• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.468-470
• /
• 2002

We have designed X-ray detection system and multi-channel data acquisition system for Spiral CT application. X-ray detection system consists of scintillator and photodiode. Scintillator converts X-ray into visible light. Photodiode converts visible light into electrical signal. The multi-channel data acquisition system consists of analog, digital, master and backplane board. Analog board detects electrical signal and amplifies signal by 140dB. Digital board consists of MUX(Multiplex) which routes multi-channel analog signal to preamplifier, and ADC(Analog to Digital Converter) which converts analog signal into digital signal. Master board supplies the synchronized clock and transmits the digital data to image reconstructor. Backplane provides electrical power, analog output and clock signal. The system converts the projected X-ray signal over the detector array with large gain, samples the data in each channel sequentially, and the sampled data are transmitted to host computer in a given time frame. To meet the timing limitation, this system is very flexible since it is implemented by FPGA(Field Programmable Gate Array). This system must have a high-speed operation with low noise and high SNR(signal to noise ratio), wide dynamic range to get a high resolution image.

• 한국전자통신학회논문지
• /
• 제7권4호
• /
• pp.849-853
• /
• 2012

본 논문에서는 기타를 처음 접하는 초보자들이 가장 어려워하는 운지법을 쉽게 가르쳐 주기 위해 LED를 기타 플랫보드에 부착하고, 기타에 부착된 LED를 구동하기 위해 ATmega 128과 연동할 수 있는 LED 제어 시스템을 제작하였다. 플랫보드는 ATmega128과 연결되어 Zigbee 통신방법으로 연결하였다. 기타운지법이 프로그램 된 UI를 개발하여 초보자들이 쉽게 코드 및 연주를 배울 수 있는 LED를 이용한 기타운지법에 대한 연구를 수행하였다.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.493-501
• /
• 2013

LED lighting is sensitive because it made by semiconductor. So it has been researched about radiation of heat technologies for a long time. In addition, measurement and assessment a radiation of heat also conducted. It is necessary to get a date of accuracy temperature on the board after LED driven for measuring Junction temperature of the LED Lighting. For this research, we use 5 chip which is 4 W power on top of LED lighting board made by aluminum. Thermal camera effects to emissivity depending on material and property of the surface in LED board because it determines thermal energy which emitted from material surface. it is not only thermal camera has not a standard about emissivity. It has an error of temperature when emissivity was measured by thermal camera. we confirmed that emissivity and reflected temperature depending on color and quality of the surface throughout experiment.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.440-443
• /
• 2004

As a main management unit of MSC, PMU controls the MSC payload operation by issuing commands to other subunit and PMU internal modules. One of these main control functions is to drive the APS(Antenna Pointing System) when APS motion is required. For this purpose, SBC(Single Board Computer) for calculating motor commands and APDE for driving APM(Antenna Pointing Mechanism) by PWM signal operate inside PUM. In this paper, details on APDE design shall be described such as electronic board architecture, primary and redundant design concept, Cross-Strap, FPGA contents and latch-up immune concept, etc., which shall show good practices of electronic board design for space program.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.438-444
• /
• 1993

The circuit board of an electronic equipment were simulated with a vertical channel which had thermal blocks protruded from one of the channel walls. A rought front plate was made of a circuit board attached with short wires to simulate the back side of a printed circuit board. Natural convection experiments were carried out to study the effects of channel space and rough front plate and to find the suitable characteristic value after the fourth row. The effect of a rough front plate was negligble. There were negligible effects of the channel space on the first and second heaters. Heat transfer coefficients after the third row decreased as the channel space decreased. Heat transfer coefficients were almost constant for larger than 20 mm channel space. A characteristic length was suggested to non-dimensionalize Nu and Ra numbers in a vertical channel with protruded heaters. A correlation was obtained using the new characteristic lengths.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.882-885
• /
• 2018

시스템의 동작 속도가 빨라짐에 따라 인쇄 회로 기판(PCB: printed circuit board)에서 신호 무결성 문제가 매우 중요해지고 있다. 지금까지는 관습적으로 PCB 면적을 줄이고 가격을 낮추도록 설계하는데 치중해왔다. 그러나 초고속으로 동작하는 PCB에서는 유전체 특성, 배선 폭, 배선 간격, 임피던스 정합 등을 고려하여 정밀하고 세심하게 설계하지 않으면 제대로 동작하기 어렵다. 본 논문에서는 초고속 PCB에서 생기는 여러 가지 문제점과 이를 완화할 수 있는 다양한 설계 기법에 대해 살펴본다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.255-257
• /
• 2006

This paper proposed a platform which includes both Network processor and DSP for flexible IED. The Network processor is one of the Intel's IXP4XX Product Line family and the DSP is one of the TI's C6000 family. An embedded Linux is ported in Network processor so that a DSP program can be downloaded to Network processor through ethernet and then downloaded to DSP. Using this method, various algorithms according to IED can be applied to the Network processor board. Maximum ten ADCs can be connected because there is a CPLD between DSP and ADC. That is, the network processor board which can measure maximum 40 channels is implemented. In DSP program, thread and double buffering methods are used not to miss voltage samples. The Network processor board is verified using a method that eight channel voltage signals converted to digital are transmitted to server through both DSP and IXP425.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.183-185
• /
• 2002

This paper proposes the test method for the testing of a RLC parallel circuit on the electronic circuit board. This method utilizes a guarding circuit and a phase detection circuit. The guarding circuit separates electrically the tested device or circuit from printed circuit board. Phase detector estimates the phase difference from two signals, voltage and current. This method computes R. L and C value from phase difference($\theta$) and impedance value(Z) obtained by enforcing two other frequence stimulus under the guarding state.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 추계학술대회
• /
• pp.79-82
• /
• 1991

Digital FHR monitoring system based on the personal computer combined wi th the digital signal processing (DSP) board was implemented. The DSP board acquires and digitally processes ultrasound fetal Doppler signal for digital rectification, envelope detection, autocorrealtion function calculation and its peak position detection. The personal computer interfaced with the DSP board is in charge of graphic display, hardcopy, data taransmission and on-line analysis of fetal heart rate change including on-line warning system, base-line estmation, acceleration, deceleration and variability. The advantages of PC-DSP based system can be summarized as follows: 1) Minimum hardware realization. 2) Increased flexibility. 3) Total care system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1269-1271
• /
• 2009

We had proposed fast thermal stress estimation methodology for the components on system board when the system is stationary within specific ambient air temperature. Now, we will propose one efficient thermal stress estimation methodology, block adaptive filtering methodology, for the FPD electronic system board which is enclosed by mechanical cover.