• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.227-232
• /
• 2003

As the most precision equipment requiring very strict vibration environment are vulnerable to the surrounding vibration condition, they adapt the passive or active vibration isolation system. When it comes to the passive isolation system, the resonance of the isolation system causes excessive resonance response, and finally results in the degrade the equipment performance. This paper deals with the active control method to control this resonance induced response, and includes the experiment on the active control for controlling the resonance response on the table against the excitation of the same frequency with the natural frequency of the isolation system. The electromagnetic actuator was designed and the control effect was verified by the experiment. The experiment showed that the electromagnetic actuator is effective for controlling the low frequency isolation resonance response of the precision equipment.

• 한국전자파학회논문지
• /
• 제13권1호
• /
• pp.87-93
• /
• 2002

기존의 공진산란이론에서는 하나의 모드에 대한 부분파 산란장이 주파수에 대하여 급격히 변하는 공진성분과 서서히 변하는 배경성분의 합으로 이루어졌다고 가정하고 적당한 배경성분을 제거하여 공진성분을 추출했다. 최근에 음향학 분야에서 산란 5-함수의 곱셈전개에 근거를 둔 새로운 공진 산란이론이 개발되어 왔다. 산란장이 공진성분과 배경성분 이외에 이들의 상호간섭성분으로 구성되어 있다고 제안한 이 이론은 공진성분의 크기뿐만 아니라 위상스펙트럼을 정확하게 얻게 해 주었다. 전자기파 분야에서는 유전체로 코팅된 도체 구 혹은 원통의 산란문제에 이 이론이 성공적으로 적용되었다. 본 논문에서는 유전체 실린더의 전자기파의 산란문제로 이 이론을 확장하고 수치계산으로 그 유효성을 검증했다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
• /
• pp.332-336
• /
• 2001

The new RST is recently developed by the product expansion of the scattering functions in the field of acoustics. The new formulation suggests that the scattering coefficients consist of resonance, non-resonance, and their interactional components. In the scattering problems of acoustic waves, the moduli and phase of the resonance coefficient are obtained the appropriate results through the new RST. In our recent works the new RST was successfully applied to the scattering problem of electromagnetic waves for coated conducting cylinder and sphere. In this paper, the new RST is applied to the 2-dimensional scattering problem of electromagnetic waves for a homogeneous dielectric cylinder, and the numerical results are compared with the previous RST.

• 전자공학회논문지A
• /
• 제28A권12호
• /
• pp.19-23
• /
• 1991

A method for suppressing unwanted resonance modes by attaching an electromagnetic wave absorber onto a metal case was studied to prevent performance deterioration of electronic devices. The electromagnetic wave absorber fabricated for this study had an attenuation characteristics above 20dB in the frequency band from 450MHz, 1150MHz. A rectangular cavity resonator whose resonance frequencies of TE$_{101}$, TE$_{102}$ modes were 900MHz, 1250MHz, respectively, was made to measure attenuation for the electromagnetic wave absorber-metal assembly. The result showed that the resonance mode for high attenuation was sensitive to the location of electromagnetic wave absorber, and the attenuation characteristics above 20dB could be obtained when electromagnetic wave absorber was properly positioned.

• 비파괴검사학회지
• /
• 제33권1호
• /
• pp.7-13
• /
• 2013

철강 생산 제품 중 강선 (steel wire rod)은 제조 과정 중 종방향으로 미세한 표면 결함이 매우 빈번하게 발생하는데 이중 깊이가 수 십 마이크로미터 이상인 결함들은 최종 생산품의 불량을 유발하는 심각한 원인이 되고 있다. 이와 같은 이유로 강선의 제조 단계에서 표면의 미세 결함의 깊이를 평가하는 방법의 개발이 절실히 요구된다. 표면 미세 결함을 평가할 수 있는 여러 가지 방법 중에서, 본 연구에서는, 전자기 음향공진법의 적용 가능성을 고찰하고자 한다. 전자기 음향 공진 (electromagnetic acoustic resonance, EMAR)은 전자기 음향 트랜스듀서 (electromagnetic acoustic transducer, EMAT)을 이용하여 시편의 공진 특성을 측정하는 방법으로서, 대상의 작은 변화에도 민감하게 반응하고 비접촉 측정이 가능하여 현장 적용에 용이하다는 장점이 있다. 전자기 음향 공진 실험을 통하여 표면 미세결함과 잔향특성의 변화를 관찰하여 깊이 약 100 마이크로미터 내외의 결함은 탐상 가능함을 확인하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.389-393
• /
• 2014

This paper presents one of the methods for design to reduce the noise and vibration of 200kW motor for electric propulsion ship. One of the important factors affecting vibration of the motor is the resonance. The natural frequency and natural mode of the 200kW motor is analyzed by using FEM tool and impact test equipment to avoid the resonance. Also, compare FEM result with impact test result to make a reliable FE model of 200kW motor. In order to find out the effect of the noise and vibration of the motor by electromagnetic excitation force, conduct electromagnetic-structure coupled analysis. These characteristics are much useful to design 200kW motor for electric propulsion ship.

• Journal of electromagnetic engineering and science
• /
• 제15권1호
• /
• pp.26-30
• /
• 2015

In this paper, a simple equivalent circuit model for a defected ground structure (DGS) microstrip line with stepped impedance slot-lines in the ground plane is presented. In addition, an analytic expression for the resonance frequency of the proposed structure is derived. In equivalent circuit modeling, the capacitance and the inductance of the resonance circuit are evaluated from the dimensions of the etched pattern in the ground plane. The resonance frequencies calculated from the proposed method are compared with those obtained with an electromagnetic (EM) simulation.

• Journal of electromagnetic engineering and science
• /
• 제18권1호
• /
• pp.1-6
• /
• 2018

In this study, the analytic expression for the positive/negative $n^{th}-Mode$ resonance frequency of an N unit cell composite right-/lefthanded (CRLH) transmission line is derived. To explain the resonance mechanism of the $n^{th}$ mode, especially for the negative mode, the current distribution of the N unit cell CRLH transmission line is investigated with a circuit simulation. Results show that both positive and negative $n^{th}$ resonance modes have n times current variations, but their phase difference is $180^{\circ}$ as expected. Moreover, the positive $n^{th}$ resonance occurs at a high frequency, whereas the negative $n^{th}$ resonance transpires at a low frequency, thus indicating that the negative resonance mode can be utilized for a small resonator. The correlation between the slope of the dispersion curve and the bandwidth is also observed. In sum, the balanced condition of the CRLH transmission line provides a broader bandwidth than the unbalanced condition.

• Journal of electromagnetic engineering and science
• /
• 제11권3호
• /
• pp.166-173
• /
• 2011

In this paper, we implemented and analyzed a wireless power transfer (WPT) system with a CSPR topology. CSPR refers to constant current source, series resonance circuit topology of a transmitting coil, parallel resonance circuit topology of a receiving coil, and pure resistive loading. The transmitting coil is coupled by a magnetic field to the receiving coil without wire. Although the electromotive force (emf) is small (about 4.5V), the voltage on load resistor is 148V, because a parallel resonance scheme was adopted for the receiving coil. The implemented WPT system is designed to be able to transfer up to 1 kW power and can operate a LED TV. Before the implementation, the EMF reduction mechanism based on the use of ferrite and a metal shield box was confirmed by an EM simulation and we found that the EMF can be suppressed dramatically by using this shield. The operating frequency of the implemented WPT system is 30.7kHz and the air gap between two coils is 150mm. The power transferred to the load resistor is 147W and the real power transfer efficiency is 66.4 %.

• 한국전자파학회논문지
• /
• 제21권10호
• /
• pp.1094-1102
• /
• 2010

본 논문에서는 두께가 유한한 도체 스크린 내부 캐비티의 슬릿을 통한 전자파 투과 문제를 슬릿 축에 대해 TE 편파된 평면파가 도체 스크린의 슬릿에 입사되는 경우에 대해 고려하였다. 모멘트 방법을 이용하여 슬릿을 통해 투과된 전력을 구하고, 슬릿의 등가 어드미턴스로부터 구성된 등가 회로 방법을 이용하여 계산된 것과 비교하였다. 공진조건 하에서 좁은 슬릿의 유효 슬릿 폭은 실제 슬릿 폭에 무관하게 $1/{\pi}$ 파장이 됨이 확인되었다. 제안된 구조에서의 공진 투과 현상을 캐비티 내부 슬릿의 등가 어드미턴스 변화와 관련하여 설명하였다.