• 전기화학회지
• /
• 제10권3호
• /
• pp.196-202
• /
• 2007

본 연구에서는 고분자 전해질 연료전지의 가습조건의 변화에 따른 정상상태 및 비정상상태 운전특성을 살펴보았다. 전압을 OCV에서 0.25 V까지 변화시키면서 PEFC 연료전지의 정상상태 성능을 정전압 모드에서 측정하여 전류-전압 곡선에 나타내어 고찰하였다. 또한, 일부 전압조건에서 연료전지의 비정상상태 성능변화를 측정하였다. 수소극 가습에 따른 성능을 평가하기 위하여 공기극은 건조공기를 공급한 상태에서 수소극에 공급되는 수소의 습도를 20%에서 100%로 변화시키면서 연료전지의 성능을 측정하였다. 일반적으로 고전압 영역에서는 높은 작동온도가 높은 성능을 나타내고 있으나, 저전압 영역에서는 낮은 작동온도가 높은 성능을 나타내었다. 임피던스 측정을 통하여 건조한 전해질막 조건에서 ohmic 손실이 커지며 외부가습과 자체가습량이 커지면 저주파수 영역에서 물질전달손실 효과가 나타나는 것을 확인하였다. 또한, 전압을 감소시킨 후 전류의 시간에 따른 변화를 고찰하여 연료전지 시스템의 동적특성을 고찰하였다. 전압을 감소시킨 경우, 작동온도의 상승에 따라서 정상상태에 도달하는 시간이 줄어들었으며, 저전압 영역을 제외하면 생성된 물에 의한 자체가습은 정상상태 도달시간을 지연시키는 효과를 가져왔다.

• 전기화학회지
• /
• 제15권2호
• /
• pp.95-100
• /
• 2012

올리빈 구조를 가지는 $LiFePO_4$ 양극활물질은 낮은 가격과 안정성으로 인해 리튬 이차전지 시장에서 큰 관심을 받고 있다. 그러나 낮은 이온 전도도와 작동전압 때문에 상업적으로 이용되기엔 사용분야의 응용에 제한이 있다. 이러한 문제를 해결하기 위해서 철 양이온을 망간 양이온과 같은 전이금속으로 치환함으로써 작동전압을 높이는 연구가 시행되고 있다. 또한 미세구조의 나노화를 통해 리튬 이온의 확산거리를 짧게 만들어 줌으로써 이온 전도도를 높여주는 연구도 진행 중이다. 그래서 이번 연구에서는 이온의 확산거리를 짧게 만들어 주기 위해 표면적을 넓힐 수 있는 전기방사를 이용해 물질을 합성하였고, 이를 확인하기 위하여 시차주사현미경 관측을 통해 균일한 나노 섬유의 형성을 확인하였다. 또한 결정구조를 관찰하기 위해 X-선 회절 분석을 하였는데, 다른 상의 관찰 없이 단일상의 결정구조를 얻음을 확인하였다. 전기화학적 성능 확인방법으로는 충방전 테스트기를 이용하여 초기 충방전 곡선을 분석하였고, 계면저항 및 리튬 양이온의 확산을 알아보기 위해 임피던스 측정을 실행하였다.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3475-3481
• /
• 2014

This paper describes how primary contaminants in ambient air affect the performance of the cathode in fuel cell electric vehicle applications. The effect of four atmospheric pollutants ($SO_2$, $NH_3$, $NO_2$, and CO) on cathode performance was investigated by air impurity injection and recovery test under load. Electrochemical analysis via polarization and electrochemical impedance spectroscopy was performed for various concentrations of contaminants during the impurity test in order to determine the origins of performance decay. The variation in cell voltage derived empirically in this study and data reported in the literature were normalized and juxtaposed to elucidate the relationship between impurity concentration and performance. Mechanisms of cathode degradation by air impurities were discussed in light of the findings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.101-105
• /
• 1994

A/F sensor with a sensing and a pumping element, which is made of YSZ(yttria stabilized zirconia) sheets, can be used for the combustion control of lean burn engine. A/F sensor can detect the oxygen partial pressure in more wide range than the other oxygen sensors, such as the limiting current type oxygen sensor and λ-sensor. However this sensor has the disadvantage that the characteristics has been degraded rapidly due to the physical or electrochemical reasons. The blackening phenomenon is known as one of the degradations caused by high voltage biased for oxygen pumping. In this paper, we have studied to analyze the blackening phenomenon by comparing two characteristics between before and after blackening in impedance spectroscopy, and discussed the blackening mechanism.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.627-627
• /
• 2009

In this work, the activated carbons (ACs) with high porosity were synthesized from pitch by KOH chemical activation. The structure and surface properties of ACs were characterized by means of elemental analysis, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy(XPS). And, the influence of the KOH-to-pitch ratio on the porosity of the ACs was investigated using the nitrogen adsorption isotherms at 77 K and a scanning electron microscopy (SEM). As a result, pitch could be successfully converted into ACs with well-developed micro and mesopores. The specific surface areas and pore volumes were increased with an increase of the KOH-to-pitch ratio. Furthermore, it was found that the addition of KOH led to the transformation of the micropores to the meso- and macropores. In the application to electric double layer capacitors (EDLC), the pitch-based ACs showed a higher capacitance per weight and per volume, and an excellent electrochemical stability in the high voltage region.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.115-115
• /
• 2008

본 논문에서는 최적화된 ECMP 공정을 위하여 I-V 특성 곡선과 CV법을 이용하여 패시베이션 막의 active, passive, transient, trans-passive 영역의 전기화학적 특성을 알아보았으며, Cu막의 표면 형상을 Scanning Electron Microscopy (SEM) 측정과 금속 화학적 조성을 Energy Dispersive Spectroscopy (EDS) 분석을 통해 분석하였다.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제11C권3호
• /
• pp.58-62
• /
• 2001

Since Metallo-Porphyrin (MP) is very interesting compound due to its unique electronic and redox properties and it is also chemically and thermally stable, MP has been studied for potential memory and switching devices. In this study, thin films of 5,10,15,20-Tetrakis-Octadecyloxymethylphenyl-Porphyrin-Zn(II) were prepared by the Langmuir-Blodgett (LB) method and characterized by using UV/vis absorption spectroscopy and cyclic voltammetry. It was found that the proper transfer surface pressure for film deposition was 25 mN/m and the limiting area per molecule was 135 ${\AA}^2$/molecule. The current-voltage (I-V) characteristics of these films were investigated. Further details on the electrical properties of Porphyrin-Zn(II) derivative films will be discussed.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.87-92
• /
• 2015

Carbon thin films were deposited on STS 316L sheets by inductively coupled plasma enhanced magnetron sputtering with or without substrate bias voltage. Typical Raman spectrum for amorphous diamond-like carbon (DLC) was obtained, and the interfacial contact resistance (ICR) was measured to show its conductive nature. The electrochemical impedance spectroscopy (EIS) was used to investigate the corrosion mechanism of the carbon coating under the polymer electrolyte membrane fuel cell (PEMFC) condition. According to the pore-corrosion mechanism, the electrolyte penetrates the carbon coating through the pores and reacts with the substrate. As the substrate corrosion proceeds, the pore enlargement occurs and the surface area of the substrate exposed to the electrolyte. Applicability of the carbon coating for the PEMFC bipolar plate was evaluated by potentiodynamic polarization experiments. Finally, an adhesion problem was briefly considered.

• Transactions on Electrical and Electronic Materials
• /
• 제18권3호
• /
• pp.136-140
• /
• 2017

The state of charge (SOC) is an important parameter in a battery-management system (BMS), and is very significant for accurately estimating the SOC of a battery. Li-ion batteries boast of excellent performance, and can only remain at their best working state by means of accurate SOC estimation that gives full play to their performances and raises their economic benefits. This paper summarizes some measures taken in SOC estimation, including the discharge experiment method, the ampere-hour integral method, the open circuit voltage method, the Kalman filter method, the neural network method, and electrochemical impedance spectroscopy (EIS. The principles of the various SOC estimation methods are introduced, and their advantages and disadvantages, as well as the working conditions adopted during these methods, are discussed and analyzed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.216-217
• /
• 2019

The battery powered electric vehicle (EV) is one of most promising technologies in 21^st century. Though the lithium batteries are playing an important role in the EVs, they are only applicable until their capacities reach 80%, the end of its useful first life. Yet, these batteries can live a second life such as Energy Storage Systems (ESS). In order to utilize the Residual Useful Life (RUL) of the batteries the State of Health (SOH) of them needs to be estimated by a nondestructive test such as Electrochemical Impedance Spectroscopy (EIS) technique. Though many kinds of different EIS instruments are commercially available, most of them can only test a battery module less than 10V and the price of the instrument is very high. In this paper a low-cost EIS instrument suitable for measuring the impedance spectrum of the high voltage battery module is proposed and its validity is verified through the experiments. In order to prove the accuracy of the developed EIS instrument its measured impedance spectrum is compared with the results obtained by a commercial instrument. The Chi Square value calculated between two impedance spectrum measured by both developed and commercial instruments are less than 2%, which prove the strong correlation between two results.