• Journal of the Korean Ceramic Society
• /
• v.41 no.2
• /
• pp.102-105
• /
• 2004

ZnO-In$_2$O$_3$ films were fabricated on Corning 1737 glass substrate by an electron beam evaporation technique and their characteristics were investigated. The composition of ZnO-In$_2$O$_3$ films had a marked effect on the electrical properties of the films. The ZnO-In$_2$O$_3$ films showed superior transparent-conducting characteristics with increase of Zn content. The resistivity and carrier concentration of the film having Zn content of 45 at% are 4.45${\times}$10$^{-3}$ cm and 3.1${\times}$10$^{19}$ cm$^{-3}$ , respectively. Also, the transmittance was higher than 80% throughout the visible range. The average roughness of the film was 14.6 $\AA$ in terms of root mean square.

• ETRI Journal
• /
• v.22 no.3
• /
• pp.19-26
• /
• 2000

We describe a detailed numerical scheme to calculate electron transport in quantum wires using the Green function formalism combined with tight-binding orbital basis. As an example of the application, we study the electron transport in a Si nanowire containing a finite potential barrier. The effects of nonzero bias, temperature, and disorder on the barrier-induced oscillatory conductance are investigated within the context of coherent transport model. The oscillatory behavior of the conductance as a function of the Fermi energy is found to be highly sensitive to sample disorder and limited to a very low temperature and a small bias range.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.7
• /
• pp.79-87
• /
• 1998

Nitrided oxides which have been investigated as alternative gate oxide for metal-oxide-semiconductor field effect devices were grown by two-step process using N$_{2}$O gas, and were chaacterized via a fowler-nordheim tunneling(FNT) electron injection technique. Electrical characteristics of nitrided gate oxides were superior to that of control oxides.Further, the FNT electron injection into the nitrided gate oxides reveals that gate oxides degrade more both if electrons were foreced to inject from the gate metal and if thicker nitrided gate oxides were used in the thickness range of 90~130.angs.. Models are suggested to explain these phenomena.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3453-3458
• /
• 2014

An efficient and practical synthesis of natural moracins, which have diverse range of biological properties including anticancer, antioxidant, and antibacterial activities, has been achieved using $Pd(OAc)_2/P(^tBu)_3-HBF_4$ as a Sonogashira coupling reagent which solved the unreactive problems in case of higher electron density of haloaryl compounds in the reaction. Lowering electron density of halophenol with acetylation and changing Sonogashira coupling reagent from $PdCl_2(PPh_3)_2$ to $Pd(OAc)_2/P(^tBu)_3-HBF_4$ smoothly produce the benzofuran structures in the syntheses of moracins M, N and S. The electron deficient halobenzaldehyde, however, easily forms the benzofuran using original Sonogashira conditions, and utilized for the first synthesis of moracin Y.

• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.795-798
• /
• 2016

Transmission X-ray tubes based on carbon nanotube have attracted significant attention recently. In most of these tubes, tungsten is used as the target material. In this article, the well-known simulator Geant4 was used to obtain some of the tungsten target parameters. The optimal thickness for maximum production of usable X-rays when the target is exposed to electron beams of different energies was obtained. The linear variation of optimal thickness of the target for different electron energies was also obtained. The data obtained in this study can be used to design X-ray tubes. A beryllium window was considered for the X-ray tube. The X-ray energy spectra at the moment of production and after passing through the target and window for different electron energies in the 30-110 keV range were also obtained. The results obtained show that with a specific thickness, the target material itself can act as filter, which enables generation of X-rays with a limited energy.

• Journal of Welding and Joining
• /
• v.21 no.6
• /
• pp.33-39
• /
• 2003

Wavelet transform analysis results show a spectrum energy distribution of CWT along scale factors distinguish the partial, full and over penetration in a electron beam welding by analyzing the curve of spectrum energy at small scale, middle and large scale range, respectively. Two types of signals collected by Ion collector and x-ray sensors and analyzed. The acquired signals from sensors are very complicated since these signals are very closely related the dynamics of keyhole which interact the very high density energy with materials during welding. The results show the wavelet transform is more effective to diagnosis than Fourier Transform, further for the general welding defects which are not a periodic based, but a transient, non-stationary and time-varying phenomena.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.528-528
• /
• 2012

Recently, atmospheric pressure plasmas attract lots of interests for the useful applications such as surface modification and bio-medical treatment. In this study, a particle-in-cell Monte Carlo collision (PIC-MCC) simulation was adopted to investigate the discharge characteristics of a planar micro dielectric barrier discharge (DBD) with a driving frequency from 13.56 MHz to 162.72 MHz and with a gap distance of 80 micrometers. The variation of frequency, in the change in the electron energy probability function (EEPF). Through the relation between the ion trajectories and the frequency, results in the change of EEPFs is achievable with the turning point of frequency mode. Therefore, it is possible to categorize the efficient operation range of DBDs for its applications by controlling the interactions between plasmas and neutral gas for the generation of preferable radicals.

• Applied Microscopy
• /
• v.27 no.4
• /
• pp.473-481
• /
• 1997

Disorder-order transformation of nanocrystalline FeAl have been investigated by a combination of electron and X-ray diffraction analysis including high resolution electron microscopy and differential scanning calorimetry. Fe-50at.%Al powders mechanically alloyed for 90 hours consist of $5\sim10$ nm size grains haying either disordered b.c.c. structure or amorphous structure. X-ray and electron diffraction of mechanically alloyed FeAl powders show that disorder-order transformation occurs at the temperature range of $300^{\circ}C\sim320^{\circ}C$. Such a low-temperature ordering behavior exhibiting an exothermic reaction is attributable to the nm-scale grain structure with a large amount of defects accumulated during mechanical alloying process.

• Proceedings of the KIEE Conference
• /
• 2005.10a
• /
• pp.89-92
• /
• 2005

Using quantitative simulations of weakly ionized plasma, we can analyze gas characteristic. In this paper, the electron transport characteristic in $CH_4$ has been analysed over the E/N range 0.1${\sim}$ 300(Td), at the 300($_{\circ}$ K) by the two term approximation Boltzmann equation method and Monte Carlo Simulation. The electron energy distribution function has been analysed in $CH_4$ at E/N=10, 100 for a case of the equilibrium region in the mean energy. The result of Boltzmann equation and Monte Carlo Simulation has been compared with experimental data by Ohmori, $Lucas^{[18]}$ and Carter. The swarm parameter from the swarm study are expected to sever as a critical test of current theories of low energy scattering by atoms and molecules.

• Applied Science and Convergence Technology
• /
• v.23 no.2
• /
• pp.83-89
• /
• 2014

Adsorption of residual gas molecules damped the emission current of a W (310) field electron emission (FE) emitter. The damping speed was linearly proportional to the pressure gauge readings at pressure ranging from ${\sim}10^{-8}Pa$ to ${\sim}10^{-9}Pa$, and the proportionality constant was employed to measure pressure in the $10^{-10}Pa$ range. A time plot of FE current revealed the existence of an "initial stable region" after the flash heating of W(310) FE, during which the FE current damps very slowly. The presence of non-hydrogen gas removed this region from the plot, supplying a means of qualitatively analysing the gas species.