• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.5
• /
• pp.355-364
• /
• 2009

Electro-Luminescence (EL) sheets have been widely used in lighting displays, mainly used as advertisement panels. To drive the ELs in optimal conditions, it is required to understand the load profile of the EL. Hence, in this paper, a modeling for an EL sheet was performed to analyze the load characteristics of the EL. Based on the extracted model of the EL, a topology for inverter system was chosen and the optimal design parameters were obtained. The validity of the designed EL driver system was verified through computer simulations and experiments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.274-275
• /
• 2006

A new thin film materials can be built up at the molecular level, and the relationship between these artificial structures and the properties of materials can be explored. In this paper, in order to confirm the application possibility to the molecular electronic device of the organic materials, we have investigated electro-luminescent (EL) characteristics of organic EL device using $Alq_3$, PBD as emitting material. Current and luminance can be seen that express a similar relativity in voltage and could know that luminance is expressing current relativity.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.165-169
• /
• 2007

Organic EL has been expected to adopt to a new styles of technology that make flat display after Tang & Vanslyke made food electric luminescence device in late 1980s. Their studies based on multi layer structure that consists of emitting layer and carrier transporting layer using proper organic material. In this study we made multi layer device using $Eu(TTA)_3(phen)$ as a luminescence material by PVD and investigate luminous properties of each device. But oxidization of organic layer by ITO, energy walls in both pole interface, contaminations of ITO surface, importance of protecting membrane, diffusive dimming of light to cathode organic layer, these causes of degradations are common facts of a macromolecule and micromolecule. We think these degradation caused by the impact of heat and electro-chemical factor, bulk effect and interface phenomenon, and raise a question.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.713-716
• /
• 2007

This paper presents the fabrication of an electro-luminescence display, which is whollyprinted on a flexible paper substrate. We expect that the printed EL display can be a powerful alternative for general advertisement which is printed only with media ink.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.187-187
• /
• 2010

현대의 전기전자 기술의 발전속도가 급격히 빨라짐에 따라서 디지털 전자기기는 많은 데이터와 빠른 전송속도가 요구되어지고 있으며 이로 인해 예상치 못한 고주파 노이즈 신호의 문제가 심각해지고 있다. 최근 디지털 전자기기 중 디스플레이 표시장치에서 구동전압 인가 시 발생하는 근역장 방사노이즈가 문제가 되고 있고, 정전용량방식 (Capacitive Overlay)Touch Pannel에서 터치 시 오작동을 일으키는 EL 면광원의 EMI(Electro-Magnetic Interference, 전자방해)가 본 연구에서 해결하고자 하는 문제이다. EL 면광원의 구동전압이 증가함에 따라서 Touch Panel에 인가되는 근역장 방사노이즈의 세기를 측정하였고 근역장 방사노이즈를 감쇄할 수 있는 Flexible한 자성복합시트에 대해서 연구하였다. EL Display Pannel에 Flexible한 자성 복합시트를 채용하여 Flexible Display 장비의 근역장 방사노이즈 감쇄에 효과가 있음을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.623-625
• /
• 2004

In Electro-Luminescence Display making process, it is necessary to do high molecule patterning effectively. Recently, one of the most effective way is the patterning method using Ink-Jet head controller. To maximize the effect, it is needed to control each channel of Ink-Jet head and develop that controller. Thus, we implement the Ink-Jet Head Controller which can control the parameters of 128 fire pulses independently, improve the accuracy of patterns more than 100 times previous ones, and apply random patterns.

• Proceedings of the KIEE Conference
• /
• 2005.10a
• /
• pp.82-85
• /
• 2005

Organic EL has been expected to adopt to a new styles of technology that make flat display after Tang & Vanslyke made good electric luminescence device in late 1980s. Their studies based on multi layer structure that consists of emitting layer and carrier transporting layer using proper organic material. In this study, we made multi layer device using $Eu(TTA)_3(phen)$ as a luminescence material by PVD and investigate luminous properties of each device. But oxidization of organic layer by ITO, energy walls in both pole interface, contaminations of ITO surface, importance of protecting membrane, diffusive dimming of light to cathode organic layer, these causes of degradations are common facts of a macromolecule and micromolecule. We think these degradation caused by the impact of heat and electro-chemical factor, bulk effect and interface phenomenon, and raise a question.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1087-1090
• /
• 2008

This paper presents the electro-luminescence (EL) display lamp which is patterned on a curved surface by the pad printing method. The printing methods, including the gravure, screen, flexo, inkjet, and pad printing, have an advantage of one-step direct patterning. However, in general, the printing and semi-conductor process, except pad printing method, cannot be applied for patterning on a curved surface. Thus, in this paper, we used pad printing method for patterning an EL display lamp on a curved surface. The EL display lamp consists of 5 layers: Bottom electrode; Dielectric layer; Phosphor; Transparent electrode; Bus electrode. Finally, we printed EL display lamp on a dish, which has a radius of curvature 80mm. The EL display lamp was driven at AC 200V of 1kHz.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.110-113
• /
• 2002

Organic EL has been expected to adopt to a new styles of technology that make flat display after Tang & Vanslyke made good electric luminescence device in late 1980s. Their studies based on multi layer structure that consists of emitting layer and carrier transporting layer using proper organic material. In this study. we made multi layer device using $Eu(TTA)_3(phen)$ as a luminescence material by PVD and investigate luminous properties of each device. But oxidization of organic layer by ITO. energy walls in both pole interface. contaminations of ITO surface, importance of protecting membrane, diffusive dimming of light to cathode organic layer. these causes of degradations are common facts of a macromolecule and micromolecule. We think these degradation caused by the impact of heat and electro-chemical factor, bulk effect and interface phenomenon. and raise a question.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.75-76
• /
• 2007

ZnS:Cu,Cl phosphor was coated by solid-gel reaction with $SiO_2$ outside layer. The effect of $Cu^{2+}$-doping concentration has been investigated on the luminescence characteristics of ZnS:Cu,Cl blue-green phosphors for inorganic electro luminescent device. Also, SiO2 coated layers' effect on luminescence characteristics. Evaluation of luminescence characteristics dependent on the synthesis conditions is important to get high-performance phosphors properties. EL and PL properties such as luminescence intensity and chromaticity of ZnS:Cu,Cl phosphors synthesized with different concentration of activator, $Cu^{2+}$, were analysed separately