• 한국습지학회지
• /
• 제12권1호
• /
• pp.95-103
• /
• 2010

유량자료는 물의 순환과정을 규명하고 효율적인 수자원 개발 및 이수 치수 계획 등에 매우 귀중하게 이용된다. 그러나 이러한 유량자료를 확보하는데 많은 시간과 경비 등이 요구되기 때문에 주요 수위에서 유량자료는 수위-유량관계곡선식(Stage-Discharge Curve)을 개발하여 유량을 산정하고 있다. 따라서 수위-유량관계곡선식의 신뢰도는 유량자료의 품질에 절대적인 영향을 미치는 요인으로 작용된다. 수문학을 전공하고 연구하는 많은 학자들은 고품질의 유량자료를 생산하여 신뢰성 있는 곡선식을 개발하고자 유량측정 방법과 기준, 장비개발 및 개량 등에 관한 연구를 수행하고 있다. 현재 국내에서는 다양한 유량측정기기를 사용하여 유량자료를 생산하고 활용하고 있으나, 측정기기별 정확도 및 실험적 측정성과에 대한 연구자료가 미흡한 실정이다. 본 연구에서는 규격화된 콘크리트 수로에 일정한 유량을 흘려보내는 조건에서 다양한 측정기기를 이용하여 유속을 측정하였다. 그리고 이 측정성과를 이용하여 유량을 산정하고 비교분석하였다. 실험을 위해서 국내에서 일반적으로 사용되고 있는 측정기기로 프라이스 유속계(USGS Type AA Current Meter), 휴대용 유량계(Flow Meter), 초음파식 디지털 유속계(ADC), C2 유속계(C2 Small Current Meter), 플로우 트렉커(Flow Tracker), 마그네틱 유속계(Electromagnetic Current Meter) 등의 장비를 사용하여 유량을 산정하였으며, 각 기기별 산정된 유량을 비교 분석 하였다. 비교검토에 적용하고자 측정한 수심으로는 0.30 m, 0.35 m, 0.40 m, 0.45 m, 0.50 m, 0.55 m의 왕복측정 6-Case로 진행이 되었으며, 신뢰성과 정확도를 높이기 위해 도섭법으로 수면에서 0.6d 지점의 유량측정방법(1점법)을 적용하였다. USGS Type AA Current Meter, Flow Meter, ADC, C2 Small Current Meter는 유속측정기기의 검교정을 받았으므로 다른 실험유량측정치의 비교를 위한 기준값으로 사용하였다. 따라서 국내에서 널리 사용되는 측정기기(USGS Type AA Current Meter, Flow Meter, ADC, C2 Small Current Meter, Flow Tracker, Electromagnetic Current meter)별 검토 결과 평균유량 및 평균유속에 있어 프라이스 유속계를 기준으로 마그네틱 유속계 $\pm$ 10 % 이상, 플로우 트렉커 $\pm$ 10 % 미만, 휴대용 유량계, 초음파식 디지털 유속계 및 C2 유속계는 $\pm$ 5 % 미만의 차이가 있음을 확인할 수 있었다.

• 한국전자파학회논문지
• /
• 제23권2호
• /
• pp.213-219
• /
• 2012

최근 이동 통신 서비스의 증가로 인해 인류는 다양한 전자파에 동시 노출되어 있다. 그러나 전자파의 인체 영향 연구는 주로 단일 주파수에 대해서 행해졌다. 본 논문에서는 다중 주파수의 전자파를 동시에 노출시킬 수 있는 세포 실험 장치를 제작하였다. 세포 실험 장치는 836.5 MHz 주파수의 CDMA(Code Division Multiple Access) 및 1,950 MHz의 WCDMA(Wideband Code Division Multiple Access) 주파수의 신호를 동시에 발생시킬 수 있도록 광대역 특성을 갖는 radial transmission line 형으로 구성하였다. 변조된 신호는 증폭기, 디지털 감쇄기, RF 결합기를 통하여 원추형 안테나로 전달된다. SAR(Specific Absorption Rate)값은 광학 온도 프로브를 이용하여 petri dish 내 9개 지점에 대하여 3회 측정한 평균값을 이용하여 측정하였다. 측정된 안테나의 반사 손실은 -15dB 이하였고, 단위 입력 전력당 SAR 평균과 표준 편차는 CDMA 주파수에서 $0.105{\pm}0.019$ W/kg, WCDMA 주파수에서 $0.262{\pm}0.055$ W/kg이었다.

• 한국전자파학회논문지
• /
• 제24권5호
• /
• pp.534-540
• /
• 2013

휴대전화의 이용이 증가하면서, 손에 미치는 전자파의 영향에 대한 관심이 증가하고 있다. IEC TC106에서도 휴대전화의 전자파 인체 노출량 평가 방법 표준에 손 영향을 반영하기 위하여 국제적인 교류 연구가 활발하게 진행되고 있다. 현재 상용화된 손 팬텀은 평균 서양인 손을 이용하고 있을 뿐만 아니라, 한 가지 형태의 파지(把持)만 가능하기 때문에, SAR 측정 결과에 대한 분석에 제한이 많은 실정이다. 손의 영향을 제대로 분석하기 위해서는 다양한 형태의 파지가 가능한 손 팬텀이 필요하다. 또한, 국내 환경에 맞는 손 팬텀의 개발이 필수적이다. 본 논문에서는 다양한 형태의 파지가 가능한 835 MHz 대역과 1,800 MHz 대역의 한국인의 젤리형 손 팬텀을 제작하였다. 제작된 손 팬텀의 전기적 특성은 비유전율과 도전율이 CTIA(미국이동통신산업협회) 권고 기준 값의 ${\pm}10%$이내로서, CTIA에서 제시하는 오차 기준(${\pm}20%$)보다 더 우수한 특성을 나타냈다. 또한, 손 팬텀의 3D CAD(3차원 컴퓨터 이용 설계) 파일을 개발하여 손에 의한 SAR 영향 분석을 위한 시뮬레이션에서 활용할 수 있도록 하였다. 본 연구를 통해 제작된 젤리형 손 팬텀과 3D 파일은 휴대 전화의 손 영향에 대한 연구에 유용하게 이용될 수 있을 것으로 본다.

• Journal of Magnetics
• /
• 제19권2호
• /
• pp.161-169
• /
• 2014

The aim of this study is to investigate the efficacy of pulsed electromagnetic field (PEMF) on the alleviation of lumbar myalgia. This is a randomized, real-sham, double blind pilot study. 38 patients were divided into the PEMF group and the Sham group, each of which was composed of 19 patients (1 patient dropped out in the Sham group) of randomized allocation. The PEMF group was treated by using the PEMF device and the Sham group by using a sham device on the lumbar muscle and acupuncture points, three times a week for a total of two weeks. Evaluations of Visual Analogue Scale for bothersomeness (VASB), Visual Analogue Scale for pain intensity (VASP), Oswestry Disability Index (ODI), 36-Item Short Form Health Survey Instrument (SF-36), EuroQol-5Dimension (EQ-5D), Beck's Depression Inventory (BDI) and Roland-Morris Disability Questionnaire (RMDQ), etc. before and 1 week after treatment were carried out. The primary outcome measure was the VASB, measured 1 week after the end of the pulsed electromagnetic therapy. VASB scores for the PEMF group changed by $-2.06{\pm}2.12$ from the baseline, and that for the Sham group changed by $-0.52{\pm}0.82$ (p < 0.05). VASP scores for the PEMF group were reduced by $-2.10{\pm}2.12$ from the base line, and that for the Sham group was reduced by $-0.53{\pm}1.50$ (p < 0.05). PEMF group showed significant improvements in all VASB, VASP, ODI, SF-36, EQ-5D, BDI and RMDQ scores, while the Sham group showed significant improvements in all scores, except the VASP score. However, the VASB, VASP and RMDQ scores of the PEMF group were much lower than those of the Sham group. The two groups showed no significant difference in ODI, SF-36, EQ-5D and BDI. This study demonstrates the effectiveness of PEMF treatment for alleviating lumbar myalgia.

• 전기학회논문지
• /
• 제67권12호
• /
• pp.1690-1698
• /
• 2018

Recent advances in ICT technology have transformed many of our daily lives and attracted a lot of attention to personal health. Heart beat measurement that reflects cardiac activities has been used in various fields such as exercise evaluation and psychological state evaluation for a long time, but its utilization method is limited due to its differentiation from clinical electrocardiogram. Therefore, in this study, we could observe the change of the measured signal according to the change of the distance and the position of the measuring electrodes which are non-standard electrode configuration. Based on the electric dipole model of the heart, correlation with clinical electrocardiogram could be confirmed by synthesizing multiple surface potentials measured with a shorter electrode distance than standard one. From the electromagnetic point of view, the distance between the measuring electrodes corresponds to the distance that the electric potential by the cardiac electric dipole moves, and the electric potential measured at the body surface is proportional to the moving distance of the electric potential. Therefore, it is preferable to make the distance between electrodes as long as possible, and to position the measuring electrode close to the ventricle rather than the atrium. In addition, it was found that standard electrocardiographic waveforms could be synthesized by using arithmetic sum of multiple measuring electrodes due to the relationship of electrical dipole vectors, which is obtained by dividing and positioning a plurality of measuring electrodes on a reference electrode line, such as Lead-I, Lead-II direction. Also, we obtained a significant Pearson correlation coefficient ($r=0.9113{\pm}0.0169$) as a result of synthetic experiments on four subjects.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1647-1653
• /
• 2011

In the case of an urban rail chopper type subway train, varistors have been installed for protecting usual electronic equipments, semiconductor devices(diodes, transistors, thyrister, etc.) communications, measuring, control device and absorbing opening & closing surge of electromagnetic valve. These varistors were steadily reduced dielectric strength as becoming superannuated. Thus there is a problem that reacts more sensitive at the same surge in the general control operation. On existing maintenance, there is not specific standard to replace superannuated varistor. So when maintaining chopper type subway train, all varistors or old varistors that workers checked a discoloration & crack with the naked eye and noticed degradation smell by deterioration are replaced. This study suggests detail standards for judgement that varistors are good or bad chopper type subway train, and it draw a efficient maintenance which efficient maintenance can check more easy the degradation properties variation.

• Current Research on Agriculture and Life Sciences
• /
• 제24권
• /
• pp.9-16
• /
• 2006

Ultraweak photons could be emitted from the chemical reaction without any electromagnetic radient. These chemiluminescence could be detected by highly sensible photomultiplier recently. We will introduce the principal of chemiluminescence generation reaction, and the application studies in the determination of food-borne microorganisms in field. The counts of surface contaminated microorganism in mackeral and chicken for cold storage determined by ATP-chemiluminescence method had good correlation with the counts by standard agar plate method. However, there was little correlation between 2 methods in ginseng powder whose microbial counts were lower than 10,000 CFU.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.93-96
• /
• 2000

In this study, we investigated the electromagnetic properties of Mn-Zn ferrite doped with rare earth oxide (Dy$_2$O$_3$, Er$_2$O$_3$). The main composition is 52mo1% $\alpha$-Fe$_2$O$_3$, 25mo1% Mn$_3$O$_4$23mo1% ZnO and doped with them(0.05wt%~0.25wt%, step:0.05wt%). An experimental process has advanced by conventional ferrimagnetism manufacturing that was prepared by standard ceramic techniques. The XRD pattern of all doped sample were observed spinel and secondary phase. The density of sample were measured nearly constant value. As increased the additive, resistivity, initial permeability and real component of the series complex permeability increased with setting limits each other. In case of Mn-Zn ferrite excess doped with them, resistivity, initial permeability and real component of the series complex permeability decreased and magnetic loss increased in proportion to increasing the additive.

• 한국조명전기설비학회지:조명전기설비
• /
• 제5권3호
• /
• pp.78-83
• /
• 1991

This study proposes a unified method to design toroidal transformer and its optimal design algorithm. This unified design method was derived from the fundamental equation of power on the basis of electromagnetic energy of a core and the definition of three parameters(K1, K2, KW) that influence the form of a core and the ratio of a core and coil. Accordingly this design method condenses the whole data for design of toroidal transformer to a standard variable which is the inner diameter of a core. The minimal cost, weight and volume values of the transformer were computed by means of the algorithm to search the optimal values of the parameters. Furthermore, through the CAD, the efficiency of this unified design method and optimal algorithm proposed in this paper was confirmed.

• 전기학회논문지
• /
• 제62권9호
• /
• pp.1329-1334
• /
• 2013

A electric railway is unique system that electric trains consumed huge electric power are travelled and is much interested with EMC. There were several problems exceeding the standard in the frequency range of 9kHz to 150kHz because the radiation noises were moved the higher frequency range according to developing the power electronic technology. It is studied the experimental confirmation of main noise source on the electric train and the analytic simulation for reducing the noise level in this paper.