• 제목/요약/키워드: Electro-luminescence

검색결과 58건 처리시간 0.025초

EL 시트 구동을 위한 인버터의 설계 및 제어 (Inverter Design and Control for Driving Electro-Luminescence Sheet)

  • 이승요
    • 전력전자학회논문지
    • /
    • 제14권5호
    • /
    • pp.355-364
    • /
    • 2009
  • 디스플레이 광원으로 많이 사용되고 있는 EL(Electro-Luminescence)은 특히 면광원 형태로 광고용 판넬에 많이 이용되고 있다. 면광원 EL을 최상의 조건으로 구동하기 위해서는 EL의 부하특성을 알아야 할 필요가 있으며, 본 논문에서는 광고용 판넬의 광원으로 사용되는 EL의 부하특성을 분석하기 위한 모델링을 수행하고 이를 기반으로 EL 시트를 구동하기 위한 인버터의 설계를 수행한다. 얻어진 부하 모델을 통해 인버터의 토폴로지 선정은 물론 구동 설계 파라미터를 제시하고, 시뮬레이션 및 실험을 통하여 설계된 EL 구동 시스템의 타당성과 그 구동 특성을 검증한다.

유기발광 소자의 발광효율 연구 (The study of Luminescence Efficiency of OLED)

  • 이정호
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2004년도 하계학술발표회
    • /
    • pp.172-173
    • /
    • 2004
  • Recently there has been many understood the basis device physics OLEDs and their basic operating principle. We demonstrate that there have many relation in order to improve luminescence efficiency both emitting light material physics characteristics and luminary. Efficient Electro Luminescence from organic materials was first reported in 1987 at Kodak. OLEDs emitting light material use tris-(8-hydroxyquinoline)(Alq3). Sudied maximum luminescence efficiency about structure of optimized emitting light layer of OLED which do observing change of luminescence efficiency by structure change of organic material in this paper.

  • PDF

유기 전기 luminescence 다이오드 특성 (A Characterization on Organic Electro-luminescence)

  • 이한성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.165-169
    • /
    • 2007
  • Organic EL has been expected to adopt to a new styles of technology that make flat display after Tang & Vanslyke made food electric luminescence device in late 1980s. Their studies based on multi layer structure that consists of emitting layer and carrier transporting layer using proper organic material. In this study we made multi layer device using $Eu(TTA)_3(phen)$ as a luminescence material by PVD and investigate luminous properties of each device. But oxidization of organic layer by ITO, energy walls in both pole interface, contaminations of ITO surface, importance of protecting membrane, diffusive dimming of light to cathode organic layer, these causes of degradations are common facts of a macromolecule and micromolecule. We think these degradation caused by the impact of heat and electro-chemical factor, bulk effect and interface phenomenon, and raise a question.

  • PDF

유기 EL 디스플레이 생산 공정을 위한 잉크젯헤드 제어시스템 구현 (Development of Ink-Jet Head Controller for Electro-Luminescence Display)

  • 정성욱;이희숭;유정래;박재석;정명진
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.623-625
    • /
    • 2004
  • In Electro-Luminescence Display making process, it is necessary to do high molecule patterning effectively. Recently, one of the most effective way is the patterning method using Ink-Jet head controller. To maximize the effect, it is needed to control each channel of Ink-Jet head and develop that controller. Thus, we implement the Ink-Jet Head Controller which can control the parameters of 128 fire pulses independently, improve the accuracy of patterns more than 100 times previous ones, and apply random patterns.

  • PDF

유기 전기발광 소자에 관한 연구 (A Research on Organic Electro-luminescence)

  • 이한성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.82-85
    • /
    • 2005
  • Organic EL has been expected to adopt to a new styles of technology that make flat display after Tang & Vanslyke made good electric luminescence device in late 1980s. Their studies based on multi layer structure that consists of emitting layer and carrier transporting layer using proper organic material. In this study, we made multi layer device using $Eu(TTA)_3(phen)$ as a luminescence material by PVD and investigate luminous properties of each device. But oxidization of organic layer by ITO, energy walls in both pole interface, contaminations of ITO surface, importance of protecting membrane, diffusive dimming of light to cathode organic layer, these causes of degradations are common facts of a macromolecule and micromolecule. We think these degradation caused by the impact of heat and electro-chemical factor, bulk effect and interface phenomenon, and raise a question.

  • PDF

나노구조 박막의 EL 특성 (Electro-luminescence Characteristics of Nano-Structural Thin Film)

  • 최용성;조장훈;송진원;이경섭
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
    • /
    • pp.274-275
    • /
    • 2006
  • A new thin film materials can be built up at the molecular level, and the relationship between these artificial structures and the properties of materials can be explored. In this paper, in order to confirm the application possibility to the molecular electronic device of the organic materials, we have investigated electro-luminescent (EL) characteristics of organic EL device using $Alq_3$, PBD as emitting material. Current and luminance can be seen that express a similar relativity in voltage and could know that luminance is expressing current relativity.

  • PDF

$SiO_2$ coating of ZnS:Cu,Cl blue-green nano phosphor

  • Lee, Hong-Ro ;Park, Chang-Hyun ;Cho, Tai-Yeon;Han, Sang-Do
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2007년도 추계학술대회 논문집
    • /
    • pp.75-76
    • /
    • 2007
  • ZnS:Cu,Cl phosphor was coated by solid-gel reaction with $SiO_2$ outside layer. The effect of $Cu^{2+}$-doping concentration has been investigated on the luminescence characteristics of ZnS:Cu,Cl blue-green phosphors for inorganic electro luminescent device. Also, SiO2 coated layers' effect on luminescence characteristics. Evaluation of luminescence characteristics dependent on the synthesis conditions is important to get high-performance phosphors properties. EL and PL properties such as luminescence intensity and chromaticity of ZnS:Cu,Cl phosphors synthesized with different concentration of activator, $Cu^{2+}$, were analysed separately

  • PDF

Synthesis and characteristics of ZnS:Cn,Cl blue-green naao phosphor

  • Lee, Hong-Ro ;Park, Chang-Hyun;cho, Tai-Yeon;Han, Sang-Do
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2007년도 추계학술대회 논문집
    • /
    • pp.112-113
    • /
    • 2007
  • ZnS:Cn,Cl phosphor was coated by solid-gel reaction with $SiO_2$ outside layer. The effect of $Cu^{2+}$ -doping concentration has been investigated on the luminescence characteristics of ZnS:Cn,Cl blue-green phosphors for inorganic electro luminescent device. Also, SiO2 coated layers' effect on luminescence characteristics. Evaluation of luminescence characteristics dependent on the synthesis conditions is important to get high-performance phosphors properties. EL and PL properties such as luminescence intensity and chromaticity of ZnS:Cn,Cl phosphors synthesized with different concentration of activator, $Cu^{2+}$, were analysed separately

  • PDF

$Eu^{2+}$-doped $Ca_2Si_5N_8$ 박막의 광학특성 (Luminescence Properties of $Eu^{2+}$-doped $Ca_2Si_5N_8$ Thin Films)

  • 장보윤;박주석
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.25-27
    • /
    • 2007
  • $Eu^{2+}$-doped $Ca_2Si_5N_8$ was grown on Si(100) substrate using metal-organic deposition (MOD) method and post-annealed at $900^{\circ}C$ in various atmosphere. Luminescence properties of these thin films were investigated with variations of $Eu^{2+}$-doped concentrations and annealing atmosphere. Thin film was formed with clean surface and uniform thickness of about 72 nm. From the measurements of luminescence properties of thin films, film must be post-annealed in nitrogen or mixture of nitrogen and hydrogen atmosphere to emit a sufficient light. For $Ca_{1.5}Eu_{0.5}Si_5N_8$ thin film annealed at $900^{\circ}C$ in nitrogen atmosphere, excitation band from 380 to 420 nm was detected with the maximum intensity at 404 nm and two broad emission bands from 530 to 630 nm were observed. These broad excitation and emission bands must be attributed to the nitrogen incorporations into the films. From the results, $Ca_{2-x}Eu_xSi_5N_8$ thin film has probability for next generation thin film lighting applications such as light emitting diode (LED) or electro-luminescence (EL).

  • PDF