• Journal of electromagnetic engineering and science
• /
• 제16권3호
• /
• pp.150-158
• /
• 2016

This paper reports on a study of LiNiZn-ferrite composite as a radiation absorbent material (RAM). The electromagnetic (EM) wave absorbers are composed of an EM wave absorbing material and a polymeric binder. The surface morphology, chemical composition, weight percent of the ferrite composite of the toroid sample, magnetic properties, and return loss are investigated using field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and network analyzer. For preparing the absorbing sheet, chlorinated polyethylene (CPE) is used as a polymeric binder. The EM wave absorption properties of the prepared samples were studied at 4 - 8 GHz. We can confirm the effects of the thickness of the samples for absorption properties. An absorption bandwidth of more than a 10-dB return loss shifts toward a lower frequency range along with an increase in the thickness of the absorber.

• 한국전자파학회지:전자파기술
• /
• 제5권2호
• /
• pp.67-78
• /
• 1994

1996년부터 유럽연합을 중심으로 전자파내성(Electromagnetic immunity; 흔히 군사규격에서는 전자파감응성(electromagnetic susceptibility)이라 함) 규제가 본격적으로 시작될 전망이다. 이러한 전자 파내성 규제는 우리가 과거 '80년대 초에 경험했던 전자파방출(electromagnetic emission; 흔히 electro- magnetic interference 라고도 표현한다) 규제에 비해 규제주파수가 대폭 확장됨(9KHz - 1GHz .rarw. 50/60 Hz - 40 GHz)은 물론, 규제항목도 크게 늘어나기(2개 항목 .rarw. 11개 항목)때문에 본격 규제가 시작되면 우리 산업체에 큰 피해를 초래할 것으로 우려된다. 특히 "복사 전자기장에 대한 전자파내성 요구사항"은 일부 전자파내성 측정항목을 포함하고 있던 안전규 격 등에서도 다루고 있지 않던 것으로서 우리에게는 매우 생소한 항목이다. 이 항목은 과거 미국의 군사 규격등에서 요구했던 항목인데, 앞으로 각국의 상용규격에도 대폭 추가될 것으로 보인다. 이러한 규제는 우리의 생활환경에서 결코 빼놓고 생각할 수 없는, 동시에 가장 큰 전자파장해원인 의도적 복사로서의 방 송신호 및 각종 무선통신 신호에 대해 전기, 전자기기가 전자파내성을 갖고, 성능저하나 오동작을 유발하 지 않아야 함을 요구하는 것이다. 이러한 항목의 평가를 위해서는 대형 시험환경(EMS chamber)과 표준 전자기장 발생장치(signal genera- tors + high power amplifiers), 그리고 오동작 모니터링 장치(monitorring equipments) 등이 필요하기 때 문에 평가시스템 구성에 막대한 비용이 소요된다. 따라서 시스템 구성에 매우 신중을 기해야 하며, 관련 국제표준화규격을 사전에 철저히 이해하여 관련 시험검사를 위한 투자계획을 수립하는 것이 바람직하다. 본 고에서는 복사 전자기장에 대한 대표적인 국제표준화규격을 소개하고, 나아가서 그러한 항목의 평가 시스템의 설계 및 구현에 대해서 설명할 것이다.

• Journal of information and communication convergence engineering
• /
• 제14권3호
• /
• pp.184-190
• /
• 2016

We present experimental demonstrations of electromagnetic bandgap (EBG) structures for the wideband suppression of radiated emissions from a power bus in high-speed printed circuit boards (PCBs). In most of the PCB designs, a parallel plate waveguide (PPW) structure is employed for a power bus. This structure significantly produces the wideband-radiated emissions resulting from parallel plate modes. To suppress the parallel plate modes in the wideband frequency range, the power buses based on the electromagnetic bandgap structure with a defected ground structure (DGS) are presented. DGSs are applied to a metal plane that is connected to a rectangular EBG patch by using a via structure. The use of the DGS increases the characteristic impedance value of a unit cell, thereby substantially improving the suppression bandwidth of the radiated emissions. It is experimentally demonstrated that the DGS-EBG structure significantly mitigates the radiated emissions over the frequency range of 0.5 GHz to 2 GHz as compared to the PPW.

• 한국조명전기설비학회지:조명전기설비
• /
• 제9권6호
• /
• pp.23-31
• /
• 1995

As a study on electromagnetic radiation emission from the neon signs, this paper has investigated the characteristics of frequency bands and spectra intensities under the operations of the sign's OFF, ON/OFF and continuous ON states. Also we have studied the above characteristics when a distance between the sign and the antenna is varied. All data were obtained in the range of 0.1∼1,000[MHz] by using spectrum analyzer along with the loop, biconical and log periodic antenna. As the result, we found that the radiated electromagnetic waves of the sign at continuous ON states were measured only in the range of 30∼400[MHz] but those of the sign at ON/OFF states were appeared widely in the range of 2∼1,000[MHz].

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권3호
• /
• pp.248-251
• /
• 2014

As more vehicles become equipped with advanced electronic control systems, more consideration is needed with regards to automotive safety issues related to the effects of electromagnetic waves. Unwanted electromagnetic waves from the antenna, electricity and other electronic devices cause the performance and safety problem of automotive components. In general, Power Integrity and Signal Integrity analysis have been widely used, but these analyses have stayed PCB level. PCB base analysis is different from radiated emission TEST condition so its results are used just for reference. This paper proposes EMC optimization technology using module level 3-dimensional radiation simulation process closed to fundamental test conditions. If module level EMC analysis, which is proposed in this study, is applied to all automotive electronics systems, unexpected EMC noise will be prevented.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.439-445
• /
• 2008

In this paper, the preliminary EMC analysis process between the Communication, Ocean and Meteorological Satellite (COMS) and Geostationary Earth Orbit (GEO) launch vehicles in the frequency range [1MHz-47MHz] is described. The considered launch vehicles are arian V, sea Launch, land Launch, atlas III&V, delta IV, proton M/breeze M, soyuz, HII-A and Angara. The launch vehicle Radiated Emission (RE) specifications have been compared to COMS satellite Radiated Susceptibility (RS) limits. The COMS RS limits are the RS qualification levels of COMS units during launch. As a result, The radiated emission levels of arian V, sea launch, atlas III&V, delta IV, proton M/breeze M, HII-A and angara are compliant with COMS RS limits. The negative margins appear between land launch or soyuz launch vehicle RE and COMS RS. Then, if the land launch or soyuz is chosen by the customer, The tests should be performed at satellite level in order to demonstrate the compatibility with respect to launch vehicles specifications.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.60-63
• /
• 2001

Investigating electromagnetic emissions of inverter power sources for resistance welding existing special aspects of EMI measurements in the field of resistance welding machines resulting from the power rating and intermittent operation mode of these machines have to be taken into account. The characteristics of the internal switching processes determined by the behavior of the applied power semiconductors, snubber circuits and constructional aspects exert a great influence on the conducted emission of resistance welding inverters.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.752-755
• /
• 2003

An EMI emission of 42" AC-PDP panel is studied in this paper. First, the EMI emission level is roughly estimated using both simple electric dipole type and magnetic dipole type radiator model. The value of current required for estimation has been obtained from Fourier Transform of the measured current in time domain. Second, we investigate which type of EMI radiation is dominant by FEM calculation of the wave impedance. The result shows that electric dipole type radiation is dominant EMI source.

• Corrosion Science and Technology
• /
• 제2권6호
• /
• pp.277-282
• /
• 2003

Holographic interferometry, an electromagnetic method, was used to study corrosion of carbon steel, aluminum and copper nickel alloys in NaOH, KCI and $H_2SO_4$ solutions respectively. The technique, called electrochemical emission spectroscopy, consisted of in-situ monitoring of changes in the number of fringe evolutions during the corrosion process. It allowed a detailed picture of anodic dissolution rate changes of alloys. The results were compared to common corrosion measurement methods such as linear polarization resistance measurements and electrochemical impedance spectroscopy. A good agreement between both data was found, thus indicating that holographic interferometry can be a very powerful technique for in-situ corrosion monitoring.

• 천문학회보
• /
• 제44권2호
• /
• pp.70.1-70.1
• /
• 2019

Multiple-harmonic electron cyclotron emissions, often known in the literature as the (n + 1∕2)fce emissions, are a common occurrence in the magnetosphere. These emissions are often interpreted in terms of the Bernstein mode instability driven by the electron loss cone velocity distribution function. Alternatively, they can be interpreted as quasi-thermal emission of electrostatic fluctuations in magnetized plasmas. The present paper carries out a one-dimensional relativistic electromagnetic particle-in-cell simulation and also employs a reduced quasi-linear kinetic theoretical analysis in order to compare against the simulation. It is found that the Bernstein mode instability is indeed excited by the loss cone distribution of electrons, but the saturation level of the electrostatic mode is quite low, and that the effects of instability on the electrons is rather minimal. This supports the interpretation of multiple-harmonic emission in the context of the spontaneous emission and reabsorption in quasi-thermal magnetized plasma in the magnetosphere.