• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.10
• /
• pp.458-463
• /
• 2003

In order to develope piezoelectric transformer for the ballast of fluorescent lamp, a new shape and electrode pattern of piezoelectric transformer has been investigated in this work. The composition of piezoelectric ceramics was 0.95Pb(Zr$_{0.51}$Ti$_{0.49}$)O$_3$+0.03Pb(Mn$_{1}$3/Nb$_{2}$3/)O$_3$+0.02Pb(Sb$_{1}$2/Nb$_{1}$2/)O$_3$. The sample prepared by this composition system showed the characteristics which has about 1200 of relative dielecric constant, 1100 of the mechanical quality factor, 0.53 of the electromechanical coupling coefficient, 320 pC/N of the piezoelectric constant d$_{33}$, 0.3 % of the dissipation factor. Diameter and thickness of disk-type piezoelectric transformer was 45 mm and 4 mm, respectively. The driving and generating electrode with their gap of 1mm were fabricated on the top surface. But the common electrode was fabricated on the whole bottom surface. The electrode surface ratio of driving and generating part on the top surface ranges from 1.4:1 to 3:1. We investigated the electrical characteristics with the variation of the electrode surface ratio of driving and generating part in the range of load resistance of 100 $\Omega$～70 k$\Omega$. The set-up voltage ratio of this piezoelectric transformer increases with increasing both the electrode surface of driving part and the load resistance. The set-up voltage ratio at no load resistance was more than 60 times. On the other hand, the efficiency decreases with increasing the electrode surface of driving part. In the case of the electrode surface of both 1.4:1 and 2:1, maximum efficiency showed above 97 % at load resistance of 2 k$\Omega$. However, in the case of the electrode surface of 3:1, maximum efficiency showed about 94 % at load resistance of 3 k$\Omega$.>.>.>.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.6
• /
• pp.283-286
• /
• 2012

(1-X)$(Na_{0.5}K_{0.5})NbO_3-XK_{5.4}Cu_{1.3}Ta_{10}O_{29}$ (NKN-KCT) lead-free piezoelectric ceramics have been synthesized by the conventional solid state sintering method, and their sinterability and piezoelectric properties were investigated. Typically, this material is sintered between 1,025 and $1,100^{\circ}C$ for 2 hours to achieve the required densification. Crystalline structures and Microstructures were analyzed by X-ray diffraction and scanning electron microscope. The density, dielectric constant (${\varepsilon}_r$), piezoelectric constant $d_{33}$, electromechanical coupling factor $k_p$ and mechanical quality factor $Q_m$ value of the NKN ceramics depended upon the KCT content and the sintering temperature. In particular, the KCT addition to NKN greatly improved the mechanical quality factor $Q_m$ value. The ceramic with X = 1.0 mol% sintered at $1,050^{\circ}C$ exhibited optimum properties (${\varepsilon}_r$=246, $d_{33}$=95, $k_p$=0.38 and $Q_m$=1,826). These results indicate that the ceramic is a promising candidate material for applications in lead free piezoelectric transformer and filter materials.

• Korean Journal of Materials Research
• /
• v.25 no.10
• /
• pp.566-570
• /
• 2015

$Bi_{0.5}Na_{0.5}TiO_3$ (BNT) based ceramics are considered potential lead-free alternatives for $Pb(Zr,Ti)O_3$(PZT) based ceramics in various applications such as sensors, actuators and transducers. However, BNT-based ceramics have lower electromechanical performance as compared with PZT based ceramics. Therefore, in this work, lead-free bulk $0.99[(Bi_{0.5}Na_{0.5})_{0.935}Ba_{0.065}]_{(1-x)}La_xTiO_3-0.01SrZO_3$ (BNBTLax-SZ, with x = 0, 0.01, 0.02) ceramics were synthesized by a conventional solid state reaction The crystal structure, dielectric response, degree of diffuseness and electric-field-induced strain properties were investigated as a function of different La concentrations. All samples were crystallized into a single phase perovskite structure. The temperature dependent dielectric response of La-modified BNBT-SZ ceramics showed lower dielectric response and improved field-induced strain response. The field induced strain increased from 0.17%_for pure BNBT-SZ to 0.38 % for 1 mol.% La-modified BNBT-SZ ceramics at an applied electric field of 6 kV/mm. These results show that La-modified BNBT-SZ ceramic system is expected to be a new candidate material for lead-free electronic devices.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.3
• /
• pp.214-219
• /
• 2000

In this paper the structural dielectric and piezoelectric properties of Pb［(M $g_{1}$2// $W_{1}$2/)$_{x}$-(N $i_{1}$3//N $b_{2}$3/)$_{0.15-x-(Zr_{0.5})}$ $Ti_{0.5}$)$_{0.85}$］ $O_3$ (x=0.0~0.10) ceramic were investigated with the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$. According to the substitution of Pb(M $g_{1}$2//W/1/2/) $O_3$ curie temperatures were slightly decrease due to the decrease of the tetrag-onality of crystal structure and coercive fields were decreased. Up to the substitution of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ 3mol%,remnant polarization dielectric constant piezoelectric constant were increased. Dielectric constant and electro-mechanical coupling factor( $k_{p}$, $k_{31}$ ) were appeared the highest value of 2230, 0.64, and 0.38 and piezoelectric constant( $d_{33}$ , $d_{31}$ ) was the largest value of 418, 202($\times$10$^{-12}$ /C/N), respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/N) respectively, when the substitution amount of Pb(M $g_{1}$2// $W_{1}$2/) $O_3$ was 3mol%.s 3mol%.%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.261-261
• /
• 2007

Wearable and ubiquitous micro systems will be greatly growing and their related devices should be self-powered in order to avoid the replacement of finite power sources, for example, by scavenging energy from the environment. With ever reducing power requirements of both analog and digital circuits, power scavenging approaches are becoming increasingly realistic. One approach is to drive an electromechanical converter from ambient motion or vibration. Vibration-driven generators based on electromagnetic, electrostatic and piezoelectric technologies have been demonstrated. Among various generator types proposed so far, piezoelectric generator possesses considerable potential in micro system. To overcome low mechanical-to- electric energy conversion, the piezoelectric device should activate in resonance mode in response to external vibration. Normally, the external vibration excretes at low frequency ranging 0.1 to 200 Hz, whereas the resonant frequencies of the devices are fixed as constant. Therefore, keeping their resonant mode in varying external vibration can be one of important points in enhancing the conversion efficiency. We investigated the possibility of use of multi-bender type piezoelectric devices. To match the external vibration frequency with the device resonant frequency, the various devices with different resonant frequency were chosen. Under an external vibration acceleration of 0.1G at 120 Hz, the device exhibited a peak-to-peak voltage of 2.8 V and a power of 0.5 mw in resonance mode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.3
• /
• pp.204-208
• /
• 2013

In this study, $KNbO_3$-substituted (Li,Na,K)(Nb,Sb,Ta)$O_3$ ceramics were investigated to develop Pb-free composition ceramics for multilayer actuator and energy harvester applications. The X-ray diffraction analysis indicated that all samples were pure perovskite phase and no secondary phase was found. A tetragonality as a function of $KNbO_3$ substitution showed the maximum value at 1.5 mol% $KNbO_3$ and then decreased. The SEM image analysis showed the maximum grain size of $3.14{\mu}m$ at 1.5mol% $KNbO_3$. In the composition ceramics with 1.5 mol% $KNbO_3$ sintered at $1,100^{\circ}C$, excellent properties of density= 4.75 $g/cm^3$, electromechanical coupling factor ($k_p$)= 0.50 and piezoelectric constant($d_{33}$)= 290 pC/N were obtained, respectively, suitable for piezoelectric actuator and energy harvester applications.

• International Journal of Computer Science & Network Security
• /
• v.22 no.9
• /
• pp.307-315
• /
• 2022

The review of known decision-making support systems and technologies regarding the possibility of donation and transplantation showed that currently there are no systems and technologies of decision-making support regarding the possibility of donation and transplantation considering civil law. The paper models the decision-making support process regarding the possibility of donation and transplantation, which is a theoretical basis for the development of rules, methods and technology of decision-making support regarding the possibility of donation and transplantation considering civil law. The paper also developed the technology of decision-making support regarding the possibility of donation and transplantation considering civil law as a component of the Unified State Information System for Organ and Tissue Transplantation, which automatically and free of charge determines the possibility/impossibility of donation and transplantation. In the case of the possibility of donation, the admissible type of donation is also determined - over-life or after-life donation - and data about potential donor is entered in the relevant Donor Register. In the case of the possibility of transplantation, if the recipient needs a transplant of one of the paired organs or a part of the organ/tissue, then data about potential recipient are entered in the Transplantation List from both over-life and after-life donor, otherwise, if the recipient needs a transplant of a non-paired organ or both paired organs, then data about potential recipient are entered only in the Transplantation List from after-life donor.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.36 no.2
• /
• pp.191-196
• /
• 2023

In this paper, for the application of ultrasonic cleaners for cleaning dentures and transparent braces, Pb(Mn_1/3Nb_2/3)O₃-Pb(Ni_1/3 Nb_2/3)O₃-Pb(Zr,Ti)O₃ [PMN-PNN-PZT] system ceramics were manufactured and their dielectric and piezoelectric properties were investigated. Overall the best properties suitable for the device applications such as ultrasonic cleaner were obtained from the ceramics sintered at 920℃: bulk density of 7.8 g/cm³, the dielectric constant (ε_r) of 1,689, piezoelectric charge constant (d₃₃) of 433 pC/N, planar electromechanical coupling factor (k_p) of 0.64, mechanical quality factor (Qm) of 835, S₁₁^E of 13.37 (10^-12 N/m²), and Curie temperature of 315℃ By using the physical properties of this composition, the ultrasonic cleaner was designed and simulated using the commercial ATILA software. For the three-layered ceramics with the dimension of 25 mm × 25 mm × 2.5mm, an excellent displacement of 8.998 10^-3 m) and the sound pressure of 147.68 dB were recorded.

• Korean Journal of Materials Research
• /
• v.33 no.5
• /
• pp.189-194
• /
• 2023

This study uses first-principles calculations to investigate the mechanical properties and effect of strain on the electronic properties of the 2D material 1H-PbX₂ (X: S, Se). Firstly, the stability of the 1H Pb-dichalcogenide structures was evaluated using Born's criteria. The obtained results show that the 1H-PbS₂ material possesses the greatest ideal strength of 3.48 N/m, with 3.68 N/m for 1H-PbSe₂ in biaxial strain. In addition, 1H-PbS₂ and 1H-PbSe₂ are direct semiconductors at equilibrium with band gaps of 2.30 eV and 1.90 eV, respectively. The band gap was investigated and remained almost unchanged under the strain ε_xx but altered significantly at strains ε_yy and ε_bia. At the fracture strain in the biaxial direction (19 %), the band gap of 1H-PbS₂ decreases about 60 %, and that of 1H-PbSe₂ decreases about 50 %. 1H-PbS₂ and 1H-PbSe₂ can convert from direct to indirect semiconductor under the strain ε_yy. Our findings reveal that the two structures have significant potential for application in nanoelectronic devices.

• Journal of the Semiconductor & Display Technology
• /
• v.23 no.2
• /
• pp.1-5
• /
• 2024

In the electronics industry, a lot of research and development is being conducted on electronic component supply, component alignment and insertion, and automation of soldering on the back side of the PCB for automatic PCB assembly. Additionally, as the use of electronic components increases in the automotive component field, there is a growing need to automate the alignment and insertion of components with leads such as transistors, coils, and fuses on PCB. In response to these demands, the types of PCB and parts used have been more various, and as this industrial trend, the quantity and placement of automation equipment that supplies, aligns, inserts, and solders components has become important in PCB manufacturing plants. It is also necessary to reduce the pre-setting time before using each automation equipment. In this study, we propose a method in which a vision system recognizes the type of component and simultaneously corrects alignment errors during the process of aligning and inserting various types of electronic components. The proposed method is effective in manufacturing various types of PCBs by minimizing the amount of automatic equipment inserted after alignment with the component supply device and omitting the preset process depending on the type of component supplied. Also the advantage of the proposed method is that the structure of the existing automatic insertion machine can be easily modified and utilized without major changes.