• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.576-581
• /
• 2005

We fabricated red organic light emitting diodes(OLEDs) utilizing tis(8-hydroxyquinoline) aluminum $(Alq_3)$ doped with $5\%$ of (4-(dicyanomethylene)-2-i-propyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran) (DCJTI) and investigated the driving and modulation characteristics for applying to the electro-optical conversion device. To improve the driving characteristics of red OLEDs, 3 V of offset voltage, which is equal to the turn on voltage, Is applied to the device. Offset voltage enhanced the optical EL output and reduced the rise time of EL waveforms of red OLEDs, and hence the cutoff frequency is increased with increasing applied voltage. The optical pulse of 100 MHz has been obtained from red OLEDs. Therefore, we confirmed that the red OLEDs can be applied to the fields of optical communication as an electro-optical conversion device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.114-118
• /
• 2006

We investigated the transient electroluminescence (EL) and modulation characteristics of red organic light-emitting diodes (OLEDs), which consist with 4-(dicyanomethylene)-2-i -propyl-6-(1,1,7,7-tetramethyljulolidyl-9-cnyl)-4H-pyran (DCJTI) and rubrene doped into tris(8-hydroxyquinoline)aluminum ($Alq_3$). The transient EL waveforms showed two components, the overshooting peak and constant component, indicating that the excess amount of accumulated charges simultaneously recombine at the onset moment. This overshooting effect reduced the rise time of transient EL and enhanced the optical output of OLEDs when the pulse voltage applied to the device. We demonstrated that the red OLEDs could be use for the high-speed switching application by driving at more than 100 MHz and transmitting the video signals utilized as the electro-optical conversion device

• 전자공학회논문지D
• /
• 제35D권1호
• /
• pp.72-78
• /
• 1998

Polarization mode converters have been produced by utilizing Ti:LiNbO$_{3}$ channel waveguide and strain-optic effect. Shear strain for periodic perturbations of optical channel waveguides and phase matching can be obtained by an evaporated periodic SiO$_{2}$ thin film at 300.deg. C. The electrodes located on the either side of waveguide provide a means to electro-optically tune the wavelength for maximum polarization conversion via the electrooptic effect. The maximum conversion effeciency was observed at 21.deg. C for V=0 and 46.deg. C for V=30V aro the device having 7 .mu.m waveguide wiith and 350 periodic pads. The dependence of the number of pads on conversion efficiency was observed experimentally.fficiency was observed experimentally.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.288-288
• /
• 2009

We have studied polarity effects of dielectric anisotropy effects on electro-optical characteristics of a twisted nematic mode driven by fringe electric field, which has wide viewing angle characteristics. Our device is designed as normally black mode between parallel polarizers. The perfect polarization conversion of incident light, which passes through a polarizer, is achieved, when it passes through the twisted liquid crystal (LC) layer. If an electric field is applied, the LC molecules with a positive (or negative) dielectric anisotropy rotate parallel (or perpendicular) to the horizontal component of a fringe electric field as increasing transmittance. From the calculated results, enhanced transmittance of the fringe field-twisted nematic (FF-TN) mode with positive dielectric anisotropy of + 8.2 can be obtained.

• 한국광학회지
• /
• 제17권5호
• /
• pp.430-436
• /
• 2006

1550nm 파장대역에서 편광에 관계없이 동작하는 $Ti:LiNbO_3\;2{\times}2$ 삽입/분기 광 멀티플렉서를 구현하였다. 소자는 두 개의 입 출력 광도파로, 두 개의 편광모드분리기, 두 개의 편광모드 변환기 그리고 전기광학효과로 파장을 가변시킬 수 있는 전극으로 구성되었다. TE, TM 편광에 대해서 단일모드 특성을 갖는 채널 광도파로는 x-cut $LiNbO_3$에 Ti 확산 방법으로 제작하였으며, 채널 광도파로 위에 배열된 $SiO_2$ 패드의 전단 스트레인을 이용하여 위상정합 편광모드변환기를 구현하였다. 한편 전기광학효과를 이용하여 파장을 가변시키기 위해서 전압을 인가하여 광도파로의 복 굴절률을 변화시켰다. 0.094nm/V 파장가변률과 최대 17nm 파장을 가변시켰으며, 8.2dB 부 모드레벨과 3.72nm FWHM을 측정하였다.

• 고무기술
• /
• 제13권1호
• /
• pp.1-9
• /
• 2012

Click chemistry had enjoyed a wealthy decade after it was introduced by K.B.Sharpless and his co-worker on 2001. Since there is no optimized method for synthesis of click polymer, therefore, this paper introduced three click reaction methods such as catalyst, non-catalyst and azide-end capping for fluorene-based functional click polymers. The obtained polymers have reasonable molecular weight with narrow PDI. The polymers are thermally stable and almost emitted blue light emission. The synthesized fluorene-based functional click polymers were characterized to compare the effect of click reaction methods on polymer electro-optical properties as well as device performance on quasi-solid-state dye sensitized solar cells (DSSCs) applications. The DSSCs with configuration of $SnO_2:F/TiO_2/N719$ dye/quasi-solid-state electrolyte/Pt devices were fabricated using these click polymers as a solid-state electrolyte components. Among the devices, the catalyzed click polymer composed device exhibited a high power conversion efficiency of 4.62% under AM 1.5G illumination ($100mW/cm^2$).These click polymers are promising materials in device application and $Cu^I$-catalyst 1, 3-dipolar cycloaddition click reaction is an efficient synthetic methodology.

• 센서학회지
• /
• 제6권4호
• /
• pp.252-257
• /
• 1997

ITO(indium-tin-oxide)/PPV(poly(p-phenylenevihylene))/음극 전극의 단층구조와 ITO /PVK(poly(N-vinylcarbazole))/PPV/음극전극의 이층구조를 가진 유기 EL(electroluminescence) 소자를 제작하였으며, 전기-광학적 특성을 측정하였다. 실험 결과, 단층구조에서는 PPV막의 열변환 온도를 $140^{\circ}C$에서 $260^{\circ}C$로 증가할수록 최대 휘도가 $118.8\;cd/m^{2}$(20V)에서 $21.14\;cd/m^{2}$(28V)으로 감소하였고, EL 스펙트럼의 최대 피크가 500nm에서 580nm로 이동하였다. 또한, 음극전극의 일함수가 낮을수록 소자의 발광휘도와 주입 전류는 증가되었다. 이층구조에서는 PVK막의 농도가 감소함에 따라 발광휘도가 $70.71\;cd/m^{2}$(32V)에서 $152.7\;cd/m^{2}$(26V)으로 증가하였다.

• 한국광학회지
• /
• 제31권1호
• /
• pp.37-44
• /
• 2020

본 연구에서는 기본적인 평면 태양 전지 구조에 1차원 주기를 가지는 에미터 전극 배치를 통해 광학 및 전기적 효율을 최적화하는 설계방법을 제안한다. 에미터 전극의 주기가 줄어들면 애퍼처 비율이 감소해 빛 흡수율이 줄어들어 태양 전지 성능 저하에 영향을 끼친다. 본 연구에서는 시뮬레이션을 통해 가장 간단한 평판형 태양 전지 구조 내에서 에미터 전극 배열의 최적안을 제시하였다. 광학적 측면에서 에미터 전극이 없이 광흡수층 전면에서의 광흡수를 하는 레퍼런스 소자와 성능이 유사한 조건을 도출했다. 그리고 광흡수 및 전기적 효율 측면을 모두 고려하여 가장 효과적인 전극 구조를 제안하였다. 본 연구 결과는 광전 변환으로 생성된 전하를 전극으로 가장 효율적으로 전달할 수 있는 구조를 제안함으로써, 대체 에너지원에서 큰 비중을 차지하고 있는 태양 전지의 활용성을 높이는데 기여할 것이다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.228-231
• /
• 2006

This paper briefly introduces silicon based thin film solar cells: amorphous (a-Si:H), microcrystalline ${\mu}c-Si:H$ single junction and $a-Si:H/{\mu}c-Si:H$ tandem solar cells. The major difference of a-Si:H and ${\mu}c-Si:H$ cells comes from electro-optical properties of intrinsic Si-films (active layer) that absorb incident photon and generate electron-hole pairs. The a-Si:H film has energy band-gap (Eg) of 1.7-1.8eV and solar cells incorporating this wide Eg a-Si:H material as active layer commonly give high voltage and low current, when illuminated, compared to ${\mu}c-Si:H$ solar cells that employ low Eg (1.1eV) material. This Eg difference of two materials make possible tandem configuration in order to effectively use incident photon energy. The $a-Si:H/{\mu}c-Si:H$ tandem solar cells, therefore, have a great potential for low cost photovoltaic device by its various advantages such as low material cost by thin-film structure on low cost substrate instead of expensive c-Si wafer and high conversion efficiency by tandem structure. In this paper, the structure, process and operation properties of Si-based thin-film solar cells are discussed.