• 산업경영시스템학회지
• /
• 제22권53호
• /
• pp.69-78
• /
• 1999

We developed an apparatus for odorous stimuli control to record olfactory evoked potentials from human scalp. The characteristics of the apparatus were as follows. 1. Translating the subjects respiration into electric signals with a sensor attached to the nose. The period and timing of odorous stimuli could be adjusted, so that stimuli could be synchronous with respiration. 2. The respirations translated into electric signals were made constant in amplitude by using an auto gain control circuit. 3. The interstimulus interval of odorous could be arbitrarily selected once every 1 to 9 respirations so that adaptation could be prevented. We obtained olfactory - evoked potentials (OEPs) to odorous stimuli using this apparatus from the site of Cz, whose positive peak latencies were approximately $180{\pm}23ms$. Such response were not recorded if oxygen stimuli were used instead of odorous or with click sounds produced by the switching electromagnetic valve.

• 한국철도학회논문집
• /
• 제14권4호
• /
• pp.364-369
• /
• 2011

터널의 안전관리를 위해서는 효과적이고 지속적인 계측이 필요하다. 현재 적용되고 있는 대부분의 계측센서로는 터널의 국부적인 상태만을 파악할 수 있으므로 전체 터널의 안전상태를 파악하기 위해서는 다수의 설치가 필요하다. 철도터널의 경우 일정한 조건의 열차운행이 정기적으로 이루어지므로 터널구조물에 발생하는 진동을 지속적으로 관측하여 분석하면 상대적으로 넓은 범위의 영역에 대하여 터널 손상을 효과적으로 예측할 수 있다. 한편 철도터널 내에는 고전압으로 인한 전자기장의 간섭이 있으므로, 이를 배제할 수 있는 계측센서의 적용이 필요하다. 본 연구에서는 이러한 문제점을 해결하기 위하여 광섬유격자센서를 이용한 가속도계를 개발하였다. 기존 터널의 진동계측 결과를 검토하여 철도터널 진동 계측에 적합한 가속도계의 사양을 결정하였다. 민감도와 측정범위의 향상을 위하여 새로운 구조를 적용한 가속도계를 개발하였으며 실내시험을 통해 그 성능을 검증하였다. 개발된 광섬유 가속도계를 적용하여 고속철도 터널의 상시 진동모니터링 시스템을 구축한 사례를 소개하였으며, 열차운행에 의하여 발생하는 진동 측정 결과를 통해 개발된 가속도계의 유효성을 제시하였다.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.297-303
• /
• 2012

본 논문에서는 다중대역 렉테나가 장착된 RF 에너지 수집 시스템의 성능 확인에 사용되는 광대역 이중리지 혼 안테나를 다중모드 회로망 분석을 이용하여 효율적으로 설계하는 방법을 제안하고 있다. 다중모드 회로망 분석을 이용하여 천이장치와 혼에 대한 각각의 고차모드 산란 파라미터를 얻어 설계에 적용하였다. 그 결과 기존 방법에 비해 계산시간이 많이 단축되었으며 안테나의 정재파비를 계산한 결과 전자기장 해석을 적용한 것과 거의 유사하였으며, 측정치와 높은 일치도를 보였다. 설계된 광대역 혼 안테나는 660~6360 MHz 대역폭과 6~13.7 dBi의 최대 방사 이득을 가진다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.577-587
• /
• 2004

A coaxial pulsed plasma thruster (PPT) with a Teflon cavity was designed, and its performance characteristics were examined varying stored energy, cavity length and capacitance. The PPT was tested as the entire system including the discharge circuit, and the results were explained with both the transfer efficiency and the acceleration efficiency. The transfer efficiency is defined as the fraction of energy in capacitors supplied into plasma, and the acceleration efficiency as the fraction of energy supplied into plasma converted to thrust energy. To estimate these efficiencies, the equivalent plasma resistance was defined and calculated using energy conservation during discharge. The equivalent plasma resistance proportionally increased with cavity length, and therefore the current peak increased with decreasing cavity length. The energy density calculated by the transfer efficiency was increased with decreasing cavity length. As a result, higher acceleration efficiency and lower transfer efficiency were obtained with shorter cavity length. Accordingly, there was an optimal cavity length for the thrust efficiency. The specific impulse and the impulse bit per unit stored energy ranged from 390 s and 50 $\mu$ Ns/J for a cavity length of 34 mm to 825 s and 11 $\mu$ Ns/J for a cavity length of 4 mm when the stored energy was fixed to 21.4J. Thus, it was showed that the performance of this PPT approached that of electromagnetic-acceleration-type PPT with decreasing cavity length. The PPT achieved thrust efficiencies of 10-12% at 21.4 J and 6-7% at 5.35 J at cavity lengths between 14 mm and 29 mm.

• 한국지능시스템학회논문지
• /
• 제17권4호
• /
• pp.506-510
• /
• 2007

전자나침반(DMC)은 실내의 전자기적 요소나 강한 자성체 건물구조에서는 쉽게 방해를 받던 나침반보다 실내에서 간섭에 강한 특징을 가지고 있다. 그리고 초음파 센서는 물체와의 거리를 계산해 줄뿐만 아니라 값싼 센서로서 경제적인 이점을 가지고 있어 Simultaneous Localization and Mapping(SLAM)에서 많이 사용하고 있다. 본 논문에서는 자율 이동 로봇의 구동에서 전자나침반과 초음파 센서를 이용한 SLAM의 구현에 대해 연구하였다. 로봇의 특성상 한정된 센싱 데이터만으로 방향과 위치를 파악하고 그 데이터 값으로 가능한 빠르게 위치 측정을 하여야 한다. 그러므로 자율 이동 로봇에서의 SLAM 적용함으로 위치측정의 구현과 지도 작성을 수행한다. 그리고 SLAM 구현상의 주된 연구 중의 하나인 Kid Napping 문제에 중점을 두고 연구한다. 특히, 위치 측정의 구현을 수행하기 위한 데이터의 센싱 방법으로 초음파 센서를 사용하였고 비슷한 위치의 데이터 값이 주어지거나 사전 정보 없는 상태에서는 로봇의 상태를 파악하기 위해서 전자 나침반을 사용하였다. 그래서 자율 이동 로봇의 위치를 정확하게 측정하기 위해서 활용하였다.

• 한국통신학회논문지
• /
• 제41권6호
• /
• pp.611-619
• /
• 2016

현대전에서의 전자전은 전쟁에 있어서 승패를 좌우한다. 따라서 적의 미상 레이더에서 방사하는 전자파를 수신하여 신호 처리 후 레이더의 변조방식을 식별하는 일은 전자전에서 중요한 핵심 과제이다. 본 논문에서는 최근 전자전 보호능력이 우수한 Linear Up Sliding PRI, Non-Linear Up Sliding PRI 방식과 Linear Down Sliding PRI, Non-Linear Down Sliding PRI 방식을 자동 식별하는 알고리즘을 TDOA(Time Difference Of Arrival) 개념을 적용하여 개발하였다. 안테나로 입력되는 레이더 펄스마다 각 제원을 산출하고 제원 중에서 펄스반복간격의 PRI값으로부터 시간차의 특성을 산출하여 식별 알고리즘을 개발하였다. 알고리즘을 프로그래밍한 후 표본 PRI데이터 를 입력하여 처리한 결과, 모두 정확히 PRI변조방식을 식별하였다. 개발된 알고리즘은 향후 ES(ESM, ELINT)장비에 적용 가능할 것으로 판단한다.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1251-1264
• /
• 2018

The systematic and effective design method of a Class-D current-source resonant inverter for use in an induction cooker with zero-ripple line current is presented. The design procedure is based on the principle of the Class-D current-source resonant inverter with a simplified load network model that is a parallel equivalent circuit. An induction load characterization is obtained from a large-signal excitation test-bench based on parallel load network, which is the key to an accurate design for the induction cooker system. Accordingly, the proposed scheme provides a systematic, precise, and feasible solution than the existing design method based on series-parallel load network under low-signal excitation. Moreover, a zero-ripple condition of utility-line input current is naturally preserved without any extra circuit or control. Meanwhile, a differential-mode input electromagnetic interference (EMI) filter can be eliminated, high power quality in utility-line can be obtained, and a standard-recovery diode of bridge-rectifier can be employed. The step-by-step design procedure explained with design example. The devices stress and power loss analysis of induction cooker with a parallel load network under large-signal excitation are described. A 2,500-W laboratory prototype was developed for $220-V_{rms}/50-Hz$ utility-line to verify the theoretical analysis. An efficiency of the prototype is 96% at full load.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.261-261
• /
• 2007

Wearable and ubiquitous micro systems will be greatly growing and their related devices should be self-powered in order to avoid the replacement of finite power sources, for example, by scavenging energy from the environment. With ever reducing power requirements of both analog and digital circuits, power scavenging approaches are becoming increasingly realistic. One approach is to drive an electromechanical converter from ambient motion or vibration. Vibration-driven generators based on electromagnetic, electrostatic and piezoelectric technologies have been demonstrated. Among various generator types proposed so far, piezoelectric generator possesses considerable potential in micro system. To overcome low mechanical-to- electric energy conversion, the piezoelectric device should activate in resonance mode in response to external vibration. Normally, the external vibration excretes at low frequency ranging 0.1 to 200 Hz, whereas the resonant frequencies of the devices are fixed as constant. Therefore, keeping their resonant mode in varying external vibration can be one of important points in enhancing the conversion efficiency. We investigated the possibility of use of multi-bender type piezoelectric devices. To match the external vibration frequency with the device resonant frequency, the various devices with different resonant frequency were chosen. Under an external vibration acceleration of 0.1G at 120 Hz, the device exhibited a peak-to-peak voltage of 2.8 V and a power of 0.5 mw in resonance mode.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.79-94
• /
• 2005

Because the golf swing is very complex movement, it is varied in different gender, skill level, and club. This study measured kinematic variables in golf swing regarding gender, skill level, and club types using FasTrak electromagnetic tracking system. Golf swing kinematics including time variables, linear and angular displacement variables, angular velocity variables were analyzed and compared through three-way ANOVA The results were as follows: 1. In time variables, Female and driver showed longer backswing time than male and iron. Downswing time was longer in female and nonexperts than male and experts. Backswing time over downswing time was longer in experts than nonexperts. Uncocking time was longer in male and experts than female and nonexperts. The differences were statistically significant (p<.05). 2. In displacement variables, Female and nonexperts showed greater backswing head lift than male and experts. Impact head lift was greater in female, nonexperts, and iron than male, experts, and driver. The differences were statistically significant (p<.05). Experts and driver showed greater top hip rotation angle than nonexperts and iron. Top shoulder rotation angle was greater in male, experts and driver than female, nonexperts, and iron. X-factor was greater in male, experts, and driver than female, nonexperts, and iron. Male and experts showed greater backswing hip sway than female and nonexperts. Impact hip sway was greater in male and iron than female and driver. The differences were statistically significant (p<.05). 3. In velocity variables, Experts displayed higher impact hip rotation velocity than nonexperts. Impact shoulder rotation velocity was greater in male and iron than female and driver (p<.05).

• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.164-169
• /
• 2020

Use of SiPM has been considered as an alternative to PMT, because of its compact size, low-operating voltage, non-sensitive to electromagnetic, low costs and so on. The main limitation for the use of SiPM is due to its small sensitive area compared to PMT that limits the light collection, and therefore the sensor energy resolution. In this article we studied the effect of increasing the number of SiPM by connecting them in parallel to increase the active detection area. This allowed us to compare the different energy resolution measurements. ¹³⁷Cs has been selected as reference to study the energy resolution for 662 keV gamma-rays. Another investigation was to compare the minimum detectable gamma energy under various SiPM configurations. It has been found that the use of 4 SiPM arrays can greatly improve the energy resolution up to 4% than only one SiPM array, meanwhile use of more than 2 SiPM arrays does not increase the energy resolution significantly. Thus we can conclude that for a large area of cylindrical scintillator (3 × 3 inches), the use of SiPMs are limited to a certain number or certai active area depending on the commercial SiPMs, and its cost should be less than traditional PMT for the cost-effective and compact size considerations. It is well known that the gain of SiPM varies with temperature. In this article, we also calibrated gain to guarantee the same position of photoelectric peak in response of different temperatures.