• 한국압력기기공학회 논문집
• /
• 제19권2호
• /
• pp.84-92
• /
• 2023

As temporary storage facilities for spent nuclear fuels in domestic nuclear power plants are expected to be saturated, external intermediate storage facilities would be required in the future. Spent nuclear fuels are stored in metal canisters and then placed in a dry environment within concrete or metal casing for operation. In the United States, the dry storage method for spent nuclear fuels has been operated for an extended period. Based on the corrosion experiences of dry storage canisters in chloride environments, numerous studies have been conducted to reduce corrosion in welds. With the construction of intermediate storage facilities in Korea for spent nuclear fuels expected near coastal areas adjacent to nuclear power plants, there is a need for research on the corrosion occurrence of welds and mitigation methods for canisters in chloride environments. In this paper, we measured and compared the residual stresses in the Heat-Affected Zones (HAZ) after electron beam welding (EBW) and gas tungsten arc welding (GTAW) processes for candidate materials such as 304L, 316L, and duplex stainless steel(DSS). We investigated the possibility of microstructure control through the application of surface modification processes using friction stir processing (FSP). Corrosion tests on each welded specimen revealed a higher corrosion rate in EBW welds compared to GTAW. Furthermore, it was confirmed that corrosion resistance improved due to phase refinement and redistribution of precipitates when FSP was applied.

• Journal of Welding and Joining
• /
• 제32권2호
• /
• pp.14-17
• /
• 2014

Ferritic stainless steels are widely used in the construction industry and in exhaust manifolds due to their low cost and relatively superior stress corrosion cracking resistance and pitting corrosion resistance compared to austenite stainless steels. Ferritic stainless steels are currently welded by various welding process including gas tungsten arc welding (GTAW), electron resistance welding (ERW) and laser beam welding. However, when these stainless steels are welded by fusion welding, some problems occur in the fusion zone (FZ) and heat affected zone (HAZ). First, the ductility of the weld is reduced due to the grain growth in the FZ and HAZ. Second, as its HAZ is frequently sensitized during welding, corrosion resistance deteriorates in this region due to the Cr depletion zone. To prevent these problems, it is recommended that ferritic stainless steels be welded with a low heat input. In this study, recent researches in the view of friction stir welded ferritic stainless steels are briefly reviewed.

• Journal of Welding and Joining
• /
• 제18권1호
• /
• pp.97-103
• /
• 2000

Time series analysis results show the SVD is a candidate of on-line monitoring of welding penetration when the covariance matrix of a full penetration is used as a mapping function. As the reconstructed embedding vectors from the chaotic scalar time series are manipulated by the covariance matrix, the mapped tim series lie on a hyper-ellipsoid which the lengths of semi-axes are the squared eigenvalues of the covariance matrix in the case of full penetration. These visualize by two dimensional stroboscope views. The other cases like partial penetration, are different in the sense of sizes and shapes. Here we test two types of time series; the ion current and the X-ray. The ion current is better than the X-ray as an on-line monitoring signal, because the difference of the eigenvalue spectrum of the ion(between the pull penetration and partial penetration) is bigger than those of the X-ray.

• Journal of Welding and Joining
• /
• 제5권2호
• /
• pp.53-59
• /
• 1987

The effect of applied stress, current density and heat-treatment after welding on the time to fracture, fracture behavior was investigated by the method of constant load tensile testing under catholic charging with hydrogen in E.B. welded 250,300 Grade 18% Ni Maraging steel sheet. The main results obtained are as follows: 1. All specimen showed the characteristic delayed failure and the time to fracture showed decreasing tendency with the increase in current density and applied stress. 2. Hydrogen embitterment susceptibility of notched specimen after solution-treatment and aging after welding was more increased than that of aged smooth specimen and as welded specimen. 3. Fracture surface showed a typical intergranular fracture on the border, a dimple pattern in the center of specimen and some quasi-cleavage fracture between the intergranular and the dimple.

• Journal of Welding and Joining
• /
• 제34권4호
• /
• pp.1-8
• /
• 2016

Metal AM(Additive Manufacturing) has been steadily developed and that is classified into two method. PBF(Powder Bed Fusion) deposited in the bed by the laser or electron beam as a heat source of the powder material and DED(Directed Energy Deposition) deposited by varied heat source of powder and solid filler material. In the developed countries has been applying high productivity process of solid filler metal based DED method to the aerospace and defense sectors. The price of the powder material is quite expensive compared to the solid filler metal. A study on DED method that is based on a solid filler metal is increasing significantly although was low accuracy and degree of freedom.

• 한국광학회지
• /
• 제17권4호
• /
• pp.354-358
• /
• 2006

적층으로 구성되는 초소형 전자렌즈의 실리콘 렌즈와 절연체인 파이렉스는 접합과 정렬을 동시에 수행하여야 한다. 이를 위한 방법으로 회절을 이용한 정렬과 레이저 접합을 이용하였으며, source 렌즈와 Einzel 렌즈의 정렬오차는 가장 큰 개구를 기준으로 최대 $\pm$4% 이내에서 이루어졌다. 정렬 조건과 레이저 접합 조건을 제시하였으며, 접합을 견고히 하기 위한 양극 접합 방식을 기술하였다. 전류영상화를 통해 선폭이 9 $\mu$m인 Cu grid를 시험한 결과 완성된 전자렌즈는 감속모드보다 가속모드에서 분해능이 좋았으며, 작은 개구를 가진 렌즈의 정밀한 정렬과 조합으로 높은 분해능을 믿을 수 있었다.

• 한국레이저가공학회지
• /
• 제11권2호
• /
• pp.15-19
• /
• 2008

Electron beam (EB) weldability of pure grade Nb sheet was studied. One of Nb sheets was as-annealed and the other was cold rolled. Microstructures, Vickers hardness, and transverse weld tensile test were carried out for the base metal, the heat affected zone (HAZ) and weld metal. In the case of the EB welds made using the annealed Nb sheeet, fine equiaxed grains and coarse grains were dominant at the base metal and the HAZ, respectively, and columnar grains were observed at the weld metal. For the EB welds made using the cold rolled Nb sheet, elongated grains in the rolling direction at the base metal, and the microstructures of the weld metal and the HAZ are similar to those of the EB welds made using the annealed Nb sheet, respectively. For both annealed and cold rolled Nb sheet, the width of the HAZs are unusually wide in spite of using high density heat source, i.e. electron beam, and the grain sizes of both HAZs are similar. When tensile test was carried out using the transverse weld specimens, the failure occurred at the HAZ for both EB welds made using Nb sheets annealed and cold rolled, respectively and the tensile strengths of both specimens were 161MPa. Vickers hardness of EB welds made using annealed Nb was 56-57 Hv at both base metal and weld metal, 52-53 Hv at the HAZ. On the other hand, Vickers hardness of EB welds made using cold rolled Nb was 97-99 Hv at the base metal, but the hardness values of weld metal were similar to those obtained at the weld metal of annealed Nb.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2009년 추계학술발표대회
• /
• pp.114-114
• /
• 2009

최근 국내외에서 자동차 연비와 성능 향상을 위하여 고부가가치 자동변속기의 개발이 적극적으로 추진되고 있다. 특히, 유럽(ZF)과 일본(JATCO, AISIN)을 비롯한 변속기 부품의 기술선진국에서는 전자빔 용접을 적용한 고부가가치 자동변속기 제품이 개발되어 다양한 고급차 모델에 적용되고 있으며 2010년까지 8속 자동변속기를 출시할 예정으로 개발을 추진하고 있다. 이러한 자동변속기를 개발하기 위하여 부품의 성형 및 가공정밀도 관리가 중요하며, 최종 조립되는 부품의 전처리(연질화처리, 탈지, 이물질 제거등)와 용접시 용접변형을 최소화하기 위한 공정조건의 엄격한 관리가 요구되고 있다. 변속기 부품으로 사용되는 소재는 성형성 확보를 위한 연질재(SPCC)와 강도를 확보하기 위한 고강도강(SAPH400, SPFH590)으로 서로 다른 두께의 재질이 조립되어 최종단계에서 용접공정에 의해 제작되고 있다. 특히, 연질재는 복잡한 형상으로 성형한 다음, 가공을 거쳐 경화를 위한 연질화처리가 요구되기 때문에 건전한 용접을 하기 위해서는 용접면에 접한 연질화 처리부는 연질화 처리재가 잔존하지 않도록 완전한 제거할 필요가 있다. 만약 전처리 공정에서 충분한 세척과 가공품의 정도관리가 확보되지 않으면 전자빔 용접시 고온에서 이물질 증발과 잔류, 스패터 발생등에 의한 용접부 결함발생이나 용접변형으로 인하여 제품불량이 발생하게 된다. 따라서 본 연구에서는 최종 조립공정인 용접작업시 발생되는 결함을 방지하고 이 두께 및 이종소재의 전자빔 용접비드 형상(비드 폭, 용입깊이)을 최적화 함으로서 용접부 변형을 최소화하고 충분한 강도를 확보하고자 전자빔 용접전류와 속도에 따른 비드형상을 비교검토 하고자 하였다. 그리고 실차적용시 신뢰성을 확보하기 위하여 전자빔 용접한 자동차 변속기 부품의 비틀림 시험을 실시하였으며 전자빔 용접 전, 후의 변형량을 측정하여 변속기 부품으로서의 적용성을 검증하고자 하였다.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.776-783
• /
• 2019

Laser welding is usually a more effective method than electron-beam one since a vacuum chamber is not required. It is important for joining Zr-1%Nb (E110) alloy in a manufacturing process of nuclear fuel rods. In the present work, effect of energy parameters of pulsed laser welding on properties of butt joints of sheets with a thickness of 0.5 mm is investigated. The most efficient combination has been found (8-11 J pulse energy, 10-14 ms pulse duration, 780-810 W peak pulse power, 3 Hz pulse frequency, 1.12 mm/s welding speed). The results show that ultimate strength under static loading can not be used as a quality criterion for zirconium alloys welds. Increased shielding gas flow rate does not allow to protect weld metal totally and contributes to defect formation without using special nozzles. Several types of imperfections of the welds have been found, but the major problem is branching microcracks on the surface of the welds. It is difficult to identify the cause of their appearance without additional research on improving the welding zone protection (gas composition and flow rate as well as nozzle configuration) and studying the hydrogen content in the welds.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권8호
• /
• pp.1076-1082
• /
• 2012

오늘날 LNG선의 용접에는 아크와 플라즈마가 사용되고 있으나 아크용접은 에너지 밀도가 낮아 후판에 대해서 다층용접이 불가피하며, 고밀도 열원인 레이저 용접에 비하여 용접속도에도 한계가 있다. 따라서 후판 용접시 다층용접에 의한 용접부의 조직적 결함이나 과대 입열로 형성된 열영향부 등의 문제를 해소하기 위하여 키홀용접에 의한 원패스 용접이 고려되고 있다. 키홀용접이 가능한 열원은 레이저, 전자빔, 플라즈마가 있으며, 현재 플라즈마 용접이 아크를 대체하여 LNG선 카고탱크의 멤브레인 용접에 적용되고 있다. 최근에는 멤브레인의 용접에 레이저를 적용하기 위한 많은 연구가 진행 중에 있다. 본 연구에서는 LNG선용 스테인리스강에 대한 파이버 레이저 및 플라즈마 아크 용접의 용접성, 기계적 성질 및 미세조직을 비교하였다. 그 결과 레이저 용접이 더 빠른 용접속도에서 좁은 용접부와 열영향부를 얻을 수 있었다. 따라서 LNG선의 용접에서는 파이버 레이저가 보다 우수한 용접법이라는 것을 알 수 있었다.