• 제목/요약/키워드: Electron density

검색결과 2,363건 처리시간 0.037초

Megavoltage Cone-Beam CT 영상의 변환을 이용한 선량 계산의 정확성 향상 (Improvement of the Dose Calculation Accuracy Using MVCBCT Image Processing)

  • 김민주;조웅;강영남;서태석
    • 한국의학물리학회지:의학물리
    • /
    • 제23권1호
    • /
    • pp.62-69
    • /
    • 2012
  • 적응 방사선 치료(Adaptive Radiation Therapy, ART)를 실행하기 위한 매 치료 마다 획득되는 Megavoltage cone-beam CT (MVCBCT) 영상을 이용한 재 선량 계산 과정은 필수적이다. 본 연구의 목적은 intensity 보정 방법을 적용한 MVCBCT 영상 기반의 선량 계산 결과와 kilo-voltage CT (kV CT) 영상 기반의 선량 계산 결과의 비교 및 MVCBCT 영상 기반의 선량계산 정확성의 향상이다. MVCBCT 영상의 intensity 교정을 위해 kV CT와 MVCBCT을 이용하여 12 종류의 전자밀도 바를 제공하는 Cheese 팬텀 영상을 획득하고, Cheese 팬텀 영상의 동일한 전자밀도 바에서 표현되는 kV CT 영상과 MVCBCT 영상의 intensity 관계를 도출하였다. 이후 kV CT, MVCBCT를 이용한 Rando 팬텀 영상을 획득하여 MVCBCT 영상은 3차원 강체 정합을 수행하였고 본 과정을 통해 MVCBCT 영상은 kV CT 영상과 마치 동일한 모달리티에서 획득한 영상과 같은 위치 및 intensity 분포로 변환되었고, MVCBCT 영상의 잡음을 없애기 위한 Gaussian smoothing 필터를 적용하였다. 위의 과정을 거친 MVCBCT 영상을 토대로 intensity 교정을 적용한 영상과, intensity 교정을 적용하지 않은 영상, kV CT영상을 기반으로 방사선 치료 계획 시스템을 이용한 선량 계산을 시행 하였다. 선량 계산의 결과는 선량 분포의 차이 및 Percentage difference로 평가되었다. Intensity 보정을 적용한 MVCBCT 영상의 선량 계산 결과의 경우 kV CT 영상 기반의 선량 계산 결과와의 Percentage difference가 두경부 영상의 경우 1.08%, 흉부 영상의 경우 2.44%였다. 본 연구에서 적용한 intensity 변환을 통해 MVCBCT 영상을 이용한 선량 계산의 정확성이 향상됨을 확인하였고, 본 연구 방법은 실제 선량 계산에 적용 및 사용의 편리성을 확인하였다. 차후 연구 계획도 본 연구 내용에 의해 제안되었다.

2종의 열가압 도재와 법랑질 간의 마모에 관한 연구 (An in-vitro wear study of human enamel opposing heat-pressed ceramics)

  • 박찬용;전영찬;정창모;윤미정
    • 대한치과보철학회지
    • /
    • 제47권1호
    • /
    • pp.21-28
    • /
    • 2009
  • 연구목적: 2종의 열가압 도재 (e.max Press, Empress Esthetic)와 법랑질 간의 마모양상을 알아보기 위하여 장석계 도재 및 제 3형 금합금과 비교, 관찰하였다. 연구 재료 및 방법: 열가압 도재 e.max Press, Empress Esthetic 및 금속도재관 제작용 장석계 도재 Cermaco 3, 제 3형 금합금으로 원반형 시편을 제작하고, 상대 마모재로는 발거된 건전한 소구치의 교두를 이용하여 Pin-on-disk tribometer 상에서 마모시험 하였다. 법랑질의 마모량은 마모 전후 치아 시편의 무게 변화를 측정하여 부피로 환산하였고, 도재 및 금합금 시편의 평균 표면 조도와 마모트랙 깊이를 표면조도기로, 마모트랙 폭을 주사전자현미경으로 측정하여 마모 양상을 비교하였다. 결과: 1. 법랑질의 마모량은 Ceramco 3군에서 가장 크고 Empress Esthetic군, e.max Press군, 금합금군 순으로 작았으며, Ceramco 3군과 Empress Esthetic군 사이와, Empress Esthetic군, e.max Press군 및 금합금군 사이에는 유의한 차이가 없었다 (P>.05). 2. 마모시험 후 도재 시편의 평균 표면 조도는 Ceramco 3군, Empress Esthetic군, e.max Press군 순으로 작았으며, Empress Esthetic군과 Ceramco 3군 사이에는 유의한 차이가 없었다 (P>.05). 3. 마모트랙의 깊이는 모든 군 사이에 유의한 차이는 없었고 (P>.05), 마모트랙의 폭은 법랑질 마모량 순서와 동일하게 Ceramco 3군, Empress Esthetic군, e.max Press군, 금합금군 순으로 작았으며, e.max Press군과 Empress Esthetic군 사이 및 Empress Esthetic군과 Ceramco 3군 사이에 유의한 차이는 없었다 (P>.05). 결론: 열가압 도재는 장석계 도재보다 법랑질을 더 마모시키지는 않았다.

만성신부전 백서에서 항고혈압제의 종류에 따른 신부전의 진행과 사구체의 형태학적 변화 (Effects of Antihypertensive Drugs on Renal Function and Glomerular Morphology in Chronic Renal Failure Rats)

  • 홍성진;김교순;김병길;박경화;김기혁
    • Childhood Kidney Diseases
    • /
    • 제6권2호
    • /
    • pp.169-177
    • /
    • 2002
  • 목적 : 만성신부전은 신장에 병적 손상이 있어 지속적으로 신기능이 저하되어 말기신부전에 이르게 된다. 만성신부전의 진행을 지연시킬 수 있는 인자 중 혈압조절이 중요한 것으로 알려져 있다. 저자들은 부분 신절제를 이용하여 만성신부전을 유발시킨 후 항고혈압제로 enalapril과 nicardipine을 투여하여 만성신부전의 진행에 미치는 영향을 조사하였다. 대상 및 방법 : 백서에서 5/6 신절제술로 만성신부전을 유발시킨 후 무작위로 대조군, enalapril 투여군(E군), nicardipine 투여군(N군)으로 나누어 4주 간격으로 꼬리 동맥압을 측정하고 12주째 24시간 소변 단백량과 creatinine배설량, 혈청 creatinine을 측정한 후 희생시켜 신조직을 광학현미경과 전자현미경으로 관찰하여 사구체의 형태학적 소견을 조사하였다. 결과 : 1. 신절제 후 대조군은 지속적으로 혈압이 증가하였으나 E군과 N군에서는 정상 혈압이 유지되었다. 2. 12주째 E군에서 요단백량은 대조군과 N군에 비하여 유의하게 적었다. 3. 12주째 조사한 신장의 형태계측학적 검사에서 E군과 N군 모두에서 mesangium의 증식이 대조군에 비하여 유의하게 적었으나 사구체 용적은 E군에서만 대조군에 비하여 적었다. 4. 대조군, E군, N군간의 상피세표 족돌기의 형태학적 변화의 차이는 없었다. 결론 : 부분 신절제로 유발한 만성신부전 백서에서 enalapril, nicardipine 모두 고혈압을 예방하였으나 enalpril 투여군에서 단백뇨의 감소와 신병변 발생 예방 효과가 우수하였으며, 상피세포 족돌기의 변화에는 차이가 없었다.

  • PDF

다시마(Saccharina japonica)의 생장에 따른 영양염 및 CO2 흡수율과 광합성 특성 변화 (Variations in Nutrients & CO2 Uptake Rates and Photosynthetic Characteristics of Saccharina japonica from the South Coast of Korea)

  • 황재란;심정희;김정배;김숙양;이용화
    • 한국해양학회지:바다
    • /
    • 제16권4호
    • /
    • pp.196-205
    • /
    • 2011
  • 국내 해조류 양식종인 다시마(Saccharina japonica (Laminaria japonica Areschoug))의 영양염 및 무기탄소 흡수율과 광합성 특성을 살펴보기 위해, 부산시 기장군 일광해역 양식장에서 2011년 l월부터 5월동안 시료를 채집하여 실내 배양하였다. 배양 시료의 엽장과 엽폭 범위는 각각 46~288 cm, 4.8~22.0 cm였으며, 이들의 용존산소 평균 생산율은 $6.9{\pm}5.8{\mu}mol\;g^{-1}$ fresh weight(FW) $h^{-1}$, 질산염과 인산염 흡수율은 각각 $175.6{\pm}161.1\;nmol\;g^{-1}\;FW\;h^{-1}$, $12.7{\pm}10.1\;nmol\;g^{-1}\;FW\;h^{-1}$ 그리고 용존무기탄소 흡수율은 $8.9{\pm}7.9{\mu}mol\;g^{-1}\;FW\;h^{-1}$이었다. 다시마 엽장에 따른 이들 성분의 생산/흡수율은 로그함수 관계를 보여, 엽장 100~150 cm 이상부터는 다시마의 광합성 및 생장율이 다소 둔화되는 것으로 나타났다. 용존 산소 생산율과 질산염, 인산염, $TCO_2$ 흡수율은 각각 음의 선형관계를 보였으며, 특히 용존산소 생산율과 $TCO_2$ 흡수율은 높은 상관관계 ($r^2$=0.94)를 나타내어 서로에 대한 간접 지표가 될 수 있음을 의미한다. 다시마의 최대양지수율($F_v/F_m$)과 용존산소 및 무기탄소 생산/흡수율사이에 선형관계가 나타났으며, 양자수율이 높을수록 활발한 광합성작용으로 용존산소 생산이 활발함을 증명하였다. 광합성 형광특성 중 최대상대전자전달률은 비교적 엽체가 생장할수록 증가하였으며, 엽체의 부착부에 비해 상부 말단으로 갈수록 증가하였다. 이는 다시마가 생장할수록 광합성활성 조직 비(단위 면적당 습중량)가 증가하여 나타난 결과로 사료된다. 기장해역에서 다시마에 의한 연간 무기탄소 흡수량은 $1.0\sim1.7{\times}10^3C$ ton으로 추정되며, 이는 부산시 이산화탄소 배출량의 0.02~0.03%에 해당한다. 따라서 해조류에 의한 연안의 탄소 및 물질순환과 지구시스템에서의 역할을 파악하기 위해 추가적인 연구가 필요할 것으로 생각된다.

HWE(Hot wall epitaxy)에 의한 CuGaSe$_2$단결정 박막 성장과 특성에 관한 연구 (The study of growth and characterization of CuGaSe$_2$ single crystal thin films by hot wall epitaxy)

  • 홍광준;백형원
    • 한국결정성장학회지
    • /
    • 제10권3호
    • /
    • pp.189-198
    • /
    • 2000
  • 수평전기로에서 $CuGaSe_2$다결정을 합성하여 HWE(Hot Wall Epitaxy) 방법으로 $CuGaSe_2$단결정 박막을 반절연 성 GaAs(100)기판 위에 성장하였다. $CuGaSe_2$단결정박막은 증발원의 온도를 $610^{\circ}C$, 기판의 온도를 $450^{\circ}C$로 성장하였다. 이때 성장된 단결정 박막의 두께는 2.1$\mu\textrm{m}$였다. 단결정 박막의 결정성의 조사에서 20K에서 광발광(photoluminescence) 스펙트럼이 672.6nm(1.8432 eV)에서 exciton emission 스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 요동곡선(DCRC)의 반폭치(FWHM)도 138 arcsec로 가장 작아 최적 성장 조건임을 알 수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293 K에서 각각 $4.87{\times}10^{23}$ electron/$m^{23}$ , $1.29{\times}10^{-2}$$\m^2$/v-s였다. $CuGaSe_2$ 단결정 박막의 광전류 단파장대 봉우리들로부터 20K에서 측정된 $\Delta$Cr(crystal field splitting)은 약 0.0900 eV $\Delta$So(spin orbit coupling)는0.2493 eV였다. 20K에서 광발광 봉우리의 667.6nm(1.8571 eV)는 free exciton($E_x$), 672.6nm(1.8432 eV)는 acceptor-bound exciton 인 $I_2$와 679.3nm(1.8251 eV)는 donor-bound exciton인 $I_1$였다. 또한 690.9nm(1.7945 eV)는 donor-acceptor pair(DAP) 발광 $P_0$이고 702.4nm(1.7651 eV)는 DAP-replica $P_1$, 715.0nm(1.7340 eV)는 DAP-replica $P_2$, 728.9nm(1.7009 eV)는 DAP-replica $P_3$, 741.9nm(1.6711 eV)는 DAP-replica $P_4$로 고찰된다. 912.4nm(1.3589 eV)는 self activated(SA)에 기인하는 광발광 봉우리로 고찰되었다.

  • PDF

실라노 펜의 적용이 장석계 도재 및 지르코니아와 레진의 전단결합강도에 미치는 영향 (The effect of Silano-pen on the shear bond strength of resin to feldspathic porcelain and zirconia)

  • 신명식;이정열;김민수;신상완
    • 대한치과보철학회지
    • /
    • 제52권1호
    • /
    • pp.1-8
    • /
    • 2014
  • 연구 목적: 본 연구의 목적은 장석형 도재와 지르코니아에 Silano-pen의 적용이 복합레진과의 전단결합강도에 미치는 영향을 알아보고자 하는 것이다. 연구 재료 및 방법: 장석형 도재와 지르코니아를 지름 12 mm, 두께 2 mm 크기로 각각 30개씩 제작하여 표면을 고르고 평활하게 한 후 아크릴 레진에 포매 하였다. 각각 Group F와 Group Z로 나눈 후, (1) Group F1과 Z1은 불산 에칭과 실레인, (2) Group F2와 Z2는 Silano-pen과 실레인, (3) Group F3와 Z3는 불산 에칭과 Silano-pen, 실레인을 적용시켰다. 표면 처리 후, 각각의 시편의 표면을 주사전자현미경으로 관찰하였다. 높이 2 mm, 직경 3 mm의 복합레진을 붙여 광중합 하고 만능시험기를 이용하여 세라믹과 복합레진간의 전단결합강도를 측정하였다. 측정값을 Two way ANOVA와 Tukey's multiple comparison test을 사용하여 통계 분석 하였다(${\alpha}=.05$). 결과: 주사전자현미경의 관찰에서 Group F2와 F3에서 가장 거친 표면을 볼 수 있었으며, Group Z3에서 실리카 입자의 분포밀도가 가장 높았다. 장석형 도재에서는 전단결합강도 측정 결과 Group F3가 가장 높게 측정되었고 Group F1이 가장 낮게 측정되었지만, Group간에 통계학적 유의성은 없었다. 지르코니아에서는 Group Z3가 가장 높게 측정되었고 Group Z1이 가장 낮게 측정되었으며, Group간에 모두 통계학적 유의성이 있었다. 결론: 지르코니아에서는 불산 에칭의 적용 후 Silano-pen과 실레인의 적용이 복합레진 접착에 효과적이다.

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

그물코쥐치, Rudarius ercodes의 생식주기 (Reproductive Cycle of Small Filefish, Rudarius ercodes)

  • 이택열
    • 한국수산과학회지
    • /
    • 제17권5호
    • /
    • pp.423-435
    • /
    • 1984
  • 1982년 9월부터 1983년 8월까지 일본국 정강현 빈명군 빈명호입구 연안에서 채집된 그물코쥐치, Rudarius ercodes를 대상으로 생식생태를 파악하기 위하여 연간 생식소숙도지수(GSI)와 간숙도지수(HSI)의 변화를 조사하였고 이들 생식소발달과정을 광학 및 전자현미경적 방법에 의해 조사하였다. GSI는 일장이 길어지며 수온이 상승하는 3월부터 상승하기 시작하여 6월에서 8월까지 년중 최대값을 나타내고, 9월부터 하강하여 11월부터 이듬해 2월까지 변화없이 연중 최저값을 나타냈다. GSI의 연간변화는 수컷의 경우 뚜렷하지 못하고 암컷의 경우는 GSI와 역상관 관계를 가지고 변하고 있다. 즉 생식소가 발달하는 하계에는 HSI값이 떨어지고, 생식소가 퇴화되는 동계에는 HSI값이 최대로 높아진다. 난소는 많은 난소소낭으로 구성된 1쌍의 낭상형 구조를 이루고 있고, 이들 난소소낭 상피에서 난원세포가 분열증식되고 있다. 초기 난모세포는 세포질이 호염기성이고 핵막을 따라 여러 개의 분산인을 가진다. 완숙 난모세포는 $300{mu}$ 내외로 핵이 동물극으로 이동되면서 핵막이 소실되고, 원형질구성이 극히 한정되며, 대부분의 세포질은 난황과 유구에 의해 충만된다. 배란후 난소소낭에 잔존하는 여포성장중인 난모세포들은 퇴화흡수되나, 아직 여포가 형성되지 못한 초기 주변인기 난모세포들은 퇴화되지 않고 이듬해 난소활성과 함께 성장되어 간다. 난모세포가 성숙되고 난황 축적이 활발해지면서 mitochondria와 과립성소포체가 급격히 증가하는데 이들은 난모세포의 성숙과 난황 축적에 기능적으로 관계가 있는 것 같다. 성숙난모세포의 미세융모의 홈에 뻗은 여포돌기 선단에 난황전구물질로 생각되는 $5{\sim}6$ 층의 원반상고전자밀도 구조물이 나타나고 있다. 정소는 좌우 1 쌍의 엽상구조를 가지며 후방에서 합일되어 저정낭을 이룬다. 정소의 피질층은 정자형성이 일어나는 정소소낭으로 구성되어 있고 수질층은 이들 소낭과 연결된 여러 갈래의 수정관이 분포한다. 성장중인 정소의 간질에는 소관상 cristae가 발달된 대형 mitochondria와 다수의 소포체를 가진 steroid 계 hormone 생성분필세포가 존재한다. 정자의 두부는 핵중앙에 깊이 함입된 중심강이 있어 U 자형을 이루고 첨체는 극히 빈약하다. 중편의 mitochondria는 커다란 구형의 부핵을 형성하고 있으며, 미부의 axoneme을 이루는 미세소관은 9+9+2형을 나타낸다. 생식연주기는 3월부터 7월에 걸친 성장기 5월부터 9월까지의 성숙기, 5월중순부터 10월 초순까지의 산란기, 그리고 10월부터 이듬해 2월까지의 휴식기 등 연속적인 주기로 구분할 수 있었고 산란성기는 6월부터 8월까지였다.

  • PDF

녹용, 홍삼, 홍화, ipriflavone 및 estrogen이 난소적출 rat의 체중, 골밀도, 장기중량 및 조직학적 변화에 관한 연구 (Effects of antler, red ginseng, safflower, ipriflavone and estrogen on body weight, bone mineral density, organ weight and histological change in ovariectomized rats)

  • 유상식;김상근;이명헌;송운재;문병천;김무강
    • 한국동물위생학회지
    • /
    • 제23권3호
    • /
    • pp.235-245
    • /
    • 2000
  • This study was peformed to elucidate the effects of antler, red ginseng, safflower seed, ipriflavone and estrogen on ovariectomized rats. The rats were fed with Ca and P deficient diet for five weeks to induce osteoporosis. After this period, these animals were fed with normal for and treated every other day with antler(600mg/kg, PO), red ginseng(200mg/kg, PO), safflower(200mg/kg, PO), ipriflavone(80mg/kg, PO) and estrogene(400$\mu\textrm{g}$/kg, IM) for S weeks. During the treatment, the rats were examined for body, organ, femur and femur ash weights. And electron-microscopical examinations were also performed on femora. The results are summarized as follows : 1. The body weights of the antler, red ginseng, safflower, ipriflavone and estrogen-treated groups after five weeks of treatment, were 303.0$\pm$3.0g, 273.3$\pm$4.4g, 288.3$\pm$5.1g, 300.5$\pm$5.2g, 320.5$\pm$4.2g, respectively. They, except the red ginseng-treated group, were significantly higher than 278.4$\pm$2.7g of normal control group(P<0.05). And the body weight of non-treatment group was 29it.2$\pm$5.5g which was higher than that of control group, too. 2. The weights of left femur after five weeks of treatment were showed 0.83$\pm$0.2g by antler, 0.89$\pm$0.2g by red ginseng, 0.87$\pm$0.2g by safflower 0.83$\pm$0.1g by ipriflavone and 0.78$\pm$0.1g by estrogen-treated group. They were a little lower than 0.97$\pm$0.1g of normal control group. Non-treatment group showed 0.83$\pm$0.1g which was lower than that of control group but not significant. 3. The weights of ashed left femora after five weeks of treatment were showed 0.36$\pm$0.01g by antler, 0.40$\pm$0.01g by red ginseng, 0.41$\pm$0.01g by safflower, 0.36$\pm$0.01g by ipriflavone and 0.35$\pm$0.01g by estrogen-treated group. Those results were significantly lower than 0.43$\pm$0.01g of normal control group. And non-treatment group showed 0.29$\pm$0.01g of femoral ash which was significantly lower than that showed by control group(p<0.05). 4. The femoral Ca contents of the antler, red ginseng, safflower, ipriflavone and estrogen-treated rats were 19.6$\pm$0.7%, 17.8$\pm$1.1%, 18.8$\pm$0.9%, 18.0$\pm$1.1%, 15.3$\pm$1.1%, respectively, after five weeks of treatment. The femoral Ca contents of antler and safflower-treated groups were higher than that of control group which showed 18.2$\pm$0.9% of Ca The non-treatment group, showing 15.3$\pm$0.7%, had significantly lower content of Ca than normal group(p<0.05). 5. The weights of liver, spleen, and kidney in the osteoporosis-induced rats during the treatment with antler, red ginseng, safflower, jpriflavone and estrogen showed not significant changes. 6. The connections among the trabeculae of control group were maintained well, showing no bone loss. However, the connections among the trabeculae of non-treatment group were thinner than those of control group and were almost disconnected and the lacunae were found to be broadened. Antler and safflower-treated group showed only slight changes. The recovery rates were prominent in antler, safflower, estrogen-treated groups but they were insignificant in red ginseng and ipriflavone-treated groups.

  • PDF

치수유래 구심성 신경섬유의 삼차신경 감각핵군에서의 연접특성 (ULTRASTRUCTURAL ANALYSIS OF TOOTH PULP AFFERENTS TERMINALS IN THE MEDULLARY DORSAL HORN OF THE RAT)

  • 배용철;이은희;최민기;홍수형;김현정;남순현;김영진
    • 대한소아치과학회지
    • /
    • 제28권2호
    • /
    • pp.219-227
    • /
    • 2001
  • 일차연접부위에서 악안면 영역에서 유래하는 유해자극의 전달 및 처리기전을 이해하고자 horseradish peroxidase를 치수지배 구심성 신경섬유를 표식한 후 연수후각에서 미세구조 및 연접양상을 분석하여 다음과 같은 결과를 얻었다. 표식종말은 소수의 큰 치밀소포가 관찰되는 종말 (S형) 및 다수의 치밀소포를 함유하는 종말 (LDCV형)등 2종류로 분류할 수 있었다. S형 및 LDCV형 표식종말의 연접양식은 유사하였으며, 다수의 표식종말이 1개 혹은 2개의 neurofile과 연접을 이루어 대단히 단순한 연접양상을 보였다. 표식종말은 가지돌기체 보다는 다수의 가지돌기가시와 연접을 이루는 빈도가 높았다. 표식종말이 세포체 및 이에 인접한 근심부 가지돌기와 연접하는 경우는 드물었으며, 소수의 표식종말에서 p-ending과 연접하는 경우를 보였다. 표식종말의 체적, 표면적, 사립체의 체적, neurofile과 접하는 면적, 활성부위의 면적, 단위표식종말당 연접소포의 수 및 연접소포의 밀도등은 넓은 범위의 계측치를 나타내었으며, 이는 S형 및 LDCV형 표식종말 사이에 유의한 차이가 없었다. 이상의 결과로 미루어보아 연수후각에서 치수유래 구심성 신경섬유 종말의 연접양식은 고유의 특징을 보이며, 이는 신경회로의 기능과 밀접한 상관관계를 가지는 것으로 판단되었다.

  • PDF