• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.924-931
• /
• 2002

Vacuum interrupters in order to be used in various switch-gear components such as circuit breakers, distribution switches, contactors, etc. spread the arc uniformly over the surface of the contacts. The electrodes of vacuum interrupters are made of sinter-forged Cu-Cr materials for good electrical and mechanical characteristics. Since the closing velocity is 1-2m/s and impact deformation of the electrode depends on the strain rate at that velocity, the dynamic behavior of the sinter-forged Cu-Cr is a key to investigate the impact characteristics of the electrodes. The dynamic response of the material at the high strain rate is obtained from the split Hopkinson pressure bar test using disc-type specimens. Experimental results from both quasi-static and dynamic compressive tests are Interpolated to construct the Johnson-Cook model as the constitutive relation that should be applied to simulation of the dynamic behavior of the electrodes. The impact characteristics of a vacuum interrupter are investigated with computer simulations by changing the value of five parameters such as the initial velocity of a movable electrode, the added mass of a movable electrode, the wipe spring constant, initial offset of a wipe spring and the virtual fixed spring constant.

• 센서학회지
• /
• 제22권6호
• /
• pp.400-403
• /
• 2013

The piezoelectric composite film of ferroelectric PZT ceramic ($PbZr_xTi_{1-x}O_3$) and polymer (PDMS, Polydimethylsiloxane) was prepared to improve the flexibility of piezoelectric material. The bar coating method was applied to fabricate flexible nanocomposite film with large surface area by low cost process. In the case of using metal electrode on the composite film, although there is no problem by bending process, the electrode is usually broken away from the film by stretching process. However, the well-attached, flexible CNT electrode on PZT/PDMS film improved flexibility, especially stretchability. PZT particles was usually settled down into polymer matrix due to gravity of the weighty particle, so to improve the dispersion of PZT powder in polymer matrix, small amount of additives (CNT powder, Carbon nanotube powder) was physically mixed with the matrix. By stretching the film, an output voltage of PZT(70 wt%)/PDMS with CNT (0.5 wt%) was measured.

• Bulletin of the Korean Chemical Society
• /
• 제19권1호
• /
• pp.39-44
• /
• 1998

$LiCoO_2$ powder was synthesized in an aqueous solution by a sol-gel method and used as a cathode active material for a lithium ion rechargeable battery. The layered $LiCoO_2$ powders were prepared by igniting in air for 12 hrs at 600 ℃ $(600-LiCoO_2)$ and 850 ℃ $(850-LiCoO_2)$. The structure of the $LiCoO_2$ powder was assigned to the space group R bar 3 m (lattice parameters a=2.814 Å and c=14.04Å). The SEM pictures of $600-LiCoO_2$ revealed homogeneous and fine particles of about 1 μm in diameter. Cyclic voltammograms (CVs) of $600-LiCoO_2$ electrode displayed a set of redox peaks at 3.80/4.05 V due to the intercalation/deintercalation of the lithium ions into/out of the $LiCoO_2$ structure. CVs for the $850-LiCoO_2$ electrode had a major set of redox peaks at 3.88/4.13 V, and two small set of redox peaks at 4.18/4.42 V and 4.05/4.25 V due to phase transitions. The initial charge-discharge capacity was 156-132 mAh/g for the $600-LiCoO_2$ electrode and 158-131 mAh/g for the $850-LiCoO_2$ electrode at the current density of 0.2 mA/cm2. The cycleability of the cell consisting of the $600-LiCoO_2$ electrode was better than that of the $850-LiCoO_2$. The diffusion coefficient of the $Li^+$ ion in the $600-LiCoO_2$ electrode was calculated as $4.6{\times}10^{-8}\; cm^2/sec$.

• Journal of Welding and Joining
• /
• 제14권2호
• /
• pp.57-64
• /
• 1996

In this paper, authors are trying to find optimum spot weldig conditions to minimize indentation of the plate surface which is crucial to quality of stainless rolling stocks. At first, to derive a simple equation to estimate the depth of indentation, a simplified one-dimensional bar model is proposed and validity of the model is confirmed by experiments. And also, to find proper welding conditions giving satisfied tensile strength of the welded joint, a simple formula is derived referring to the standard spot welding conditions by AWS. Optimization problem is formulated to find welding conditions such as welding current, time and applied force which give minimum indentation and proper tensile strength of joint, and solutions are found out. According to the results, the depth of indentation can be expressed by applied electrode froces and it can be shown that an optimum applied force exists.

• Smart Structures and Systems
• /
• 제18권2호
• /
• pp.335-354
• /
• 2016

This contribution presents an extended one-dimensional theory for piezoelectric beam-type structures with non-ideal electrodes. For these types of electrodes the equipotential area condition is not satisfied. The main motivation of our research is originated from passive vibration control: when an elastic structure is covered by several piezoelectric patches that are linked via resistances and inductances, vibrational energy is efficiently dissipated if the electric network is properly designed. Assuming infinitely small piezoelectric patches that are connected by an infinite number of electrical, in particular resistive and inductive elements, one obtains the Telegrapher's equation for the voltage across the piezoelectric transducer. Embedding this outcome into the framework of Bernoulli-Euler, the final equations are coupled to the wave equations for the longitudinal motion of a bar and to the partial differential equations for the lateral motion of the beam. We present results for the wave propagation of a longitudinal bar for several types of electrode properties. The frequency spectra are computed (phase angle, wave number, wave speed), which point out the effect of resistive and inductive electrodes on wave characteristics. Our results show that electrical damping due to the resistivity of the electrodes is different from internal (=strain velocity dependent) or external (=velocity dependent) mechanical damping. Finally, results are presented, when the structure is excited by a harmonic single force, yielding that resistive-inductive electrodes are suitable candidates for passive vibration control that might be of great interest for practical applications in the future.

• 콘크리트학회지
• /
• 제4권2호
• /
• pp.75-81
• /
• 1992

염분을 함유한 철근콘크리트중의 철근부식에 관한 2년 촉진시험으로부터 콘크리트표면에서 측정한 자연전위값과 실제의 철근 부식상황과를 비교한 결과 철근의 수식상황을 자연전위법을 이용하여 비파괴적으로 진단하는 방법이 유효함을 알았다. 포화칼로멜전극을 사용했을 경우 -300mV이하이면 부식이 발생하였으며 -200mV이상이면 부식이 발생하지 않았다. 또한 부시공시체에 대한 휨강도시험도 행하였으며 중성화에 대한 검토로 행하였다.

• 조명전기설비학회논문지
• /
• 제23권10호
• /
• pp.143-150
• /
• 2009

봉형접지극은 타 접지전극 형태에 비해 쉬운 시공성으로 국 내외적으로 배전계통에 보편적으로 사용하고 있는 접지극 형태이다. 따라서 보다 나은 봉형접지극의 시공성 향상을 위해 형태 변형, 형상 개량, 재질 개선 등 많은 연구가 진행되고 있다. 그러나 접지공사는 다양한 토질을 대상으로 이루어지기 때문에 봉형접지극 자체에 대한 개선으로는 시공성 향상에 한계가 있다. 따라서 본 연구에서는 봉형접지극의 직렬 및 병렬 시공을 기계화(중공스크루로드 이용)함으로써 소정의 접지저항값을 효과적으로 확보할 수 있는 공법에 관한 연구이다. 본 연구 결과를 축약하면 같은 조건하(동일한 대지저항율, 동일한 접지동봉 개수, 동일한 직렬 또는 병렬 시공, 동일한 접지저항저감제, 물 공급)에서 현재 적용하고 있는 항타(심타)공법과 기계화공법에 대하여 새롭게 제시된 기계화공법으로 인한 접지저항값의 저감 효과를 비교하였다. 제안된 기계화공법이 항타공법에 비해 비교적 안정된 접지저항 저감 효과를 얻었다.

• 한국전기전자재료학회논문지
• /
• 제28권1호
• /
• pp.40-45
• /
• 2015

Electrode systems: a protrusion on conductor (POC), a protrusion on enclosure (POE), a crack in epoxy plate and a free particle (FP) were fabricated to simulate insulation defects in a gas insulated switchgear (GIS). $SF_6$ gas was filled in the electrode systems by 3 bar and/or 5 bar, respectively. Partial discharge (PD) pulses were detected through a $50{\Omega}$ non-inductive resistor. A calibration test was carried out according to IEC 60270, and the sensitivity was 0.25 pC/mV. PD pulses were distributed in the phase of $50^{\circ}{\sim}135^{\circ}$ and over 95% of them existed in the phase of $55^{\circ}{\sim}120^{\circ}$ for the POC. PD pulses were distributed in the phase of $230^{\circ}{\sim}310^{\circ}$ and over 90% of them existed in phase of $220^{\circ}{\sim}300^{\circ}$ for the POE. PD pulses occurred in the phase of $40^{\circ}{\sim}60^{\circ}$ and $220^{\circ}{\sim}300^{\circ}$ for the crack, and pulse counts were 25% higher in negative polarity than in positive polarity. PD pulses were distributed in every phase unlike to other three electrode systems and the peak magnitude was measured at $118^{\circ}$ and $260^{\circ}$ for the FP. As described above, PD pulses were observed in positive polarity for the POC, in negative one for the POE, in both one for the crack and the FP. In conclusion, it is expected that the identification rate of defect type can be improved by considering the polarity ratio of PD pulses on the PRPDA method.

• 한국산학기술학회논문지
• /
• 제3권2호
• /
• pp.80-83
• /
• 2002

본 연구는 콘크리트 배합시 염분의 함량이 구조물의 부식에 미치는 영향을 조사하기 위하여 수행되었다. 콘크리트는 물 : 포틀랜트 cemente : 자갈 : 모래의 비율을 1 : 1.78 : 5.35 : 4.73의 비율로 하여 배합하였으며 염분의 함량은 0∼3.5wt%의 범위에서 철근의 부식을 연구하였다. 부식특성을 연구하기 위하여 부식전위를 2년간 측정하였으며 이를 콘크리트 파괴후의 철근의 외관 부식도와 비교하였다. 옥내와 옥외에 두었을 때 부식속도의 차이는 없었으며 염분의 함량이 증가함에 따라 활성이 큰 전위값이 측정되었다. 전위값이 낮은 시편은 부동태 피막이 파괴되어 부식이 진행하고 있었으며, 전위값이 높은 시편에서는 부식생성물이 관찰되지 않았다. 본 실험의 결과로 보강용 강재의 부식손상 정도를 자연전위 측정방법을 통하여 콘크리트내 보강용 철근의 부식거동 및 부식속도에 대한 비괴적인 전기화학적 기술로서 구조물의 손상여부를 확인할 수 있었다.

• 대한환경공학회지
• /
• 제36권4호
• /
• pp.295-302
• /
• 2014

본 연구는 물 재이용을 위한 하수고도처리공정으로서 이단유로 축전식 탈염공정의 적용 가능성을 평가하였다. 일반적으로 축전식 탈염장치는 전극이 병렬식으로 단순 적층되어 있는 반면에 이단유로 축전식 탈염장치는 분리판에 의해 모듈이 2개의 단으로 구분되어 1단과 2단이 수리학적 직렬연결이 되도록 고안되었다. 동일한 유입조건에서 전산유체역학 분석결과 이단유로 모듈이 단일유로 모듈에 비해 스페이서에서 보다 균등하고 빠른 유속분포를 보였고, 사영역도 상대적으로 작게 나타났다. 하지만 입구와 출구 간 압력강하는 단일유로 모듈이 0.4 bar인 반면 이단유로 모듈은 0.7 bar로 높게 나타났다. NaCl용액을 원수로 사용한 단위셀 테스트 결과, 단일유로와 이단유로의 최대 탈염효율은 유입유량 10 mL/min/cell pair에서 각각 88%, 91%이었다. 유량증가에 따른 단위셀 압력강하의 증가는 이단유로가 단일유로보다 높게 나타났으며, 유입유량 70 mL/min/cell pair에서 이단유로의 압력강하는 1.67 bar로 단일유로의 압력강하보다 2배 높게 나타났다. 이단유로의 압력강하를 완화시키기 위하여 전극 간 간격을 100에서 $200{\mu}m$으로 늘린 결과, 탈염효율은 유사하게 유지하면서 압력강하는 최대 0.87 bar로 낮게 유지할 수 있었다. Proto-type 축전식 탈염장치에 하수처리수를 주입하여 연속 운전한 결과, TDS 제거효율은 평균 78%로 나타났으며, 특정이온의 경우, $NH_4{^+}$-N, $NO_3{^-}$-N 및 $PO_4{^{3-}}$-P 제거효율이 각각 50%, 93% 및 50%로 나타나 질소제거 관점에서 CDI기술의 하수고도처리공정 활용가능성이 높을 것으로 판단된다.