• Journal of Magnetics
• /
• 제22권2호
• /
• pp.203-213
• /
• 2017

Magnetically suspended control & sensitive gyroscope (MSCSG) is a novel type of gyroscope with the integration of attitude control and attitude angular measurement. To improve the precision and reduce the power consumption of Lorentz Force-type Magnetic Bearing (LFMB), the air gap flux density distribution of LFMB has been studied. The uniformity of air gap flux density is defined to qualify the uniform degree of the air gap flux density distribution. Considering the consumption, the average value of flux density is defined as well. Some optimal designs and analyses of LFMB are carried out by finite element simulation. The strength of the permanent magnet is taken into consideration during the machining process. To verify the design and simulation, a high-precision instrument is employed to measure the 3-dimensional magnetic flux density of LFMB. After measurement and calculation, the uniform degree of magnetic flux density distribution reaches 0.978 and the average value of the flux density is 0.482T. Experimental results show that the optimal design is effective and some useful advice can be obtained for further research.

• 항공우주시스템공학회지
• /
• 제12권3호
• /
• pp.64-69
• /
• 2018

고속 전자기 성형 (EMF) 과정은 로렌츠 힘과 자기장의 에너지를 기반으로 한다. EMF의 장점은 향상된 성형성, 주름 감소 및 비접촉 성형 등이 있다. 본 연구에서는 전자기 성형을 통한 알루미늄 파이프의 온도에 따른 성형성을 분석하기 위해 전자기-구조 연동해석을 수행하였으며, 온도가 증가함에 따라 전기저항이 커지므로 인해 자속 밀도는 감소하고, 응력-변형률 곡선에서 온도가 높아질수록 유동 응력이 낮아지므로 변형량은 상대적으로 증가함을 확인할 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.375-376
• /
• 2012

• Coupled systems mechanics
• /
• 제6권2호
• /
• pp.113-125
• /
• 2017

This paper proposes the idea to enhance the heat transfer in Gas Tungsten Arc Welding (GTAW) by using the azimuthal magnetic field. The azimuthal magnetic field generated by the external currents makes the Lorentz force stronger, and consequently improves the heat transfer by the faster flow movement. The enhanced heat transfer might improve the welding performance by increasing the temperature at the workpiece. To validate the proposed idea, a two-dimensional axi-symmetric model of GTAW is built, and the multiphysics simulation of GTAW is carried out. As the analysis result, the distributions of electric current, electromagnetic fields, arc flow velocity, and temperature are investigated. Then, the proposed idea for heat transfer enhancement is validated by comparing the Lorentz force, flow velocity, and temperature distribution with and without azimuthal magnetic fields.

• 대한기계학회논문집A
• /
• 제29권12권
• /
• pp.1567-1573
• /
• 2005

This paper introduces a new active magnetic bearing(AMB) that can provide both radial and axial control functions in one bearing unit without axial disk. It has a structure of double four-pole AMB or a four-pole AMB where each core is split into two axially. The cores have two kinds of coil winding; they independently generate fluxes on the planes perpendicular or parallel to the shaft. For the radial control action, it works just like a conventional four-pole AMB. Meanwhile, for the axial control, it uses the Lorentz force generated by the interaction of the bias flux for radial control and the axial control flux. In this paper, the proposed structure, principle, and design process based on magnetic flux analysis are introduced, and its feasibility is experimentally verified by using a simple PD control algorithm with a feedforward loop to compensate the coupled flux effect.

• 대한기계학회논문집A
• /
• 제29권12권
• /
• pp.1561-1566
• /
• 2005

In this paper, a new compact active magnetic bearing(AMB) is proposed in which radial and axial bearings are integrated in one bearing unit. It consists of four U-shaped cores circumferentially connected by yokes and two-layer coils for radial and axial controls. For the radial control action, it has the same principle as conventional homopolar AMBs, while for the axial control, it uses the Lorentz force generated by the interaction of the bias flux for radial control and the axial control flux. The proposed structure makes it easy to design a compact AMB because it has no disk for axial control. This paper introduces the proposed structure, principle, and design process based on the magnetic flux analysis. By using a control algorithm with feedforward action to compensate the coupled flux effect, the feasibility of the proposed AMB is experimentally verified.

• 한국생산제조학회지
• /
• 제7권2호
• /
• pp.9-14
• /
• 1998

One of the areas in the continuous casting process that up to this point, has not been definitively instrumented is a method of reliably locating the part of a continuously cast strand that remains liquid for a period after the outer portion has solidified. To solve the problem. Electromagnetic Trandsducers(EMAT) which operate across an air gap without the need for a coupling medium has been developed. The system was designed to employ a through transmission technique which enhanced the signal-to-noise ratio. The Al 75$\times$75mm and 75$\times$100mm simulators with 2, 4, 8, 16, 32 mm hole respectively has been produced in order to verify the developed EMAT system and to measure to liquid core in continuous casting strand. The system developed can be employed for the optimization of torch cutting speed and for the final cut length of the bloom as well as calculation of average bloom temperature.

• 대한기계학회논문집A
• /
• 제34권8호
• /
• pp.1119-1127
• /
• 2010

본 논문에서는 작동 평면상의 네 위치에서 사중안정점을 가지는 신개념 전자기형 마이크로 액추에이터의 구조체와 전자기 로렌츠력을 이용하는 구동 방식을 제시하고, 이의 타당성을 비선형 구조해석 및 전기-열해석을 통하여 검증하였다. 사중안정성 액추에이터의 구현을 위해서 관련 분야에서 널리 연구되고 있는 쌍안정성 액추에 이터의 개념을 확장 응용하였다. 비선형 유한요소해석을 이용하여 사중안정성 미소 구조체의 정적 해석과 과도동 적 해석을 수행함으로써 액추에이터 구조체의 다중안정성 유무를 파악하고 이 결과를 분석하여 구조체 설계에 반영하였다. 사중안정성 미소 구조체를 도체화하여 자기장 내에서 구조체에 전류를 통할 때에 발생하는 로렌츠력으로 평면상의 네 안정점으로 구조체를 구동할 수 있도록 고안하고, 그 때 필요한 구동전류의 크기 및 전자기 구동에 의한 주울열에 의한 온도분포를 계산하여 전반적인 타당성을 검토하였다. 본 논문은 지금까지의 관심 대상인 쌍안정성의 이용이 아니라 더욱 확장된 다중안정성을 가진 미소 액추에이터의 구조체와 전자기 구동방법을 제안하여 향후에 다중안정성을 필요로 하는 마이크로 시스템에 활용될 수 있도록 하는데 그 의미가 있다.

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1341-1349
• /
• 2001

In this paper, 3 D.O.F. actuator, which has three degrees of freedom in one joint, is proposed. The proposed 3 D.O.F. spherical actuator is composed of the rotor and atator. The upper plate of the stator supports the rotor and five electromagnets are located at the base of the stator. The rotor has two permanent magnets, and each rotational axis of the rotor gimbal system is supported by the bearing. To find out the governing equations for the torque generation, Coulombs law and Lorentz force with respect to magnetism is applied. As the experimental results, if the distance between electromagnet and permanent maget is far enough, the force between these magnets can be expressed from current of coils and z-axial distance. For the purpose of control 3 D.O.F. actuator, PID control law is applied. The experimental results are presented to show the validity of the proposed 3 D.O.F. actuator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.141-143
• /
• 2007

This paper presents the MHD characteristics of the liquid metal flow. The electromagnetic force was calculated by the equivalent circuit method. This Lorentz force was used as a source term for the fluid flow equations. The modified Navier-Stokes equation was solved to give the velocity distributions of the liquid metal flow.