• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.4
• /
• pp.326-330
• /
• 2020

Small-scale production control systems for smart manufacturing are becoming increasingly necessary as the manufacturing industry seeks to maximize manufacturing efficiency as the demand for customized product production increases. Correspondingly, the development of an embedded system to realize this capability is becoming important. In this study, we developed an embedded system based on an open source system that is cheaper than a widely applied programmable logic controller (PLC)-based production control system that is easier to install, configure, and process than a conventional relay control panel. This embedded system is system is based on a low-power, high-performance Cortex M4 processor and can be applied to smart manufacturing. It is designed to improve the development environment and compatibility of existing PLCs, control small-scale production systems, and enable data collection through heterogeneous communication. The real-time response characteristics were confirmed through an operation test for input/output control and data collection, and it was confirmed that they can be used in industrial sites.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.300-306
• /
• 2021

Due to the development of IT technology, hardware technologies applied to IoT equipment have recently been developed, so smart systems using low-cost, high-performance RF and computing devices are being developed. However, in the infrastructure environment where a large amount of IoT devices are installed, big data collection causes a load on the collection server due to a bottleneck between the transmitted data. As a result, data transmitted to the data collection server causes packet loss and reduced data throughput. Therefore, there is a need for an efficient big data collection technique in an infrastructure environment where a large amount of IoT devices are installed. Therefore, in this paper, we propose an efficient big data collection technique in an infrastructure environment where a vast amount of IoT devices are installed. As a result of the performance evaluation, the packet loss and data throughput of the proposed technique are completed without loss of the transmitted file. In the future, the system needs to be implemented based on this design.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.8
• /
• pp.528-537
• /
• 2014

Wireless Sensor Network(WSN) is a network which consists of sensor nodes(SNs) in data collection area. It is hard for the SNs to replace battery. Thus energy and transfer efficiency is important because the energy is limited. In this paper, we propose energy-efficient data collection algorithm for wireless sensor networks by using mobile agent in distance-based cluster structure. For avoid collisions and guarantee low latency, make distance-based topology and build cluster by the topology. For performance comparison of the proposed algorithm, compare with existing mobile agent algorithm. When network constructed by 300 nodes, proposed algorithm has performance increase than existing algorithm(GCF, LCF, TBID) in network lifetime 194, 124.6, 1.46 times each and data merging energy efficiency 87.5%, 85%, 45% each.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.189-196
• /
• 2024

Frequent false positives alarm from the Intelligent Selective Control System have raised significant concerns. These persistent issues have led to declines in operational efficiency and market credibility among agents. Developing a new model or replacing the existing one to mitigate false positives alarm entails substantial opportunity costs; hence, improving the quality of the training dataset is pragmatic. However, smaller organizations face challenges with inadequate capabilities in dataset collection and refinement. This paper proposes an automatic human pose data collection system centered around a human pose estimation model, utilizing camera-based sensor fusion techniques and edge devices. The system facilitates the direct collection and real-time processing of field data at the network periphery, distributing the computational load that typically centralizes. Additionally, by directly labeling field data, it aids in constructing new training datasets.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.317-322
• /
• 2019

This study is based on big big data base for real-time collection/analysis/processing of data, creative analysis of data assets, and intelligent processing system based on IoT, which can measure distribution phase in real time. The mobile terminal uses the SDK of the provided device to measure the data information on the consumption of specific seafood production and distribution. We use the oneM2M protocol to store various kinds of information needed for seafood production, and implement a DB Server and a system that allows the administrator to manage the system using the UI.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.275-282
• /
• 2019

Clusters generated by features such as mountains or buildings are considered as the contaminated data that are independent of atmospheric phenomena. The basic way to reduce the clutter signal is to install a clutter fence around the wind profiler. In order to investigate the effect of clutter fence on the wind profiler data, the wind vector collection rate and wind vector accuracy of wind profiler was investigated before and after clutter fence installation. The clutter fence of wind profiler contributed to improve the data quality as well as the data collection rate.

• Journal of Korean Library and Information Science Society
• /
• v.52 no.3
• /
• pp.1-20
• /
• 2021

This study is the most important component in establishing the court library as the best legal library in Korea responsible for professional legal services. A perception survey was conducted on the target. As a result, first, looking at the collection direction based on the needs of general users, in the case of collection types, preference in the order of books, electronic materials, and non-books should be considered. It seems to be necessary to plan a collection development policy reflecting the high preference for books. In addition, in the non-books section, the preference for non-book materials in the form of video rather than audio is much higher, and in the case of language, domestic books should be collected mainly. Second, looking at the collection direction based on the needs of experts, the satisfaction of experts is generally low, so it seems that a collection development policy should be established to improve this. As for the type of information source, preference was shown in the order of electronic materials, books, and non-books. There is a need. The future collection direction should be based on the preference shown in the order of procedural law, specialized field, basic substantive law, and legal series. Also, when collecting the same book, electronic form of legal data should be considered rather than printed. In addition, it is necessary to collect collections mainly from domestic books, and then, it is expected that the scope of collection should be expanded to prioritize English and American books, Japanese books, and German books.

• Tunnel and Underground Space
• /
• v.28 no.6
• /
• pp.547-554
• /
• 2018

Using crowdsourced sensor data collection technique, it is possible to collect high-density ground vibration data which is difficult to obtain by conventional methods. In this study, we have developed a crowdsourced ground vibration data collection system using MEMS sensors mounted on small electronic devices including smartphones, and implemented client and server based on the proposed infrastructure system design. The system is designed to gather vibration data quickly through Android-based smartphones or fixed devices based on Android Things, minimizing the usage of resource like power usage and data transmission traffic of the hardware.

• Journal of Information Management
• /
• v.39 no.2
• /
• pp.131-161
• /
• 2008

Recently electronic journal articles prevail throughout researchers because of the development of internet and electronic publishing technology. It is caused by limited collection development budget, lack of physical storage space for printed journals in libraries, and the user convenience of web services. But from the view of ownership, electronic journals can be unfavorable to information users or libraries who cannot have the permanent right to access all the subscribed journals. Actually the libraries only have right to access journals for subscription periods in using electronic journals. So the users and libraries are willing to purchase printed journals in spite of high cost. As an basis for collaborative collection development and sharing preservation of Korean libraries for the foreign journals, the data analysis is carried out for the journals collection in terms of regional distribution, overlapping status, and journal subject. And the considerables are discussed for collaborative strategic collection development, which means the reduction of overlapped subscription and maximization of utilization in a national standpoint.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.87-92
• /
• 2013

This study is to analyze the impacts of different High-Pass lane speed limits. Paramics, microscopic simulation software, was used to perform microscopic simulations. For the simulations, Incheon toll gate traffic count data was used. The Paramics simulation results show that higher High-Pass speed limit (70Km/h) produced better traffic flow condition and less air pollution cost compared to existing High-Pass speed limit (30Km/h).