivity: We dispensed 362.6 $MBq{\pm}10%$ of $^{18}F-FDG$ in 5 and 2 mL syringes from the multidose vial of different specific activity. In the same setting of volume, we repeated dispensing for 4 times and compared standard deviation and coefficient of variation of radioactivity between 5 syringes. Results: There was significant difference in the average of chest exposure dose according to the dispensing methods (P<0.05). Also, when dispensing $^{18}F-FDG$ in manual method, exposure dose was 11.5 times higher in right hand and 4.8 times higher in left hand than in auto method. In the result of reproducibility of dispensed volume, standard deviation and coefficient of variation shows decline as the dispensing volume increases. As a result of reproducibility of dispensed radioactivity, standard deviation and coefficient of variation increases as the specific activity increases. Conclusion: We approved that the occupational radiation exposure dose of technologists were reduced when dispensing $^{18}F-FDG$ using auto dose dispenser. Secondly, using small syringes helps to increase reproducibility of auto dose dispense. And also, if you lower the specific activity of $^{18}F-FDG$ in multidose vial below 915-1,020 MBq/mL, you can use auto dispenser more effectively keeping the coefficient of variation lower than 10%.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.12
• /
• pp.1098-1125
• /
• 2000

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 1998 and 1999 has been done. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environment. The conclusions are as follows. 1) A review of the recent studies on fluid flow, turbomachinery and pipe-network shows that many experimental investigations are conducted in applications of impingement jets. Researches on turbulent flows, pipe flows, pipe-networks are focused on analyses of practical systems and prediction of system performance. The results of noise reduction in the turbomachinery are also reported. 2) A review of the recent studies on heat transfer analysis and heat exchanger shows that there were many papers on the channel flow with the application to the design of heat exchanger in the heat transfer analysis. Various experimental and numerical papers on heat exchanger were also published, however, there were few papers available for the analysis of whole system including heat exchanger. 3) A review of the recent studies on heat pump system have focused on the multi-type system and the heat pump cycle to utilize treated sewage as the heat source. The defrosting and the frosting behaviors in the fin-tube heat exchanger is experimentally examined by several authors. Several papers on the ice storage cooling system are presented to show the dynamic simulation program and optimal operation conditions. The study on the micro heat pipes for the cooling of high power electronic components is carried out to examine the characteristics of heat and mass transfer processed. In addition to these, new type of separate thermosyphon is studied experimentally. 4) The recent studies on refrigeration/air conditioning system have focused on the system performance and efficiency for new alternative refrigerants. New systems operating with natural refrigerants are drawing lots of attention. In addition to these, evaporation and condensation heat transfer characteristics of traditional and new refrigerants are investigated for plain tubes and also for microfin tubes. Capillary tubes and orifice are main topics of research as expansion devices and studies on thermophysical properties of new refrigerants and refrigerant/oil mixtures are widely carried out. 5) A review of the recent studies on absorption cooling system shows that numerous experimental and analytical studies on the improvement of absorber performance have been presented. Dynamic analysis of compressor have been performed to understand its vibration characteristics. However research works on tow-phase flow and heat transfer, which could be encountered in the refrigeration system and various phase-change heat exchanger, were seemed to be insufficient. 6) A review of recent studies on duct system shows that the methods for circuit analysis, and flow balancing have been presented. Researches on ventilation are focused on the measurement of ventilation efficiency, and variation of ventilation efficiency with ventilation methods by numerous experimental and numerical studies. Furthermore, many studies have been conducted in real building in order to estimate indoor thermal environments. Many research works to get some information for cooling tower design have been performed but are insufficient. 7) A review on the recent studies on architectural thermal environment and building mechanical systems design shows that thermal comfort analysis is sitting environment, thermal performance analysis of Korean traditional building structures., and evaluation of building environmental load have been performed. However research works to improve the performance of mechanical system design and construction technology were seemed to be insufficient.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.249-254
• /
• 2022

With the rapid advance of the semiconductor and Information and communication technologies, remote environment monitoring technology, which can detect and analyze surrounding environmental conditions with various types of sensors and wireless communication technologies, is also drawing attention. However, since the conventional remote environmental monitoring systems require external power supplies, it causes time and space limitations on comfortable usage. In this study, we proposed the concept of the self-powered remote environmental monitoring system by supplying the power with the levitation-electromagnetic generator (L-EMG), which is rationally designed to effectively harvest biomechanical energy in consideration of the mechanical characteristics of biomechanical energy. In this regard, the proposed L-EMG is designed to effectively respond to the external vibration with the movable center magnet considering the mechanical characteristics of the biomechanical energy, such as relatively low-frequency and high amplitude of vibration. Hence the L-EMG based on the fragile force equilibrium can generate high-quality electrical energy to supply power. Additionally, the environmental detective sensor and wireless transmission module are composed of the micro control unit (MCU) to minimize the required power for electronic device operation by applying the sleep mode, resulting in the extension of operation time. Finally, in order to maximize user convenience, a mobile phone application was built to enable easy monitoring of the surrounding environment. Thus, the proposed concept not only verifies the possibility of establishing the self-powered remote environmental monitoring system using biomechanical energy but further suggests a design guideline.

• Journal of Science of Art and Design
• /
• v.7
• /
• pp.64-104
• /
• 2005

Visual media transmits image and information reproduced in large quantities, such as a photography, film, television, video, advertisement, or computer image. Correspondence to the students' reception and recognition of culture in the future. arrangements for the field of studies of visual culture. 'Visual Culture' implies cultural phenomena of visual images via visual media, which includes not only the categories of traditional arts like a painting, sculpture, print, or design, but the performance arts including a fashion show or parade of carnival, and the mass and electronic media like a photography, film, television, video, advertisement, cartoon, animation, or computer image. In the world of visual media, Image' functions as an essential medium of communication. Therefore, people call the culture of today fra of Image Culture', which has been converted from an alphabet convergence era to an image convergence one. Image, via visual media, has become a dominant means for communication in large part of human life, so we can designate an Image' as a typical aspect of visual culture today. Image, as an essential medium of communication, plays an important role in contemporary society. The one way is the conversion of analogue image like an actual picture, photograph, or film into digital one through the digitalization of digital camera or scanner as 'an analogue/digital commutator'. The other is a way of process with a computer drawing, or modeling of objects. It is appropriate to the production of pictorial and surreal images. Digital images, produced by the other, can be divided into the form of Pixel' and form of Vector'. Vector is a line linking the point of departure to the point of end, which organizes informations. Computer stores each line's standard location and correlative locations to one another Digital image shows for more 'Perfectness' than any other visual media. Digital image has been evolving in the diverse aspects, such as a production of geometrical or organic image compositing, interactive art, multimedia art, or web art, which has been applied a computer as an extended trot of painting. Someone often interprets digitalized copy with endless reproduction of original even as an extension of a print. Visual af is no longer a simple activity of representation by a painter or sculptor, but now is intimately associated with a matter of application of media. There is some problem in images via visual media. First, the image via media doesn't reflect a reality as it is, but reflects an artificial manipulated world, that is, a virtual reality. Second, the introduction of digital effect and the development of image processing technology have enhanced a spectacle of destructive and violent scenes. Third, a child intends to recognize the interactive images of computer game and virtual reality as a reality, or truth. Education needs not only to point out an ill effect of mass media and prevent the younger generation from being damaged by it, but also to offer a knowledge and know-how to cope actively with social, cultural circumstances. Visual media education is one of these essential methods for the contemporary and future human being in the overflowing of image informations. The fosterage of 'Visual Literacy' can be considered as a very purpose of visual media education. This is a way to lead an individual to the discerning, active consumer and producer of visual media in life as far as possible. The elements of 'Visual Literacy' can be divided into a faculty of recognition related to the visual media, a faculty of critical reception, a faculty of appropriate application, a faculty of active work and a faculty of creative modeling, which are promoted at the same time by the education of 'visual literacy'. In conclusion, the education of 'Visual Literacy' guides students to comprehend and discriminate the visual image media carefully, or receive them critically, apply them properly, or produce them creatively and voluntarily. Moreover, it leads to an artistic activity by means of new media. This education can be approached and enhanced by the connection and integration with real life. Visual arts and education of them play an important role in the digital era depended on visual communications via image information. Visual me야a of day functions as an essential element both in daily life and in arts. Students can soundly understand visual phenomena of today by means of visual media, and apply it as an expression tool of life culture as well. A new recognition and valuation visual image and media education is required to cultivate the capability of active, upright dealing with the changes of history of civilization. 1) Visual media education helps to cultivate a sensibility for images, which reacts to and deals with the circumstances. 2) It helps students to comprehend the contemporary arts and culture via new media. 3) It supplies a chance of students' experiencing a visual modeling by means of new media. 4) There are educational opportunities of images with temporality and spaciality, and therefore a discerning person becomes to increase. 5) The modeling activity via new media leads students to be continuously interested in the school and production of plastic arts. 6) It raises the ability of visual communications dealing with image information society. 7) An education of digital image is significant in respect of cultivation of man of talent for the future society of image information as well. To correspond to the changing and developing social, cultural circumstances, and the form and recognition of students' reception of them, visual arts education must arrange the field of studying on a new visual culture. Besides, a program needs to be developed, which is in more systematic and active level in relation to visual media education. Educational contents should be extended to the media for visual images, that is, photography, film, television, video, computer graphic, animation, music video, computer game and multimedia. Every media must be separately approached, because they maintain the modes and peculiarities of their own according to the conveyance form of message. The concrete and systematic method of teaching and the quality of education must be researched and developed, centering around the development of a course of study. Teacher's foundational capability of teaching should be cultivated for the visual media education. In this case, it must be paid attention to the fact that a technological level of media is considered as a secondary. Because school education doesn't intend to train expert and skillful producers, but intends to lay stress on the essential aesthetic one with visual media under the social and cultural context, in respect of a consumer including a man of culture.