• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.467-470
• /
• 1998

The scientiic and technological aspects of water-soluble and water-swelling polymers to be synthesized from the domestic raw materials of Kazakhstan are described. The application area of polymeric reagents in medicine, biotechnology, agriculture, enhanced oil recovery, ecology is also considered.

• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.658-663
• /
• 1995

전자재료라 총칭하는 재료의 종류는 셀 수 없을 정도로 많다. 대표적인 전자재료로는 반도체재료를 들 수 있으며 다음으로는 전기광학 소자의 재료로 쓰이는 여러가지 광학용 단결정, 그리고 저항이나 축전지 등의 제조에 사용되는 여러가지 재료들도 이에 포함된다. 이러한 전자재료의 특성을 평가하는 방법도 여러가지 있겠으나 여기에서는 그 범위를 임의로 반도체레이저의 제조에 사용되는 화합물반도체에 국한시켜 각 공정별로 이떠한 평가방법이 사용되는지, 그리고 각각의 특성평가 방법에 대하여 간략하게 알아보기로 한다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1997.10a
• /
• pp.55-59
• /
• 1997

전기로 인한 재해의 가장 큰 비중을 차지하는 것이 전기 화재이다. 전기화재는 점점 증가하고 있는 추세이므로 이러한 전기 화재의 징후 검출이 가능하다면 늘어만가는 전기재해의 피해를 줄일 수 있게 된다. 이러한 전기화재는 전기 설비의 누전과 합선 및 과부하로 발생하며 이러한 현상으로 스파크를 수반하게 된다. 따라서 이러한 스파크 신호의 특성을 분석하여 전기설비의 이상현상 검출을 통하여 전기화재의 징후를 검출할 수 있게 되는 것이다. 본 논문에서는 FFT(Fast Fourier Transformation)와 DWT(Digital Wavelet Transformation) 을 이용하여 전기화재 요인으로서의 스파크 신호 특성을 분석 방법을 제시하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.456-460
• /
• 1997

As device sizes are scaled to submicron dimensions, planarization technology becomes increasing1y important, both during device fabrication and during formation of multilevel interconnects and wiring. Chemical Mechanical Polishing (CMP) has emerged recently as a new processing technique for achieving a high degree of planarization for submicron VLSI applications. This paper is presented the results of CMP process window characterization studies for 0.35 micron process with 6 metal layers.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2300-2302
• /
• 2005

Metal-Semiconductor-Metal type photodetector was fabricated with AlGaAs/InGaAs Quantum Well FET structures using simplified processing steps. The DC and RF responses were measured by 850nm wavelength injection laser. A DC responsivity in the quasisaturated regime was 0.45 A/W in CW measurements, and a bandwidth measured using a 850nm 40 ps pulsed laser was 16GHz. An electrical equivalent circuit model was extracted from measured S-parameter.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.52 no.3
• /
• pp.107-112
• /
• 2003

Amorphous carbon nitride thin films have been deposited on silicon (100) by reactive magnetron sputtering method. The basic depositon parameters varied were the r.f. power(up to 250 W), the deposition pressure in the reactor(up to 100 mtorr) and Ar:$N_2$ gas ratio. FT-IR and X-ray photoelectron spectra showed the presence of different carbon-nitrogen bonds in the films. The surface topography of the films was studied by scanning electron microscopy(SEM) and atomic force microscopy(AFM).

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1526-1526
• /
• 2016

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1962-1964
• /
• 1999

Effect of IDT structures on the frequency response of the SAW device are investigated. Various types of IDTs, such as MSC(multistrip-coupler), double split, reflector, and ground line. are designed and patterned on the widely used Y-Z cut LN$(LiNbO_3)$ substrate. Center frequencies, band widths, and insertion losses are measured and compared. Invalidity of the conventional model based on the impulse response model is also discussed.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.3-5
• /
• 2001

ZnO thin films are deposited on $SiO_2$/Si (111) substrate by RF magnetron sputtering. The two-step deposition method is proposed to enhance both the c-axis orientation and the resistivity of ZnO films. This method consists of the following two procedures: the 1 st-deposition for 30 min without oxygen at l00W and the 2nd-deposition with oxygen added in the range of $O_2/(Ar+O_2)=10{\sim}50%$. Effects of thermal treatment on the properties of ZnO films are systematically investigated.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.143-149
• /
• 1990

A sol-gel processing of $YBa_2Cu_3O_{7-x}$ superconductor using metal nitrate salts and sodium hydroxide as the starting materials has been investigated because of the need to produce pure, hompgeneous superconducting materials. Since the precipitation of barium hydroxides can be obtained only at high basicities, the process has to be carried out Ca. pH 13 to get the simultaneous coprecipitation with the other metal hydroxides. The involved reaction mechanisms were investigated and intermediate and final products were characterized by means of thermogravimetric analysis(TGA), infra-red(IR) spectroscopy, X-ray diffraction(XRD) analysis, scanning electron microscopy(SEM), thermal mechanical analysis(TMA) and electrical measurement.