• 항공우주기술
• /
• 제8권1호
• /
• pp.138-143
• /
• 2009

액체로켓엔진 연소기에 적용된 대기 플라즈마 코팅 및 전해/무전해 도금 코팅의 열차폐 효율과 내구성 평가를 수행하였다. 연소시험 결과 대기 플라즈마 방식의 $ZrO_2$, NiCrAlY 코팅은 로켓엔진 연소기의 초음속 유동영역에서 코팅이 표면에서 박리되는 현상이 간헐적으로 발생하였으며 따라서 이러한 문제를 극복할 수 있는 대체 코팅 방식이 요구되었다. 시험 결과 열차폐 효율 및 내구성 관점에서 대기 플라즈마 방식의 $ZrO_2$, NiCrAlY 코팅의 대안으로 무전해/전해 방식을 사용한 니켈-크롬 코팅을 사용할 수 있음을 알 수 있었다.

• 한국표면공학회지
• /
• 제41권6호
• /
• pp.312-324
• /
• 2008

In this study, the functional property as a super abrasive material was secured for CBN powder by the electroless Ni-P plating on the surface of the particle. The plating solution has been prepared to control the surface morphology by regulating surfactants and process conditions. The effects of processing parameters on the surface morphology of CBN powder was discussed. The results are summarized as follows; A stable plating tendency was achieved from 1 hour after quantitatively dropping reducing agent. It was observed that more than 50% of the weight gain was obtained by Ni-P coating on the surface of CBN super abrasive powder. The morphology of the Ni-P coating layer is consisted of botryoidal and spiky type and it could be controlled by regulating processing parameters. Superior characteristic in terms of surface morphology was found in the nonionic surfactant XL-80N. It was found that XL-80N considerably decreased surface tension of CBN powder and Ni-P alloy surface then enhance wettability as well as plating rate. Metal coated CBN powder as a raw material of resin bond wheel has been developed through this investigation.

• 대한금속재료학회지
• /
• 제47권10호
• /
• pp.675-680
• /
• 2009

Effects of $85^{\circ}C/85%$ Temperature/Humidity (T/H) treatment conditions on the peel strength of an electroless-plated Ni/polyimide system were investigated from a $180^{\circ}$ peel test. Peel strength between electroless-plated Ni and polyimide monotonically decreased from $37.4{\pm}5.6g/mm$ to $22.0{\pm}2.7g/mm$ for variation of T/H treatment time from 0 to 1000 hrs. The interfacial bonding mechanism between Ni and polyimide appears to be closely related to Ni-O bonding at the Ni/polyimide interface. The decrease in peel strength due to T/H treatment appears to be related to polyimide degradation due to moisture penetration through the interface and the bulk polyimide itself.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.230-234
• /
• 2009

It is significant technique to increase competitiveness that solar cells have a high energy conversion efficiency and cost effectiveness. When making high efficiency crystalline Si solar cells, evaporated Ti/Pd/Ag contact system is widely used in order to reduce the electrical resistance of the contact fingers. However, the evaporation process is no applicable to mass production because high vacuum is needed. Furthermore, those metals are too expensive to be applied for terrestrial applications. Ni/Cu/Ag contact system of silicon solar cells offers a relatively inexpensive method of making electrical contact. Ni silicide formation is one of the indispensable techniques for Ni/Cu/Ag contact sytem. Ni was electroless plated on the front grid pattern, After Ni electroless plating, the cells were annealed by RTP(Rapid Thermal Process). Ni silicide(NiSi) has certain advantages over Ti silicide($TiSi_2$), lower temperature anneal, one step anneal, low resistivity, low silicon consumption, low film stress, absence of reaction between the annealing ambient. Ni/Cu/Ag metallization scheme is an important process in the direction of cost reduction for solar cells of high efficiency. In this article we shall report an investigation of rapid thermal silicidation of nickel on silngle crystalline silicon wafers in the annealing range of $350-390^{\circ}C$. The samples annealed at temperatures from 350 to $390^{\circ}C$ have been analyzed by SEM(Scanning Electron Microscopy).

• 공업화학
• /
• 제24권4호
• /
• pp.438-442
• /
• 2013

본 연구에서는 무전해 도금법으로 니켈과 인을 탄소섬유 표면에 코팅한 후, 열처리시키는 과정에서 일어나는 변화를 다양한 분석방법을 이용하여 연구하였다. 전자현미경(Scanning Electron Microscopy, SEM)을 이용한 연구에서는, 코팅 후 추가적인 열처리를 하지 않은 경우 평평한 표면구조를 관찰하였으나, 열처리 온도가 $350^{\circ}C$에 이르면서 다공성구조가 생성됨을 알았다. 열처리 온도를 $50^{\circ}C$ 간격으로 증가시키면서 연구한 결과 $650^{\circ}C$까지는 열처리 온도가 증가할수록 기공의 크기는 증가하고, 개수는 감소하는 경향성이 관찰되었다. X-선 회절법(x-ray diffraction, XRD) 측정 결과, 코팅 후 추가 열처리가 없는 경우 금속성 Ni, Ni-P 화합물이 관찰되었으며, 열처리 온도가 증가함에 따라 NiO 봉우리는 세기가 증가하며, 금속성 Ni 봉우리의 세기는 감소하였다. X-선 광전자 분광법(X-ray Photoelectron Spectroscopy, XPS) 측정에서는 $650^{\circ}C$, $700^{\circ}C$의 열처리 후 인 산화물이 표면에서 검출됨을 확인하였는데, 이는 코팅된 니켈 필름의 내부에 존재하던 인 화합물이 열처리 온도가 증가함에 따라서 표면 밖으로 빠져 나오는 현상이 일어나는 결과로 해석할 수 있다. 이상의 분석 데이터를 토대로, 무전해 도금으로 코팅된 Ni-P 화합물($Ni_xP_y$)이 열처리 과정에서 산화되면서, 이때 생성된 인 화합물 기체가 승화하면서 필름에 기공을 생성시키는 것으로 제안할 수 있다. 다공성 물질은 넓은 비표면적 등의 우수한 물성때문에 불균일 촉매 등 다양한 분야에 적용될 수 있으며, 본 연구에서 소개하는 다공성 니켈 필름의 제작법은 대량 생산에 적용이 쉬워 환경 필터 분야 등의 다양한 곳에 응용될 수 있을 것으로 생각된다.

• 마이크로전자및패키징학회지
• /
• 제21권3호
• /
• pp.43-50
• /
• 2014

전자 제품의 경박 단소화 및 고집적화가 이루어 지면서 실리콘 집과 인쇄회로기판의 인터커넥션의 고신뢰도가 요구되고 있다. 본 연구는 Sn-4.0wt%Ag-0.5wt%Cu (SAC405) 솔더와 다양한 무전해 Ni-P 도금 두께에서의 high speed shear 에너지 및 파괴 모드를 연구하였다. 파괴 모드 분석을 위하여 집속이온빔(FIB) 분석이 이용되었다. 질산 기상 처리하지 않은 $1{\mu}m$ Ni-P 시편에서 낮은 shear 에너지가 나왔으며, 이는 솔더레지스트 선단에서 파단의 원인을 제공하는 것이 확인되었다. 질산 기상 처리한 시편에서 무전해 Ni-P 도금 두께가 커질수록 취성 파괴 모드는 감소한다. 또 Ni-P 도금 두께와 표면 거칠기(Ra)는 반비례 관계를 가진다. 이는 Ni-P 도금의 표면 거칠기를 낮추면 SAC405 솔더 조인트의 신뢰도를 향상시킨다는 사실을 나타낸다.

• Corrosion Science and Technology
• /
• 제3권1호
• /
• pp.26-29
• /
• 2004

Metal plated plastics are becoming more prevalent in materials of communication parts. A new technique MmSH is a process of injecting plastics to produce innovated physical properties compared to the conventional injection process. This study involves two ways of coating plastics Ni by electroless plating and varying bath and plasma treatment for improved adhesion strength between plating layer and surface. MmSH injection processed ASS with plasma treated after neutralization showed a superior adhesion force and a gloss and rate of deposition when it was in pH 7.5. On the other hand, conventional injection processed ASS was in pH 6.5.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 The IMAPS-Korea Workshop 2001 Emerging Technology on packaging
• /
• pp.95-99
• /
• 2001

Cu is considered as a promising alternative interconnection material to Al-based interconnection materials in Si-based integrated circuits due to its low resistivity and superior resistance to the electromigration. New humping and UBM material systems for solder flip chip interconnection of Cu pads were investigated using electroless-plated copper (E-Cu) and electroless-plated nickel (E-Ni) plating methods as low cost alternatives. Optimally designed E-Ni/E-Cu UBM bilayer material system can be used not only as UBMs for solder bumps but also as bump itself. Electroless-plated E-Ni/E-Cu bumps assembled using anisotropic conductive adhesives on an organic substrate is successfully demonstrated and characterized in this study

• 한국레이저가공학회지
• /
• 제3권2호
• /
• pp.25-33
• /
• 2000

One of perspective direction of microfabrication is direct laser writing technology that allows to create metal, semiconductive and dielectric micropatterns on substrate surface. In this work, a two step method, the combination of seed forming process, in which metallic Al seed was selectively generated on AlN ceramic substrate by direct writing technique using a pulsed Nd : YAG laser and subsequent electroless Ni plating on the activated Al seed, was presented. The effects of laser parameters such as pulse energy, scanning speed and pulse frequency on shape of Alseed and conductor line after electroless Ni plating were investigated. The nature of the laser activated surface is analyzed from XPS data. The line width of this metallic Al and Ni is analyzed using SEM. As a results, Al seed line with 24㎛ width and 100㎛ isolated line space is obtained. Finally, laser direct writing can be applied in the field between thin and thick film technique in electronic industry.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.109-114
• /
• 2002

The adhesion of electroless plated Ni layer on Al/Si substrates has been investigated. The zincating treatment was conducted with a conventional method and a modified method. In a modified method, ultrasonic agitation was applied during zincating. Adhesion strength was evaluated by a pull-off test. The ultrasonic agitation during zincating increased the nucleation density of Zn particles and refined Zn particle size. the adhesion strength of electroless Ni layer deposited on the modified zincated surface was higher than that on the conventionally zincated surface. the improvement of adhesion was attributed to the fine and dense Zn particles.