• 유공압시스템학회논문집
• /
• 제2권3호
• /
• pp.1-5
• /
• 2005

There are two types of solenoid actuator for force and position control of the fluid power system. One is an on-off solenoid actuator and the other is an electro-magnetic proportional actuator. They have some different characteristics for attraction force according to solenoid shape. Attraction force of the on-off solenoid actuator only depends on flux density. And the stroke-force characteristics of the proportional solenoid actuator are determined by the shape of the control cone. In this paper, steady state characteristics of the solenoid actuator for electro-hydraulic proportional valve determined by the shape of control cone are analyzed using finite element method and it is confirmed that the proportional solenoid actuator has a constant attractive force in the control region independently on the stroke position. And the shape of control cone is optimized using 1+1 evolution strategy to get a constant force. In the optimization algorithm, control cone length, thickness and taper length are used as a design parameter.

• Progress in Superconductivity
• /
• 제13권1호
• /
• pp.52-57
• /
• 2011

A superconductor flywheel energy storage system (SFES) is an electro-mechanical battery which transforms electrical energy into mechanical energy for storage, and vice versa. The 35 kWh class SFES is composed of a main frame, superconductor bearings, electro-magnetic dampers, a motor/generator, and a composite flywheel. The energy storing capacity of the SFES can be limited by the operational speed range of the system. The operational speed range is limited by many factors, especially the resonant frequency of the main frame and flywheel. In this study, a steel frame has been designed and constructed for a 35 kWh class SFES. All the main parts, their housings, and the flywheel are aligned and assembled on to the main frame. While in operation, the flywheel excites the main frame, as well as all the parts assembled to it, causing the system to vibrate at the rotating speed. If the main frame is excited at its resonant frequency, the system will resonate, which may lead to unstable levitation at the superconductor bearings and electro-magnetic dampers. The main frame for the 35 kWh class SFES has been designed and constructed to improve stiffness for the stable operation of the system within the operational speed range.

• Progress in Superconductivity
• /
• 제14권1호
• /
• pp.60-65
• /
• 2012

A superconductor flywheel energy storage system (SFES) is an electro-mechanical battery which transforms electrical energy into mechanical energy for storage, and vice versa. A 35 kWh class SFES module was designed and constructed as part of a 100kWh/1MW class SFES composed of three 35 kWh class SFES modules. The 35 kWh class SFES is composed of a main frame, superconductor bearings, a composite flywheel, a motor/generator, electro-magnetic bearings, and a permanent magnet bearing. The high energy density composite flywheel is levitated by the permanent magnet bearing and superconductor bearings, while being spun by the motor/generator, and the electro-magnetic bearings are activated while passing through the critical speeds. Each of the main components was designed to provide maximum performance within a space-limited compact frame. The 35 kWh class SFES is designed to store 35 kWh, with a 350 kW charge/discharge capacity, in the 8,000 ~ 12,000 rpm operational speed range.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.971-975
• /
• 2005

In this study, a car-door-controlled collision protection system using proximity sensor is proposed and its preliminary analysis and several preliminary experiments are conducted. The proposed system has three additional sub-components on the car-door that is, a pair of extra electro-magnetic actuator that are attached to the sliding bar of the open/close car-door four-bar mechanism, a proximity sensor that would be attached to the outside surface of the door which is likely to frequently contact to the object and a driving control circuit of the whole system. A proximity sensor is used to detect object close to the car-door, the driving control circuit provides actuating power command to the electro-magnets to generate braking force to stop the swing motion of the car-door. It is verified through kinematic analysis of the four-bar car-door open/close mechanism and through experiments that the magnitude of maximum electronic magnetic force could provide the braking force enough for this application. For this purpose, an electro-magnet driving circuit is implemented and tested. And also to increase the safety of the system a time delay circuit is implemented and tested.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.15-18
• /
• 2008

To achieve high transport current without degradation under magnetic field, it is essential to artificially generate the pinning sites at which moving magnetic flux can be pinned. In this work, $ZrO_2$ nanodots were formed on the substrate surface using electro-spray deposition method. On top of the nanodots, the extended and effective pinning centers can be created. The positively charged Zr precursor solution was sprayed out from the needle using the corona discharge phenomena. Then, the sprayed precursor was deposited onto the negatively charged substrate surface followed by the heat treatment under the controlled atmosphere. Using the electrostatic force among the charged particles of precursor, evenly distributed and nano-sized dots were formed on the substrate surface. The size and density of the nanodots were studied by Atomic Force Microscopy. Also discussed are the effect of the deposition time and solution concentration on the size and density of the nanodot and processing variables in electro-spray method for the effective flux pinning centers in the superconducting films.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권4호
• /
• pp.24-27
• /
• 2023

Until now, many research activities have been conducted to commercialize high-temperature superconducting (HTS) wires for electric applications. Most of all researchers have focused on enhancing the piece length, critical current density, mechanical strength, and throughput of HTS wires. Recently, HTS magnet for generating high magnetic field shows degraded performance due to the deformation of HTS wire by high electro-magnetic force. The deformation can be derived from widthwise thickness non-uniformity of HTS wire mainly caused by wet processes such as electro-polishing of metal substrate and electro-plating of copper. Gradient sputtering process is designed to improve the thickness uniformity of HTS wire along the width direction. Copper stabilizing layer is deposited on HTS wire covered with specially designed mask. In order to evaluate the thickness uniformity of HTS wire after gradient sputtering process, the thickness distribution across the width is measured by using the optical microscope. The results show that the gradient deposition process is an effective method for improving the thickness uniformity of HTS wire.

• 한국산학기술학회논문지
• /
• 제18권9호
• /
• pp.52-60
• /
• 2017

본 논문은 탄성지반위에 놓인 비국소 자기-전기-탄성 나노 판의 구조안정에 관하여 1차 전단변형이론을 이용하여 분석하였다. 4변이 단순지지된 자기-전기-탄성 나노 판의 좌굴하중을 구하기 위하여 Navier 방법을 적용하였다. 기존의 연구들에서는 2방향 좌굴해석은 거의 연구되지 않았다. Maxwell 방정식과 자기-전기 경계조건에 따라 자기-전기-탄성 나노 판의 두께 방향에 따른 자위 및 전위의 변화가 결정된다. 자기-전기-탄성 나노 판의 탄성이론을 재 공식화하기 위하여 Eringen의 비국소 미분 구성 관계식을 사용하였고 변분이론을 이용하여 비국소 탄성이론의 지배방정식을 연구하였다. 탄성지반의 효과는 Pasternak의 가정을 적용하였다. 비국소 이론과 국소 이론의 관계를 계산 결과를 통하여 분석하였다. 또한, 전위 및 자위의 크기, 비국소 매개변수, 탄성지반 매개변수 그리고 폭-두께 비에 따른 구조적 안정문제를 연구하였다. 분석 결과들은 전위 및 자위의 효과를 나타내었다. 이러한 계산 결과들은 자기-전기-탄성 재료로 구성된 신소재 구조물에 관한 향후 연구의 비교자료가 될 수 있을 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.563-566
• /
• 1992

Recently, a lot of efforts have been made to satisfy noise and vibration performance requirements of rotating electric precision machines by the use of various numerical techniques. This paper looks into the enfluence of the magnetization pattern and the shape of air gap which play the role of primary variables of the electro-magnetic circuits, and finally, an experimental verification has been performed to illustrate the efficiency and the advantages or the optimal air gap shape minimizing the cogging torque.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.629-631
• /
• 2001

중저압 분야에서 가장 많이 사용되는 차단기는 진공차단기이다. 진공차단기는 $SF_6$에 비하여 간단하며, 아크소호 능력 또한 뛰어나다. 이런 진공차단기에서 차단성능에 가장 중요한 부분이 진공차단부이다. 본 논문에서는 constricted arc와 diffuse arc에 관하여 서술하였으며, contrate type 진공차단부의 다양한 형상변경에 따른 직교자계와 축자계에 대한 3차원 전자계 해석을 수행하였다. 3차원 전자계해석으로 얻어진 결과는 새로운 진공차단부 개발에 커다란 도움이 될 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.301-304
• /
• 2001

This paper considers the research of the hybrid interrupter which adopts both rotating arc and thermal expansion technology. The operating principle of this device defends on rapid arc rotation due to the magnetic field created by the fault current through a coil which is mounted on contacts and also relies on the principle of thermal expansion created by arc energy in extinguishing chamber and finally causes pressure rise in expansion volume. In this research, the principle of the interrupting techniques are given and experimental results of hybrid interrupter which is developed by new technology is introduced.