Acknowledgement
본 연구는 한국연구재단이 주관하는 원자력기초연구지원사업의 건식저장용기 CISCC 저항성 향상을 위한 통합혁신기술 개발과제의 일환으로 수행되었습니다.
References
- Nuclear Policy Center of Seoul National University, https://atomic.snu.ac.kr/index.php
- Baeg, C. Y., Cho, C. H., 2018, "Development Status for Commercialization of Spent Nuclear Fuel Transportation and Dry Storage System Technology", JNFCWT, Vol. 16, No. 2, pp. 271-279, doi:https://doi.org/10.7733/jnfcwt.2018.16.2.271
- Shin, J. C., Yang, J. D., Sung, U. H., Ryu, S. W., Park, Y. W., 2020, "Technology Trends in Spent Nuclear Fuel Cask and Dry Storage", Trans. of the KPVP, Vol. 16, No. 1, pp. 110-116, doi:http://dx.doi.org/10.20466/KPVP.2020.16.1.110
- USNRC, 2014, "Assessment of Stress Corrosion Cracking Susceptibility for Austenitic Stainless Steels Exposed to Atmospheric Chloride and Non-Chloride Salts", U.S. Nuclear Regulatory Commission, Washington, DC, NUREG/CR-7170.
- USNRC, 2010, "Atmospheric Stress Corrosion Cracking Susceptibility of Welded and Unwelded 304, 304L, and 316L Austenitic Stainless Steels Commonly Used for Dry Cask Storage Containers Exposed to Marine Environments", U.S. Nuclear Regulatory Commission, Washington, DC, NUREG/CR-7030
- USNWTRB, 2017, "Chloride-Induced Stress Corrosion Cracking Potential In Dry-storage Canisters for Spent Nuclear Fuel Rev. 1A", U.S. Nuclear Waste Technical Review Board, Arlington, VA
- EPRI, 2006, "Effects of Marine Environments on Stress Corrosion Cracking of Austenitic Stainless Steels", Electric Power Research Institute, Palo Alto, CA, EPRI-1011820
- Ramesh, A., Kumar, V., Anuj, and Khanna, P., 2021, "Weldability of duplex stainless steels- A review", ICMED 2021, Hyderabad, Sep. 24-26, doi:https://doi.org/10.1051/e3sconf/202130901076
- Rezaei-Nejad, S. S., Abdollah-zadeh, A., Hajian, M., Kargar, G., Seraj, R., 2015, "Formation of Nanostructure in AISI 316L Austenitic Stainless Steel by Friction Stir Processing", Procedia Materials Science 11, pp. 397-402, doi:https://doi:10.1016/j.mspro.2015.11.008
- Chen, Y. C., Fujii, H., Tsumura, T., Kitagawa, Y., Nakata, K., Ikeuchi, K., Matsubayashi, K., Michishita, Y., Fujiya, Y., Katoh, J., 2012, "Banded structure and its distribution in friction stir processing of 316L austenitic stainless steel", J NUCL MATER, 420, pp. 497-500, doi: https://doi.org/10.1016/j.jnucmat.2011.10.053
- Seo, G. J., 2014, Effect of σ-phase on corrosion resistance of super duplex stainless steel weld metal, Department of Metallurgical Engineering, Graduate School of Pukyong National University, master's thesis.
- Cao, F., Jiang, T., Hou, W., Huang, G., Shen, Y., Ding, Y., Shu, P., 2022, "Effect of inhomogeneous fiber structure on the mechanical properties of friction stir welded SAF 2507 super duplex stainless steel", Mater Chem Phys. 283 126026, doi:https://doi.org/10.1016/j.matchemphys.2022.126026
- Kim, S., Kim, G., Oh, C., Song, S., 2022, "Pitting and Localized Galvanic Corrosion Characteristics of Gas Tungsten Arc Welded Austenitic Stainless Steel" MET MATER INT, Vol. 28, No. 10, pp. 2448-2461, doi:https://doi.org/10.1007/s12540-021-01149-6
- Sutton, B., Ross, K., Grant, G., Cannell, G., Frederick, G., Couch, R., "Friction Stir Processing of Degraded Austenitic Stainless Steel Nuclear Fuel Dry Cask Storage System Canisters", Energy Materials 2017, pp. 343-351, doi:https://doi.org/10.1007/978-3-319-52333-0_31