• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.7
• /
• pp.1336-1341
• /
• 2009

In this paper, an EMI reduction effects using an EMC chamber is described and reduction methods is proposed. In the case of general electronic components a working frequency is low. But in this paper the vehicle cluster works 75MHz in the main clock frequency, becoming weak by noise because of being attached in TFT LCD. As the outer case installed in the vehicle is made up of plastic materials, the noise is radiated if not protecting noise in the PCB itself. Therefore, This paper will explain the theoretical basis and propriety with respect to the discussion and need about the guide for PCB design considering EMC, through the reduction of PCB noise.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.340-342
• /
• 2002

본 논문에서는 배전자동화용 스위치 제어장치의 전자기적합(EMC)에 대하여 고찰하였다. 먼저, 자동화용 제어장치의 EMC 성능에 영향을 주는 요인들을 분석하였다. 또한 제어장치 관련 국내외 규격들의 EMC 평가항목 및 기준을 검토하였다. 검토결과 국제규격보다 미흡함을 발견하였다. 검토결과를 바탕으로 국내 규격의 EMC 추가 항목 및 개선방안을 제안하였다.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.343-345
• /
• 2002

본 논문은 전자식 전럭량계의 전자기적합(EMC)에 대하여 고찰하였다. 전력량계 관련 EMC 요인을 IEC 61000-4 시리즈 규격을 중심으로 고찰하였다. 또한 규격별 EMC 성능평가 항목에 대해서도 비교 검토하였다. 검토결과 국내기준은 국제규격보다 미흡함을 발견하였다. 이들을 바탕으로 국내 규격의 EMC 성능평가 개선방안을 제안하였다. 전자식 전력량계 EMC 개선방안을 연구하는데 기초 자료가 되었으면 한다.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.236-244
• /
• 2008

The evolution and application of RFID technologies have been at the forefront of allowing aviation industries to improve the quality of aircraft maintenance and air cargo handling. However, safety problems in airplane operation are arising from the hazards of frequencies transmitted due to RFID systems. Though the intensities of frequencies back-scattered from the tags are very weak, some malfunctions are anticipated due to induction coupling on aircraft wiring. Therefore, safety assessment such as electromagnetic compatability should be accomplished upon aircraft critical and essential equipments before installations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.12
• /
• pp.1207-1215
• /
• 2008

Satellite generates a complex electromagnetic noise by conducted and radiated coupling effect of the various electrical instruments. This noise may cause serious problems on the satellite system. To minimize the electromagnetic coupling effects and maintain the system safety margin, system noise reduction technique should be applied from the beginning of the system design. The COMS system is evaluated by measuring the conducted noise on system electrical power leads at PSR(Power Supply Regulator) and verifying a 6 dB system safety margin under the complex noise environment with current injection. The radiated noise due to the complex transmit antenna configuration is evaluated by integrating all unit-level RE measurement results, and the RF compatibility between spacecraft and launch vehicle is analyzed with the above estimations. This paper describes the COMS EMC compatibility analysis with respect to each unit level EMC test results, and RF compatibility analysis between spacecraft and launch vehicle. The analyzed results will be reflected on FM(Flight Model) EMC test.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.258-264
• /
• 2004

In this paper, MMIC double balanced star mixer for 40 ㎓ was implemented on GaAs substrate with backside vias. In the design of the MMIC mixer, the design of balun and diode was required. A novel balun structure using microstrip to CPS was presented. The 40 ㎓ balun was designed based on the design experience of the scale-down balun by 2 ㎓. The balun may be suitable for fabrication in MMIC process with backside via and can easily be applied for DBM(Double Balanced Mixer). A Schottky diode was designed and implemented using p-HEMT process considering the compatability with other high frequency MMIC's fabricated on p-HEMT base process. Finally, the double balanced star mixer was fabricated using the balun and the p=HEMP Schottky diode. The measured performance of mixer shows 30 ㏈ conversion loss at 18 ㏈m LO power. This insufficient performance is caused by the unwanted diode at AlGaAs junction in vertical structure of p-HEMT. If the p-HEMT's gate is recessed to AlGaAs layer, and so the diode is eliminated, the mixer's performances will be improved.