Browse > Article
http://dx.doi.org/10.5781/JWJ.2016.34.4.1

Trend of Metal 3D Printing by Welding  

Byun, Jae-Gyu (Dept. of Materials System Engineering, Graduate School, Pukyong National University)
Cho, Sang-Myung (Dept. of Materials System Engineering, Pukyong National University)
Publication Information
Journal of Welding and Joining / v.34, no.4, 2016 , pp. 1-8 More about this Journal
Abstract
Metal AM(Additive Manufacturing) has been steadily developed and that is classified into two method. PBF(Powder Bed Fusion) deposited in the bed by the laser or electron beam as a heat source of the powder material and DED(Directed Energy Deposition) deposited by varied heat source of powder and solid filler material. In the developed countries has been applying high productivity process of solid filler metal based DED method to the aerospace and defense sectors. The price of the powder material is quite expensive compared to the solid filler metal. A study on DED method that is based on a solid filler metal is increasing significantly although was low accuracy and degree of freedom.
Keywords
Metal 3D printing; Additive manufacturing; Welding;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 ASTM, F2792-12a, Standard Terminology for Additive Manufacturing Technologies
2 Terner, Mathieu. "The Current State, Outcome and Vision of Additive Manufacturing." Journal of Welding and Joining (Vol. 33, No. 6) (2015), 12   DOI
3 Ding, Donghong, et al., Wire-feed additive manufacturing of metal components, technologies, developments and future interests. The International Journal of Advanced Manufacturing Technology 81.1-4 (2015), 465- 481   DOI
4 Craeghs, Tom, et al., Online quality control of selective laser melting. Proceedings of the Solid Freeform Fabrication Symposium, Austin, TX. (2011)
5 Berumen, Sebastian, et al., Quality control of laser-and powder bed-based Additive Manufacturing (AM) technologies. Physics procedia, 5(2010), 617-622   DOI
6 Gharbi, Myriam, et al., Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti-6Al-4V alloy. Journal of Materials Processing Technology 213(5) (2013), 791-800   DOI
7 Kim, Woosung, et al. "Effects and Application Cases of Injection Molds by using DED type Additive Manufacturing Process." Journal of Welding and Joining 32.4 (2014), 348-352
8 Watson, J. K., et al., Development of a prototype low-voltage electron beam freeform fabrication system. (2002)
9 Taminger, Karen, and Robert A. Hafley, Electron beam freeform fabrication, a rapid metal deposition process, (2003)
10 Taminger, Karen M., and Robert A. Hafley, Electron beam freeform fabrication for cost effective near-net shape manufacturing, (2006)
11 Stecker, S., et al., Advanced Electron Beam Free Form Fabrication Methods & Technology, Session 2 (2006), 12
12 Seufzer, W. J., and K. M. Taminger, Control methods for the electron beam free form fabrication process, NATIONAL AERONAUTICS AND SPACE ADMIN LANGLEY RESEARCH CENTER HAMPTON VA, (2007)
13 Mitzner, Scott, et al., Grain refinement of freeform fabricated Ti-6Al-4V alloy using beam/arc modulation, (2012)
14 Fox, Jason, and Jack Beuth, Process mapping of transient melt pool response in wire feed E-beam additive manufacturing of Ti-6Al-4V, Solid Freeform Fabrication Symposium, Austin, TX, (2013)
15 Gockel, Joy, Jack Beuth, and Karen Taminger, Integrated control of solidification microstructure and melt pool dimensions in electron beam wire feed additive manufacturing of Ti-6Al-4V, Additive Manufacturing, 1 (2014), 119-126
16 Dickens, P. M., et al., Rapid prototyping using 3-D welding, Proc. Solid Freeform Fabrication Symp, (1992)
17 Everton, Sarah K., et al., Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing, Materials & Design, (2016)
18 Zhang, Yu Ming, et al., Automated system for welding-based rapid prototyping, Mechatronics 12(1) (2002), 37-53   DOI
19 Zhang, YuMing, et al., Weld deposition-based rapid prototyping, a preliminary study, Journal of Materials Processing Technology 135(2) (2003), 347-357   DOI
20 Almeida, P. S., and S. Williams, Innovative process model of Ti-6Al-4V additive layer manufacturing using cold metal transfer (CMT), Proceedings of the Twenty-first Annual International Solid Freeform Fabrication Symposium, University of Texas at Austin, Austin, TX, USA. (2010)
21 Ding, J., et al., Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts, Computational Materials Science 50(12) (2011), 3315-3322   DOI
22 Martina, F., et al., Investigation of the benefits of plasma deposition for the additive layer manufacture of Ti- 6Al-4V, Journal of Materials Processing Technology 212(6) (2012), 1377-1386   DOI
23 Zhai, Yun, Early cost estimation for additive manufacture, (2012)
24 Adebayo, Adeyinka, Characterisation of integrated WAAM and machining processes, (2013)
25 Bandari, Yashwanth K., et al., ADDITIVE MANUFACTURE OF LARGE STRUCTURES, ROBOTIC OR CNC SYSTEMS?
26 Karunakaran, K. P., A. Sreenathbabu, and Vishal Pushpa, Hybrid layered manufacturing, direct rapid metal tool-making process, Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture 218(12) (2004), 1657-1665   DOI
27 Akula, Sreenathbabu, and K. P. Karunakaran, Hybrid adaptive layer manufacturing, An Intelligent art of direct metal rapid tooling process, Robotics and Computer-I ntegrated Manufacturing, 22(2) (2006), 113-123   DOI
28 Suryakumar, S., et al., Weld bead modeling and process optimization in hybrid layered manufacturing, Computer-Aided Design, 43(4) (2011), 331-344   DOI
29 Xiong, Jun, et al., Vision-sensing and bead width control of a single-bead multi-layer part, material and energy savings in GMAW-based rapid manufacturing, Journal of Cleaner Production, 41 (2013), 82-88   DOI
30 Zhao, Huihui, et al., Three-dimensional finite element analysis of thermal stress in single-pass multi-layer weld-based rapid prototyping, Journal of Materials Processing Technology, 212(1) (2012), 276-285   DOI
31 Xiong, Jun, et al., Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing, Robotics and Computer-Integrated Manufacturing, 29(2) (2013), 417- 423   DOI
32 Xiong, Jun, et al., Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing, Robotics and Computer-Integrated Manufacturing, 29(2) (2013), 417-423   DOI
33 Xiong, Jun, et al., Bead geometry prediction for robotic GMAW-based rapid manufacturing through a neural network and a second-order regression analysis, Journal of Intelligent Manufacturing, 25(1) (2014), 157-163   DOI
34 Aiyiti, Wurikaixi, et al., Investigation of the overlapping parameters of MPAW-based rapid prototyping, Rapid Prototyping Journal, 12(3) (2006), 165-172   DOI
35 Lin, J. J., et al., Microstructural evolution and mechanical properties of Ti-6Al-4V wall deposited by pulsed plasma arc additive manufacturing, Materials & Design, 102 (2016), 30-40   DOI
36 Katou, M., et al., Freeform fabrication of titanium metal and intermetallic alloys by three-dimensional micro welding, Materials & design, 28(7) (2007), 2093-2098   DOI
37 Brandl, Erhard, et al., Mechanical properties of additive manufactured titanium (Ti-6Al-4V) blocks deposited by a solid-state laser and wire, Materials & Design, 32(10) (2011), 4665-4675   DOI
38 Horii, Toshihide, Soshu Kirihara, and Yoshinari Miyamoto, Freeform fabrication of Ti-Al alloys by 3D micro-welding, Intermetallics, 16(11) (2008), 1245-1249   DOI
39 Horii, Toshihide, Soshu Kirihara, and Yoshinari Miyamoto, Freeform fabrication of superalloy objects by 3D micro welding, Materials & Design, 30(4) (2009), 1093-1097   DOI
40 Keizo, TANAKA, et al., Strength of manufacturing object made by direct metal lamination using arc discharge, The japan society of mechanical engineers, 79(800) (2013), 1168-1178   DOI
41 Brandl, Erhard, et al., Deposition of Ti-6Al-4V using laser and wire, part I, Microstructural properties of single beads, Surface and Coatings Technology, 206(6) (2011), 1120-1129   DOI
42 Brandl, E., et al., Additive manufactured Ti-6Al-4V using welding wire, comparison of laser and arc beam deposition and evaluation with respect to aerospace material specifications, Physics Procedia, 5 (2010), 595-606   DOI
43 Levy, Gideon N., Ralf Schindel, and Jean-Pierre Kruth, Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives, CIRP Annals-Manufacturing Technology, 52(2) (2003), 589-609   DOI
44 Baufeld, Bernd, Erhard Brandl, and Omer Van der Biest, Wire based additive layer manufacturing, comparison of microstructure and mechanical properties of Ti-6Al-4V components fabricated by laser-beam deposition and shaped metal deposition, Journal of Materials Processing Technology, 211(6) (2011), 1146-1158   DOI
45 Ma, Yan, et al., Effect of interpass temperature on in-situ alloying and additive manufacturing of titanium aluminides using gas tungsten arc welding, Additive Manufacturing, 8 (2015), 71-77   DOI
46 Baufeld, Bernd, and Omer Van der Biest, Mechanical properties of Ti-6Al-4V specimens produced by shaped metal deposition, Science and technology of advanced materials, (2016)
47 Ding, Donghong, et al., A multi-bead overlapping model for robotic wire and arc additive manufacturing (WAAM), Robotics and Computer-Integrated Manufacturing, 31 (2015), 101-110   DOI
48 Ma, Yan, et al., The effect of location on the microstructure and mechanical properties of titanium aluminides produced by additive layer manufacturing using in-situ alloying and gas tungsten arc welding, Materials Science and Engineering, A 631 (2015), 230-240   DOI
49 Ding, Donghong, et al, Wire-feed additive manufacturing of metal components, technologies, developments and future interests, The International Journal of Advanced Manufacturing Technology, 81(1-4) (2015), 465-481   DOI
50 Ding, Donghong, et al., Towards an automated robotic arc-welding-based additive manufacturing system from CAD to finished part, Computer-Aided Design, (2016)
51 Ding, Donghong, et al., Bead modelling and implementation of adaptive MAT path in wire and arc additive manufacturing, Robotics and Computer-Integrated Manufacturing, 39 (2016), 32-42   DOI
52 Song, Yong-Ak, et al., 3D welding and milling, Part I-a direct approach for freeform fabrication of metallic prototypes, International Journal of Machine Tools and Manufacture, 45(9) (2005), 1057-1062   DOI
53 Sang-Myung Cho, et al., Filler metal shpae for TIG welding, Korea patent, 1016216960000 (2016)
54 Song, Yong-Ak, Sehyung Park, and Soo-Won Chae, 3D welding and milling, part II-optimization of the 3D welding process using an experimental design approach, International Journal of Machine Tools and Manufacture, 45(9) (2005), 1063-1069.   DOI
55 Sang-Myung Cho, et al., Filler metal shpae for welding, Korea patent, 1016440190000 (2015)
56 Sang-Myung Cho, et al., Filler metal shpae for welding, Korea patent, 1016273680000 (2016)
57 Jun, Jae-Ho, Sung-Ryul Kim, and Sang-Myung Cho, A Study on Productivity Improvement in Narrow Gap TIG Welding, J. of Welding and Joining, 34(1) (2016), 68-74 (in Korean)   DOI
58 Jae-Gyu Byun, Jae-Ho Jun, Song-Yi Park, Sang-Jun Lee, Dong-Soo Oh, Sang-Myun Cho, Study of Mechanical Property of Metal 3D Printing by Super-TIG Welding, Abstracts of KWJS, 62(2015), 86 (in Korean)
59 Jae-Gyu Byun, Jae-Ho Jun, Sang-Jun Lee, Dong-Soo Oh, Sang-Myung Cho, Development of The Process to Improve Degree of Freedom in STS316L Metal 3D Printing by Super-TIG Welding, Abstracts KWJS, 63 (2015), 62 (in Korean)
60 Sang-Jun Lee, Jae-Gyu Byun, Sang-Myung Cho, Development of Additive Process on Cylindrical Parts by Super-TIG Metal 3D Printing, Abstracts o the KWJS, 64 (2016), 141 (in Korean)
61 Jae-Gyu Byun, Sang-Jun Lee, Yung-Gyu Lee, Soo-Yoong Park, Young-Tae Cho, Sang-Myung Cho, Development of The Metal 3D Printing Equipment by Super-TIG Welding, Abstracts of KWJS, 64(2016), 148