• 한국정밀공학회지
• /
• 제17권10호
• /
• pp.125-131
• /
• 2000

By using the test of signal error, model structure of an electrohydraulic servo system is determined. For determining parameter of the electrohydraulic servo system, using time discrete model of parametric method, parameters in time discrete model are searched by the least square method. By bilinear transform, we have found the model of electrohydraulic servo system in s domain. Afterwards, we have compared experimental data with simulation data by MATLAB having the identified parameter. As the result, experimental data is agreed with simulation data very well.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.405-410
• /
• 1999

Hydraulic pipeline between servo valve and actuator affect the dynamic characteristics of electrohydraulic servo systems in serveral ways. This paper deal with the speed control of oil hydraulic gear motor using electrohydraulic servo valve. The frequency and transient response of electrohydraulic servo valve coupled to a gear motor is anlayzed. In particular, the effect of short and long hydraulic pipelines between servo valve and gear motor is investigated. The dynamic characteristics of the speed control systems of gear motor with short pipeline is first described via frequency response experiments with small signal linearized analysis. Loner pipeline is applied distributed parameter pipeline model with consideration of frequency dependent viscous friction.

• 한국자동차공학회논문집
• /
• 제25권2호
• /
• pp.236-241
• /
• 2017

Electrohydraulic forming is a high-speed forming process that deforms a blank using electric discharge in liquid. When high voltage is discharged in the water, a shock wave is propagated from the tip of the electrodes to the blank, causing the blank to be deformed into the die. Electrohydraulic forming has many advantages including improved formability and reduced bouncing effect and springback. The objective of this paper was to conduct a feasibility study to identify the electrohydraulic effect. An electrohydraulic forming apparatus was developed and experiments were carried out. The results of the experiment showed that the developed apparatus had sufficient energy to deform the blank into the die. Using the hole to emit residual air in the die was more effective than using the vacuum pump in terms of saving on experiment time.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.673-677
• /
• 1986

This paper deals with the state observer-controller which observes unmeasurable state variables of the system and then uses the estimated values as feedback signals. The linearized model is deduced from the nonlinear electrohydraulic servo system. The 4th order analog linear observer-controller and the 2nd order digital one are modelled and implemented using OP amplifiers and IBM PC/XT, respectively. The two observer are experimentally used in the control of an electrohydraulic system. The results are satisfactory in estimation performance and in tracking performance to command signal.

• 대한전기학회논문지
• /
• 제41권1호
• /
• pp.63-72
• /
• 1992

A tracking controller which can improve the performance of nonlinear electrohydraulic position control system is designed and implemented. The method is based on augmenting the system with integrators, obtaining the feedback control law which stabilizes the linear part of the original nonlinear system, and then reajusting the feedback gains using the deseribing funtion method to eliminate the limit cycle in the steady state. The proposed control law is implemented using OP amplifiers, and step and ramp response tests are carried out in the electrohydraulic servomechanism. The results show the improvement in both rransient and steady-state response.

• 한국정밀공학회지
• /
• 제14권5호
• /
• pp.92-99
• /
• 1997

A model reference adaptive control(MRAC) theory is very useful for controlling a plant of which the parameters are unknown or vary during operation usint only input-output signal of plant. In this study, 2' nd order discreter time MRAC controller is designed for an electrohydraulic position control system which is represented with nonlinear mathematical model and the least square method is adopted for the para-meter adjustment law. This control algorthm is applied to the position control of electrohydraulic servosystem through computer simulation and the effect of the change of load, sampling time upon the performance following reference model and upon the performance of estimating plant parameters are examined.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.340-345
• /
• 1987

This paper is describes the improvement of the transient response of the electrohydraulic position control system which exhibit the over-damped characteristics. A new approach, Position Error Prefiltered Proportional (PEPP) control, is proposed and the computer simulation results for the transient responses are analyzed. Experimental results using Z-80 microprocessor are presented.

• 한국항공우주학회지
• /
• 제34권12호
• /
• pp.82-89
• /
• 2006

본 논문에서는 고도 300 km 이상의 고고도 고진공 우주환경에서 발사체의 피치 및 요방향 자세 및 궤적제어를 추력벡터제어 방식으로 수행하는 전기유압식 구동장치시스템의 개발 결과를 기술한다. 성층권 이하에서 운용하는 저고도 발사체용 전기유압식 구동장치시스템과 비교하여 강화된 개발 요구규격 및 이를 충족시키기 위한 신규 설계 및 제작 기술, 성능 검증을 위한 시험장치의 개발 및 이를 사용한 시험 수행 결과를 본 논문에 요약하였다. 시스템 자체 성능 검증을 위한 시험 및 평가가 성공적으로 완료된 구동장치시스템은 관련 시스템과의 접속 및 통합 적합성 검증 후 KSLV-I 발사체에 탑재될 예정이다.

• 항공우주기술
• /
• 제7권1호
• /
• pp.151-160
• /
• 2008

본 논문에서는 발사체에 적용하는 전기-유압식 추력벡터제어 구동장치시스템의 합성공진 현상에 대한 해석 연구결과를 기술한다. 합성공진 현상은 위치서보 구동장치시스템을 유연한 발사체 기체구조체 지지부에 장착하였을 때 발생한다. 이는 관성부하를 갖는 전기-유압식 위치서보 시스템의 유압공진 현상과 유연한 기체구조체 지지부의 구조공진 현상의 합성에 의하여 발생한다. 합성공진 현상은 발사체 제어시스템에 의하여 되먹임 및 증폭되어 안정성을 악화시킬 수 있다. 이와 같은 현상을 정확하게 예측 및 분석할 수 있는 비선형 모델을 개발하였으며 이에 기반을 둔 합성공진 억제 특성이 우수한 동적 압력 되먹임(dynamic pressure feedback) 제어기법을 개발하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.936-941
• /
• 2004

An Optimal Feedforward Integral Variable Structure or FIVSC approach for an electrohydraulic position servo control system is presented in this paper. The FIVSC algorithm combines feedforward strategy and integral in the conventional Variable Structure Control (VSC) and calculating the control function to guarantee the existence of a sliding mode. Furthermore, the chattering in the control signal is suppressed by replacing the sign function in the control function with a smoothing function. The simulation results illustrate that the purposed approach gives a significant improvement on the tracking performances when compared with some existing control methods, like the IVSC and MIVSC strategies. Simulation results illustrate that the purposed approach can achieve a zero steady state error for ramp input and has an optimal motion with respect to a quadratic performance index. Moreover, Its can achieve accurate servo tracking in the presence of plant parameter variation and external load disturbances.