• 대한전자공학회논문지TE
• /
• 제37권2호
• /
• pp.1-5
• /
• 2000

금속이온 농도를 변화시켰을때의 IMI-O 고분자 LB막에 대한 단분자막의 거동과 MIM구조의 LB막 소자에 대한 전기 특성 및 유전 특성을 조사하였다. π-A 등온선의 측정에서 금속 이온 농도가 증가함에 따라 단분자가 차지하는 극한 단면적이 증가하였다. 이러한 변화는 금속이온 농도 변화에 따른 금속이온의 강도 증가에 의한 단분자막의 거동의 차이에 의한 것으로 생각된다. 전압-전류 특성에서 ohmic 영역의 기울기로부터 구한 전기전도도는 금속 이온의 농도가 증가할 수록 증가하였다. 이것은 전개분자와 금속이온간의 결합에 의한 극한 단면적의 변화가 전기전도도에 직접적인 관계가 있기 때문으로 생각된다. 한편, 유전 특성에서 금속이온의 농도가 증가할 수록 허수부 유전율이 최대가 되는 주파수 역시 증가하였다. 따라서 금속이온의 증가에 의해 완화시간 γ가 감소되는 것을 알 수 있었다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권11호
• /
• pp.601-611
• /
• 2002

As resent trends in structural construction have been to build taller and larger structures than any time in the past, they have had high flexibility and low damping that can cause large vibration response under severe environmental loading such as earthquakes, winds, and mechanical excitations. The damper with mass and sqring is one aproach to safeguarding the structure against excessive vibrations. In this paper, a large capacity hybrid-type linear motor damper(LMD) was designed and fabricated for the application to the vibration control of a large building structure model. It has been designed to be able to move the damper mass, 1,500 kg up to ${\pm}250mm$ strokes at the first mode natural frequency of the building structure model, ${\pm}0.51Hz$. Linear motor is consisted of the fixed coil and the movable NdFeB permanent magnets field part. The PM field part composed magnet modules and iron yoke, is the damper mass itself, 1500kg. LMD therefore has a simplified structure and requires a few elements in the driving system, being compared with a rotary motor damper and a hydraulic damper. However, the manufacture of large PM linear actuator is difficult because of the limit of PM size and the attraction and repulsion at the assembly of PM. Therefore, large damper system is manufactured and tested for dynamic characteristics and frequency response.

• 한국의류학회지
• /
• 제19권5호
• /
• pp.765-773
• /
• 1995

Effect of interfacial electrical conditions such as, the f potential of PET fiber and u-Fe203 particles, the stability parameter and potential energy of interaction on adhesion of a-Fe903 particles to PET fabric and their removal from the fabric, were investigated as functions of pH, electrolyte and ionic strength. The stability parameter, potential energy of interaction between a-Fe2O3 particles and PET fabric were calculated by using the heterocoagulation theory for a sphere-plate model The adhesion of a-Fe2O3 particles to PET fabric and their removal from PET fabric were carried out by using water bath shaker and Terg-O-Tometer under various solution conditions. The adhesion of a-Fe2O3 particles to the PET fabric and the removal of a-Fe2O3 particles from the PET fabric were biphasic and were maximum and minimum at pH 7~8, respectively. With high pH and polyanion electrolytes in solution, the adhesion of a-Fe2O3 particles to the PET fabric was low but effects of electrolytes on the removal of a-Fe2O3 particles from the PET fabric was small. The adhesion of a-Fe2O3 particles to the PET fabric and the removal of a-Fe2O3 Particles from the PET fabric were biphasic, and were lowest and highest at the ionic strength 1$\times$10-3, respectively. The adhesion of a-Fe2O3 particles to PET fabric was well related with the interfacial electrical conditions; it was negatively correlated with the f potentials of a-Fe2O3 Particles of its absolute value, the stability parameter and the maximum of total potential energy, while, the adhesion was not related with the t potentials of PET fiber itself. Therefore, the primary factor determining the adhesion of a-Fe203 particles to PET fabric may be the stability of dispersed particles caused by the electrical repulsion of particles. The removal of a-Fe203 particles from PET fabric was not related to such interfacial electrical conditions as the t potentials of PET fiber, the stability parameter and the maximum of total potential energy but removal was related to t potential of a-Fe203 particles.

• 대한기계학회논문집B
• /
• 제21권8호
• /
• pp.1068-1076
• /
• 1997

Emission control of acid exhaust gases from coal-fired power plants and waste incinerators has become an increasing concern of both industries and regulators. Among those gaseous emissions, SO$_{2}$ has been eliminated by a Spray Drying Absorber (SDA) system, where the exhaust gas is mixed with atomized limestone-water slurry droplets and then the chemical reaction of SO$_{2}$ with alkaline components of the liquid feed forms sulfates. Liquid atomization is necessary because it maximizes the reaction efficiency by increasing the total surface area of the alkaline components. An experimental study was performed with a laboratory scale SDA to investigate whether the scrubbing efficiency for SO$_{2}$ reduction increased or not with the application of a DC electric field to the limestone-water slurry. For a selected experimental condition SO$_{2}$ concentrations exited from the reactor were measured with various applied voltages and liquid flow rates. The applied voltage varied from -10 to 10 kV by 1 kV, and the volume flow rate of slurry was set to 15, 25, 35 ml/min which were within the range of emission mode. Consequently, the SO$_{2}$ scrubbing efficiency increased with increasing the applied voltage but was independent of the polarity of the applied voltage. For the electrical and flow conditions considered a theoretical study of estimating average size and charge of the atomized droplets was carried out based on the measured current-voltage characteristics. The droplet charge to mass ratio increased and the droplet diameter decreased as the strength of the applied voltage increased.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.189-199
• /
• 2009

The Powder characteristics and sintering behavior of $SiO_2$ coated $BaTiO_3$ were studied. $BaTiO_3$ powders were synthesized by the liquid mix method developed by Pechini, and silica coating was prepared by alkoxide hydrolysis method with TEOS and ethanol. The particle size of the $BaTiO_3$ powders was 35 nm and the thickness of the $SiO_2$ coating layer was 5 nm. As the $SiO_2$ content increased, the $SiO_2$ layers improved the powder dispersion by increasing electrostatic repulsion between the $BaTiO_3$ particles. Effects of MgO coating on microstructure and dielectric properties of $BaTiO_3$ have been studied compared with mechanically MgO mixed $BaTiO_3$. MgO coated $BaTiO_3$ particles were prepared by a homogeneous precipitation method using $MgCl_2\cdot 6H_2O$ and urea. MgO coated $BaTiO_3$ exhibited homogeneous microstructure compared with mixed samples. XRD analysis revealed that Mg substitution for the Ti site in the MgO mixed sample was much greater than in the coated one. Electrical properties of MgO mixed and coated $BaTiO_3$ were affected by the diffusion behavior of Mg in $BaTiO_3$ lattice.

• 대한토목학회논문집
• /
• 제30권1C호
• /
• pp.7-15
• /
• 2010

폐기물 매립지에서 손상된 지오멤브레인 라이너에 의해 지층으로 오염물질의 침투가 유발된 경우, 환경적인 피해를 최소화 하기 위해서는 전기영동기법에 의한 지오멤브레인 라이너의 즉각적인 복구가 필요하다. 하지만 실제 매립장 침출수내에서 전기영동기법 적용시 침출수내 다양한 화학종과 점토입자와의 상호작용으로 인해 점토 입자들의 응집이 촉진되고, 전기영동적 이동보다 중력에 의한 침강거동이 우세하게 나타나며, 결국 실제 매립지 현장에 대한 전기영동기법의 적용상 한계점이 유발되었다. 이에 따라 본 연구에서는 점토입자의 응집을 최대한 방지시켜 전기영동력에 의한 입자의 개별적 이동이 유발될 수 있도록 전기영동 향상기법에 대한 1차원 실내실험을 수행하였다. 그 결과, PAA를 사용할 경우, 점토 끝단에 흡착된 폴리머의 전기적 척력효과로 인해 점토 입자의 분산화 효과가 증대되었다.

• Journal of Chest Surgery
• /
• 제32권11호
• /
• pp.989-997
• /
• 1999

Background: Calcific degeneration is the major cause of clinical failure of glutaraldehyde (GA) crosslinked bioprosthetic tissues implanted in the body and necessitates the reoperation or causes death. Surface modification of biologic tissues using sulfonated polyethyleneoixde (PEO-SO3) has been suggested to significantly enhance blood compatibility, biostability and calcification-resistance by means of the synergistic effect of highly mobile and hydrophilic PEO chains and electrical repulsion of negatively charged sulfonate groups. This study was designed to evaluate the anticalcification effect of surface-modification of biologic arteries by direct coupling of PEO-SO3 after GA fixation and changes of calcification according to the implantation period through the quantitative investigation of the deposited calcium and phosphorous contents of the biologic arterial tissues in the canine circulatory implantation model. Material and Method: Total of 16 fresh canine carotid arteries were harvested from eight adult dogs and divided in to GA group(n =8) and PEO-SO3 group(n=8). Sulfonation of diamino-terminated PEO was performed using propane sultone. Canine carotid arteries were only crosslinked with 0.65% GA solution in GA group and modified by direct coupling 5% PEO-SO3 solution after GA crosslinkage for 2 days and stabilized by NaBH4 solution for 16 hours in PEO-SO3 group. In both groups the resected segment of bilateral carotid arteries were reconstructed. Reconstructed segments of the two groups were analysed the quantities of calcium and phosphorous contents after 3(n=4) and 6(n=4) weeks in vivo. Result: After implantation of 3 seeks, PEO-SO3 group showed significantly less depositions.

• 한국광물학회지
• /
• 제21권4호
• /
• pp.425-434
• /
• 2008

토양과 지하수의 비소 오염은 최근 심각한 환경문제들 중 하나로 대두되고 있으며, 이러한 비소 오염은 다양한 자연적 또는 인위적 원인들로 인하여 발생할 수 있다. 지중에서 비소의 거동은 철, 망간, 알루미늄 등과 같은 여러 종류의 산화물 또는 수산화물들과 점토광물에 의하여 영향을 받고, 특히 이중에서 철 (산)수산화물이 가장 효과적으로 비소를 제어하는 것으로 알려져 있다. 이에 본 연구에서는 철 산화물의 일종인 자철석의 비소 흡착 특성을 연구하였다. 자철석이 비소의 화학종(5가와 3가 비소)에 따라서 어떠한 흡착 특성을 나타내는가 알아보기 위하여 비소 흡착에 주요하게 영향을 줄 수 있는 자철석의 물리화학적 특성들을 측정하고, 평형론적 실험과 반응속도론적 실험을 병행하여 수행하였다. 비소 흡착제로 사용하기 위하여 실험실에서 합성한 자철석의 영전하점(point of zero charge, PZC)과 비표면적은 각각 6.56과 $16.6\;g/m^2$로 다른 철 (산)수산화물들에 비해 상대적으로 낮은 간들을 나타냈다. 두 비소 화학종과 자철석의 평형실험 결과, 3가 비소가 5가 비소보다 더 많이 흡착되는 것으로 조사되어, 3가 비소가 흡착제로 사용된 자철석과 더 높은 친화력을 가지는 것으로 나타났다. 3가 비소는 pH 7에서, 5가 비소는 pH 2에서 흡착량이 가장 높았으며, 5가 비소의 경우 pH가 증가함에 따라 자철석의 표면과 전기적 반발력으로 인해 그 흡착량이 감소하는 것으로 나타났다. 이는 pH에 따른 자철석의 표면전하의 변화와 비소의 화학적 형태 등이 비소를 제어하는데 있어서 중요한 인자로 고려되어야 한다는 것을 지시한다. 시간에 따른 흡착 반응연구에서는 5가 비소가 3가 비소보다 더 빠르게 흡착됨을 알 수 있었으나, 비소의 화학적 존재형태에 관계없이 모두 4시간 이내에 평형 흡착에 도달하였다. 또한, 반응속도 실험결과를 지금까지 제안된 다양한 반응속도 모델들과 비교하였을 때, power function과 elovich 모델이 본 연구에서 사용된 자철석과 비소의 흡착을 가장 잘 모사하는 것으로 나타났다.