• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1257-1259
• /
• 2001

In this paper, the diagnosis method for AC traction motor is to reduce their maintenance loads. We tried to apply this method to maintenance of traction motor in railway vehicle. Sample coils for stator of traction motor were tested by accelerative thermal degradation which composed of heat, vibration, moisture, and overvoltage applying. Reliability and expected life were evaluated on the insulation system for 200 class traction motor.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.782-787
• /
• 2005

Magnitude of generated harmonic currents along with the operation of AC traction has nonlinear characteristics, and generated harmonic currents for high speed traction are more and more in high speed railroad(HSR) systems, especially. This paper presents probabilistic approximation method for the harmonic currents analysis about the operating speed of AC traction. To use probabilistic method for HSR system, probability density function(PDF) for collected operating speed based measure data is calculated. Mean and variance of harmonic currents of single traction are obtained based on the operating speed PDF and electrical traction model. The results of Monte Carlo Simulation(MCS) are in well accordance with the experimental and analytic methods. The harmonics of different number of trainloads are systematically investigated. It is assessed by the total demand distortion(TDD) for the HSR system.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2006-2010
• /
• 2008

This paper deal with the improvement performance and test result of traction motor for Bimodal low floor vehicles that are CNG(Compressed Natural Gas) hybrid bus. The improvement performance concept of the traction motor is studied in terms of electrical characteristics and mechanical construction. Finally, this paper introduces the result of the traction motor test for low floor vehicles, and mentioned the detail design concept of traction motor.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1376-1378
• /
• 2004

When an underground pipeline runs parallel with DC traction systems, it suffers from DC traction interference. Because the train is fed by the substation through the overhead wire and return current back to the substation via the rails. If these return rails are poorly insulated from earth, DC current leak into the earth and can be picked up by nearby pipeline. It may bring about large-scale accidents even in cathodically protected systems. In this paper we analyze the cathodic protection systems of buried pipelines and DC traction stray current influence on it using the simulation software CatPro. We can discuss the problems and mitigation of DC traction interference for protected pipeline.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1291-1293
• /
• 2003

The korean high speed train (350km/h), composed of 7cars that are 2 power cars, 2 motorized car and 3 trailer cars, has been developed and is under on-line test. To verify the design requirements about the functions and traction performances of this train, KRRI(Korea Railroad Research Institute) decided to evaluate traction performances of the train during on-line test. For this purpose, such as torque, velocity, voltage and current, must be measured. KRRI has developed the measurement system that can be measured vast and various signals effectively. In this paper, we introduce traction performances of korean high speed train. The traction measurement items are focused on the verification of motor block performances. Motor block are consist of 2 motor. For this test, we verified traction performances of korean high speed train.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.950-954
• /
• 1998

This paper describes a development of traction unit for 2-motor driven electric vehicle (EV). The traction unit is consisted with an interior permanent magnet synchronous motor (IPMSM), a reduction gear and an inverter for electric vehicle that is driven by 2 motors without differential gear. For traction unit, prototype IPMSM and inverter have been developed. The IPMSM was designed by CAD program that was developed with both equivalent circuit method and FEM. Also the inverter was developed to drive 2 motors with 6 legs IGBT switches in a control board. The vector control algorithm was implemented with maximum torque control method in the constant torque region and field weakening control method in the constant power region considering inverter capacity. To verify that the traction unit is more high efficiency and has more high power density than a traction unit with induction motor with the same power, we would like to show the results about the design and analysis of the IPMSM and the experiment results about the traction unit.

• International Journal of Railway
• /
• v.3 no.2
• /
• pp.54-59
• /
• 2010

In order to develop the deep-underground GTX (Great Train eXpress) in domestic, the running performance analysis of the propulsion system by a variety of route condition must be carried out before studying the specification and the development of the high-speed propulsion system with inverter and traction motor. Then it is necessary to study the running resistance properties of the high-speed traction system for the variety of tunnel type and vehicle organization method at first. In addition, the properties of the power requirement of the traction motors needed to maintain the balanced speed of the high-speed traction system are next studied. We need to study properties of the emergency braking distance caused by the highest operation speed of the high-speed traction system and present the fundamental design technologies to develop the high-speed traction system for the deep-underground GTX. Finally, the paper analyzes the applicability of the conventional Korean Tilting Train eXpress (TTX) propulsion system on the high-speed propulsion system for the deep-underground GTX.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.164-168
• /
• 2005

In this paper a statcom is developed to improve the power quality in a dc traction system. The proposed statcom can be used as both inverter and active filter. As an active filter, it can compensate harmonic distortion and reactive power and as an inverter, it can recycle regenerative energy caused by decelerating trains. The simulation results are carried out by using PSCAD/EMTDC software.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.361-363
• /
• 1997

Rated frequency of inverter driven induction motor for a traction system can be chosen lower or higher. Traction motor with higher rated frequency can be lighter than the lower. But the maximum torque must be checked, because it is very important for starting and acceleration and it should be reduced with high frequency operation. In the paper, two motors with different rated frequency are designed and compared.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.458-460
• /
• 1999

In this paper, the results of FEM electromagnetic analysis performed in the standardization development of traction motor for EMU are reviewed. The selection of optimal design parameter and performance analysis are proven through the complement of the circuit parameters on the basis of Performance test for developed traction motor.