• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.5-6
• /
• 2000

Fringe-field switching (FFS) technology exhibiting a high image quality has been developed. In this paper, one pixel concept, manufacturing process, materials, and electro-optic characteristics of FFS mode comparing with conventional in-plane switching mode, and its possible application to reflective type will be discussed.

• The Journal of Korea Robotics Society
• /
• v.8 no.3
• /
• pp.156-163
• /
• 2013

This paper describes a flexible visuo-haptic display module. We have developed a flexible electro-active polymer (EAP) actuator and a thin flexible visual display with $3{\times}3$ array configuration via polymer technology. The flexible actuator consists of nine EAP cells vertically moving in response to change in their thickness. The flexible display uses polymer based optical waveguide allowing light to scatter only at specific area. The display film is transparent and identically designed to the array pattern to fit for the arrangement of actuator cells. A pressure sensor is installed under the integrated module. The performance of the actuator is proved to be sufficient for satisfying perceivable range of human touch sense. The integrated system can provide interactive haptic feedback such as key pressing, contact vibration sensations, and etc. in accordance with user input.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1087-1090
• /
• 2008

This paper presents the electro-luminescence (EL) display lamp which is patterned on a curved surface by the pad printing method. The printing methods, including the gravure, screen, flexo, inkjet, and pad printing, have an advantage of one-step direct patterning. However, in general, the printing and semi-conductor process, except pad printing method, cannot be applied for patterning on a curved surface. Thus, in this paper, we used pad printing method for patterning an EL display lamp on a curved surface. The EL display lamp consists of 5 layers: Bottom electrode; Dielectric layer; Phosphor; Transparent electrode; Bus electrode. Finally, we printed EL display lamp on a dish, which has a radius of curvature 80mm. The EL display lamp was driven at AC 200V of 1kHz.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.142-146
• /
• 2007

Nowadays, itis inevitable trend to use high Xe gas contents for increase luminous efficiency and luminance in plasma display panel. However, the increase of Xe gas contents causes the driving voltage, although the brightness is increase. In this paper, we study the characteristics of electro optical according to Xe gas contents and gas pressure. Electro-optical characteristics were investigated by the discharge voltage, luminance and luminous efficacy measurements, respectively. With some increasing Xe gas contents and pressure, the electro-optical properties increased. However, the characteristics of electro-optical begin to be saturated, when too high increased Xe gas contents and pressure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1422-1424
• /
• 2007

A simulation method has been purposed in this paper to optimize the stack structure of metal/ITO cathode for full transparent or top emission devices. The result demonstrates that the complexity of the two proper layers thicknesses design is reduced. Finally, the experiment data also strain the simulation result.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.980-983
• /
• 2006

New blue light emitting branched molecules were synthesized by reacting 3,5-bis-(3,5-bis-benzyloxy)- benzoic moiety or 3,5-bis-(3,5-bis-benzyloxy-benzyloxy)- benzoic moiety with biscarbazolyl vinyl biphenyl moiety by dicyclohexylcarbodiimide (DCC) catalyzed esterification. Similar synthetic strategy was also applied to prepare a red light emitting dendrimer. In this paper, we described two blue emitting dendrimers for investigating the effect of the dendronized structures on photoluminescence (PL) and electroluminescence (EL). EL properties of the dendrimers were investigated using heterostructured samples in detalil.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1809-1812
• /
• 2006

In this paper, the thermally evaporated molybdenum oxide $(MoO_x)$ is investigated as the effective hole-injection material for organic lightemitting devices (OLEDs). The use of $MoO_x$ significantly lowers the operating voltage of OLEDs, insensitive to the anode materials used.

• Journal of Information Display
• /
• v.1 no.1
• /
• pp.9-13
• /
• 2000

In liquid crystal displays, the display mode that represents initial liquid crystal alignment and method of applying voltage, mainly determines the image quality of display. Recently we have developed the fringe-field switching (FFS) mode exhibiting high image quality. In this paper, a pixel concept, manufacturing process, materials, and electro-optic characteristics of the FFS mode comparing with conventional in-plane switching mode, and its possible application to reflective type are discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.422-425
• /
• 2006

Recently, studies on orientation of carbon nanotubes (CNTs) dispersed in nematic liquid crystal (LC) and CNTs effects on electro-optic characteristics of the LC device have been performed. In this paper, we summarize interaction nature between CNT and LC, local distortion of the LC director field by motion of CNTs, and effects on electro-optic performances of LC device.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.101-104
• /
• 2005

Recently, competition between LC modes for LC TVs becomes high. In this paper, status of each mode is briefly reviewed with commenting on its electro-optic characteristics and possible application fields. Further, to understand effects of carbon nanotubes (CNTs) dispersed in nematic liquid crystal on electro-optic characteristic and orientation of the LC, CNT-doped NLC cells are made and evaluated. The hysterisis studies of voltage-dependent capacitance show that the amount of residual dc is greatly reduced due to ion trapping by CNTS.