• Journal of Electrical Engineering and Technology
• /
• 제6권4호
• /
• pp.431-438
• /
• 2011

To ensure that equipment outages do not directly impact the reliability of the ISO-controlled grid, market participants request permission and receive approval for planned outages from the independent system operator (ISO) in competitive electricity markets. In the face of major generation outages, the ISO will make a critical decision as regards the scheduling of the essential maintenance for myriads of generating units over a fixed planning horizon in accordance with security and adequacy assessments. Mainly, we are concerned with a fundamental framework for ISO's maintenance coordination in order to determine precedence of conflicting outages. Simulated annealing, a powerful, general-purpose optimization methodology suitable for real combinatorial search problems, is used. Generally, the ISO will put forward its best effort to adjust individual generator maintenance schedules according to the time preferences of each power generator (GENCO) by taking advantage of several factors such as installed capacity and relative weightings assigned to the GENCOs. Thus, computer testing on a four-GENCO model is conducted to demonstrate the effectiveness of the proposed method and the applicability of the solution scheme to large-scale maintenance scheduling coordination problems.

• 소성∙가공
• /
• 제18권8호
• /
• pp.625-632
• /
• 2009

The influence of the subsequent-annealing(SA) temperature on the plasma electrolytic oxidation(PEO)-treated Mgbased alloy was investigated in terms of surface properties associated with hardness and corrosion. For this purpose, a series of the SA treatments were performed on the PEO-treated samples at four different temperatures, i.e., 100, 150, 200, and $250^{\circ}C$ for 10 hrs. When compared to the sample without SA, the samples annealed at temperatures higher than $200^{\circ}C$ showed a difference in surface morphology due to the volume expansion accompanied by the dehydration reaction where the part of $Mg(OH)_2$ changed into MgO, working as harder phase. From the results of nano-indentation tests, the applied loads of the samples were seen to increase with increasing SA temperatures. However, the electro-chemical and corrosion properties of the sample annealed at $150^{\circ}C$ were higher than those of the samples annealed at three temperatures.

• 공업화학
• /
• 제27권4호
• /
• pp.402-406
• /
• 2016

전도성 고분자인 PEDOT/PSS의 열적 안정성을 검토하기 위하여 바인딩 물질 없이 캐스팅하는 방법에 의해서 필름을 제조하고, $200^{\circ}C$에서 annealing하면서 표면저항의 변화를 검토하였다. PEDOT/PSS 필름은 열처리에 의해서 전기적 특성이 향상되었으며, 2 h 정도에서 최대 전도도값($540S{\cdot}m^{-1}$)을 나타내어 초기 값($180S{\cdot}m^{-1}$)에 비해서 3배 정도 높아졌다. 그러나 시간이 지남에 따라 전기전도도가 떨어지고, 24 h이 지난 이후에는 거의 전기적 특성을 나타내지 않았다. 한편, 산화 그래핀(GO)과 복합화한 PEDOT/PSS 필름에서는 열처리에 의한 전기적 특성의 향상이 더 뚜렷하였으며, $200^{\circ}C$에서 30 h 이상 보관하더라도 전기전도도가 $600S{\cdot}m^{-1}$ 정도를 유지하는 것으로 나타나, GO와의 복합화가 PEDOT/PSS의 열적 안정성을 현저하게 향상시키는 것을 확인할 수 있었다.

• 분석과학
• /
• 제6권2호
• /
• pp.217-223
• /
• 1993

저항가열식 진공중착기를 이용하여 실온(ambient temp.)과 $250^{\circ}C$에서 알루미나 기판 위에 Au/Cr, Au/Ni/Cr 및 Au/Pd/Cr 박막을 제조하였으며, 공기 중에서 $300^{\circ}C$, $450^{\circ}C$, $600^{\circ}C$의 온도로 각각 1시간 동안 열처리하였다. Au, Ni(또는 Pd) 및 Cr 박막의 두께는 각각 $1000{\AA}$, $300{\AA}$, 및 $50{\AA}$이었다. 박막 제조시 기판의 온도와 박막 제조 후 열처리 온도는 각 층의 상호확산으로 인하여 박막의 면저항값에 영향을 주었다. Auger depth profile 분석결과, Au/Cr 시스템에서는 기판의 온도는 $250^{\circ}C$로 하여 박막을 제조할 때 이미 Cr은 Au 표면으로 확산되었으며, 열처리 후에는 Au의 분포도만 변화하였다. Au/Ni/Cr과 Au/Pd/Cr 시스템의 경우 Ni와 Pd 모두 확산현상이 발견되었으며, 특히 Ni(약 45 at.%)는 Au 박막 표면으로 확산되어 산화되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1272_1274
• /
• 2009

$MgF_2$ is a current material for the optical applications in the UV and deep UV range. Process variables for manufacturing the $MgF_2$ thin film were established in order to clarify optimum conditions for growth of the thin film depending upon process conditions, and then by changing a number of vapor deposition conditions and substrate temperature, Annealing conditions variously, structural and Optical characteristics were measured. Thereby, optimum process variables were derived. Nevertheless, modern applications still require improvement of the optical and structural quality of the deposited layers. In the present work, the composition and microstructure of $MgF_2$ single layers grown on slide glass substrate by Electro beam Evaporator(KV-660) processes, were analyzed and compared. The surface Substrate temperature having an effect on the quality of the thin film was changed from 200[$^{\circ}C$] to 350[$^{\circ}C$] at intervals of 50[$^{\circ}C$]. and annealing temperature an effect on the thin film was changed from 200[$^{\circ}C$] to 400[$^{\circ}C$] at intervals of 50[$^{\circ}C$]. Physical properties of the thin film were investigated at various fabrication conditions substrate temperature, annealing and temperature, annealing time by XRD, FE-SEM.

• 한국자기학회지
• /
• 제24권6호
• /
• pp.186-190
• /
• 2014

뫼스바우어 선원 $^{57}Co/Cu$의 제조조건을 도출하기 위하여, 금속 분말 코발트(Co)를 황산에 용해시킨 후 $H_3BO_3$, KOH와 NaCl을 첨가하여 Sulfamate 도금용액을 제조 후 Cu plate 기판에 도금하였다. 도금두께는 $4{\mu}m$로 일정하게 유지하였다. 전류밀도를 $2mA/cm^2$와 $30mA/cm^2$로 유지하면서 pH에 변화를 준 결과 pH가 4 이상으로 증가하면 hcp 결정의 Co 금속 이외의 2차상이 생성되었다. pH가 증가할수록 Co 후막 표면이 거칠어 졌으며 균열된 표면형상을 관찰하였다. pH가 5까지 증가할 경우 평균입도는 54 nmfh 증가함을 확인하였다. 열처리조건을 변화시키면서 Co가 Cu기지 내에 구속되는 온도가 $900^{\circ}C$에서 2 h임을 확인하였다. 열처리는 진공 후 Ar 분위기(1.5 l/min)를 유지하면서 수행하였다.

• Journal of Information Display
• /
• 제2권2호
• /
• pp.52-60
• /
• 2001

The electrical and mechanical properties in indium-tin-oxide films deposited on polymer substrate were examined. The materials of substrates were polyethersulfone (PES) which have gas barrier layer and anti-glare coating for plastic-based devices. The experiments were performed by rf-magnetron sputtering using a special instrument and buffer layers. Therefore, we obtained a very flat polymer substrate deposited ITO film and investigated the effects of buffer layers, and the instrument. Moreover, the influences of an oxygen partial pressure and post-deposition annealing in ITO films deposited on polymer substrates were clarified. X-ray diffraction observation, measurement of electrical property, and optical microscope observation were performed for the investigation of micro-structure and electro-mechanical properties, and they indicated that as-deposited ITO thin films are amorphous and become quasi-crystalline after adjusting oxygen partial pressure and thermal annealing above $180^{\circ}C$. As a result, we obtained 20-25 ${\Omega}/sq$ of ITO films with good transmittance (above 80 %) of oxygen contents with under 0.2 % and vacuum annealing. Furthermore, using organic buffer layer, we obtained ITO films which have a rather high electrical resistance (40-45 ${\Omega}/sq$) but have improved optical (more than 85 %) and mechanical characteristics compared to the counterparts. Consequently, a prototype reflective color plastic film LCD was fabricated using the PES polymer substrates to confirm whether the ITO films could be realized in accordance with our experimental results.

• 한국표면공학회지
• /
• 제51권4호
• /
• pp.191-196
• /
• 2018

The self-annealing which leads evolution of microstructure in copper electroplating layers at room temperature occurs after forming deposition layer. During the process, crystal orientation, size and sheet resistance of plating layer change. Lastly, it causes the change of physical and mechanical characteristics such as a tensile strength of plating layer. In this study, the variation of incorporated impurities, microstructure and sheet resistance of copper plating layer formed by electroplating are measured with and without inorganic additives during the self-annealing. In case of absence of inorganic additives, the copper layer presents strong total intensity of incorporated impurities. During the self-annealing, such width of reduction was significant. Moreover, microstructure and crystal size are increased while the tensile strength is decreased noticeably. On the other hand, in the presence of inorganic additives, there is no observable distinction in the copper plating layer. According to the observation on movements of the incorporated impurities in electrodeposition copper layer, within 12 hours the impurities are continuously shifted from inside of the plating layer to its surface after as-deposited electroplating. Within 24 hours, except for the small portion of surface layer, it is considered that most of the microstructure is transformed.

• Applied Microscopy
• /
• 제45권2호
• /
• pp.95-100
• /
• 2015

The in-situ heating transmission electron microscopy experiment allows us to observe the time- and temperature-dependent dynamic processes in nanoscale materials by examining the same specimen. The temperature, which is a major experimental parameter, must be measured accurately during in-situ heating experiments. Therefore, calibrating the thermocouple readout of the heating holder prior to the experiment is essential. The calibration can be performed using reference materials whose phase-transformation (melting, oxidation, reduction, etc.) temperatures are well-established. In this study, the calibration experiment was performed with four reference materials, i.e., pure Sn, Al-95 wt%Zn eutectic alloy, NiO/carbon nanotube composite, and pure Al, and the calibration curve and formula were obtained. The thermocouple readout of the holder used in this study provided a reliable temperature value with a relative error of <4%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.62-65
• /
• 2005

We studied the nematic liquid crystal (NLC) alignment capability by the Ultraviolet (UV) alignment method on a-C:H thin-films, and investigated electro-optical performances of the UV aligned twisted nematic (TN)-liquid crystal display (LCD) with the UV exposure on a-C:H thin film surface. A good LC alignment by UV irradiation on a-C:H thin-film surfaces was achieved. Monodomain alignment of the UV aligned TN-LCD can be observed. The good electro-optical (EO) characteristics of the UV aligned TN-LCD was observed with oblique UV exposure on the a-C:H thin film surface for 1min.