고 흡수성 폴리머(SAP)는 콘크리트 내부에서 물을 흡수하여 팽창하며 물을 방출하면서 수축한다. 이 과정을 통해 콘크리트는 내부 양생 효과를 얻을 수 있지만 팽창한 SAP가 차지하고 있던 공간은 공극으로 존재하게 된다. 따라서 본 연구에서는 SAP를 혼입한 콘크리트의 기초 물성 및 염화물 침투 저항성을 평가하여 SAP의 내부 양생과 공극에 의한 영향을 평가하였다. 또한 SAP에 의한 내부 양생 효과를 평가하기 위해 양생 조건을 수중 양생과 봉함 양생으로 구분하여 실시하였다. 실험 결과, 수중 양생의 압축강도는 혼입율에 따라 큰 차이가 없었으며, 봉함 양생의 경우에는 SAP의 혼입율이 증가함에 따라 압축 강도가 증가하는 경향을 나타냈다. 봉함 양생의 경우 내부 양생 효과가 압축 강도 증가에 영향을 준 것으로 판단된다. 염화물 확산계수 측정 결과, SAP의 혼입율 증가에 따라 확산계수가 감소하는 경향을 나타냈으며, 특히 봉함 양생은 내부 양생 효과로 인해 수화 반응이 촉진되어 염화물 침투 저항성이 더욱 개선된 것으로 판단된다. 양생 조건이 다른 경우 표면 전기저항을 이용해 염화물 침투 저항성을 평가하는 것은 부적절한 것으로 판단된다.
This paper presents a comparison of experimental value by hemispherical grounding simulation system and calculated value by CDEGS program for ground potential rise of structure. When a test current flowed through structure grounding electrodes, ground potential rise was measured and analyzed for types of structure using the hemispherical grounding simulation system in real time, and was computed by means of CDEGS program. The model structures were designed and fabricated with two types on a scale of one-one hundred sixty. When the experimental data were compared with the theoretical values, the similar profile was shown. Therefore, the confidence of measurement was obtained. The distributions of ground surface potential are dependent on the resistivity and absorption percentage in concrete attached to structure.
This paper deals with an approach to the reduction of potential rise according to the buried depth of structure. In order to analyze the surface potential rise of structure, an electrolytic tank which simulates the semi-infinite earth has been used. The potential rise has been measured and analyzed for types of structure using an electrolytic tank experimental apparatus in real time. The structure models were designed through reducing real buildings and fabricated with four types on a scale of one-one hundred sixty. When a test current flowed through structure models, potential gradient was the highest value in case of the outline frame type(structure model A). The distributions of surface potential rise are dependent on the resistivity and absorption percentage in concrete attached to structure model.
This paper Presents the Potential gradient characteristics of structure grounding electrode when a test current flows through grounding electrode. In order to analyze the potential gradient of ground surface on structure grounding electrode, the reduced scale model has been used. The potential gradient has been measured and analyzed for types of structure using the hemispherical grounding simulation system in real time. The structures were designed through reducing real buildings and fabricated with four types on a scale of one-one hundred sixty. The supporter was made to put up with weight of structure and could move into vertical, horizontal, rotary direction. When a test current flowed through structure grounding electrodes, ground potential rise was the lowest value at electric cage type(type B). According to resistivity and absorption percentage In concrete attached to structure, the potential distribution of ground surface appeared differently.
This paper describes ground surface potential rises and touch voltage. The more soil resistivity of upper layer is lower, the more ground surface potential rise is increased. Ground surface potential rise is increased as the buried depth of ground rod in lowered. Ground surface potential rises were measured in the test site and compared with results by CDEGS program. Touch voltages according to the separation distance of ground rod were measured in four directions. Touch voltages were remarkably changed by separation distance and contact position.
본 연구에서는 충남 천안시와 강원도 원주시에 위치한 불량매립지 일대에 대해 지구물리 탐사 중 전기비저항 탐사를 실시하였으며, 수집된 자료를 이용하여 2차원과 3차원 비저항 역산 모델링을 수행하여 매립지 주변 지질구조와 침출수 오염영역, 침출수 유동을 평가하였다. 천안 직산매립지는 매립지가 논 상부에 위치하고 있으며 매립지로부터 침출수로 인한 농지 오염의 가능성이 있어 물리탐사 측선 배열을 매립지를 기준으로 서로 교차하는 측선배열을 수행하였다. 원주 매립지의 경우 매립지와 주변 논밭의 경계가 매립지 옹벽으로 나뉘며, 매립지 경계로부터 침출수 침전시설이 위치하고 있으나 현재는 방치된 상태로 침출수 누출로 인한 농지 오염의 가능성이 있다. 이에 총 4개 측선에 대해 3개 측선은 매립지 경계로부터 일정거리를 두고 평행하게 배열을 하였으며, 나머지 한 개 측선은 이 3개 측선을 교차하도록 배열하였다. 2차원 비저항 역산모델을 수행한 결과 천안매립지의 경우 침출수가 외부 논으로 확대되지 않고 매립지 내부에 정체된 형태로 존재하는 것으로 평가되었다. 이는 지하수 관측정 정기 수질분석시 측정된 지하수의 전기전도도 값의 분포에서도 확인할 수 있다. 원주 매립지의 경우는 매립지로부터 유래된 침출수가 매립지 경계 부근 폐기된 침출수 처리시설 밑으로 흐르는 것으로 평가되었고, 매립지 주변 기존 저수지였던 곳에서는 매립지 주변에 위치한 계곡의 영향으로 계곡에서 흘러드는 지하수에 의한 흐름과 과거 저수지의 영향으로 지표 근처에서 낮은 비저항대를 형성하는 것을 확인할 수 있었다. 또한 저수지 제방에서는 하부 $7{\sim}8m$ 심도에서 지하수가 논으로 유입되는 것으로 추정되었다. 이하의 반응온도 기준으로 약 $10{\sim}80%$ 이상이었다. 따라서, CVOCs 제거반응을 위하여 널리 사용되고 있는 단일 $CrO_x/Al_2O_3$ 촉매보다는 $CrO_x$의 사용량을 최소화하면서도 우수한 반응활성을 얻을 수 있는 $CrO_x/TiO_2$-based복합 산화물 촉매가 보다 바람직하며 하나의 대안적인 촉매 디자인 방법으로 응용될 수 있을 것으로 생각된다.EX>을 효과적으로 처리할 수 있었다.문에, 이 연구에서 개발된 수치모델은 퇴적물에서 일어나는 미량 오염 물질의 거동을 파악하기 위해 유용하게 사용되어질 수 있을 것으로 사료된다.
Gucunski, Nenad;Kee, Seong-Hoon;La, Hung;Basily, Basily;Maher, Ali
Structural Monitoring and Maintenance
/
제2권1호
/
pp.19-34
/
2015
One of the main causes of a limited use of nondestructive evaluation (NDE) technologies in bridge deck assessment is the speed of data collection and analysis. The paper describes development and implementation of the RABIT (Robotics Assisted Bridge Inspection Tool) for data collection using multiple NDE technologies. The system is designed to characterize three most common deterioration types in concrete bridge decks: rebar corrosion, delamination, and concrete degradation. It implements four NDE technologies: electrical resistivity (ER), impact echo (IE), ground-penetrating radar (GPR), and ultrasonic surface waves (USW) method. The technologies are used in a complementary way to enhance the interpretation. In addition, the system utilizes advanced vision to complement traditional visual inspection. Finally, the RABIT collects data at a significantly higher speed than it is done using traditional NDE equipment. The robotic system is complemented by an advanced data interpretation. The associated platform for the enhanced interpretation of condition assessment in concrete bridge decks utilizes data integration, fusion, and deterioration and defect visualization. This paper concentrates on the validation and field implementation of two NDE technologies. The first one is IE used in the delamination detection and characterization, while the second one is the USW method used in the assessment of concrete quality. The validation of performance of the two methods was conducted on a 9 m long and 3.6 m wide fabricated bridge structure with numerous artificial defects embedded in the deck.
콘크리트에 전기전도성을 부여하여 확보한 발열 성능을 통해 주택의 난방이나 터널, 도로 또는 교량 상판에 눈녹이는 것이 가능하다. 본 연구는 전기전도 발열 콘크리트 개발을 위한 선행 연구로써 탄소계 전도성 재료인 흑연을 치환한 모르타르의 역학적 특성과 함께 전기저항 및 발열 특성에 대한 실험을 실시한 후 다음과 결과를 얻었다. 토상 흑연 치환율이 증가할수록 압축강도는 감소하는 것으로 나타났으나 전기 저항은 크게 낮아지는 것으로 나타났다. 발열특성을 보이기 위해서는 흑연의 혼입이 모르타르 전체 체적의 15%이상 이루어져야 하는 것으로 나타났다. 흑연의 혼입이 일정수준이상 이루어져 낮은 전기저항 및 발열특성을 확보한 경우에는 작용하는 전압과 발열량은 높은 상관관계를 가지며 전압의 제곱과 발열온도는 비례관계에 있는 것으로 나타났다.
본 연구에서는 제강 슬래그 (fine steel slag aggregates, FSSAs) 혼입량에 따른 스마트 보수재료 (smart repair materials, SRMs)의 전기역학적 거동을 조사하였다. SRMs는 보수 품질을 스스로 진단하고 보수 부위의 손상을 자체적으로 감지할 수 있다. FSSAs는 SRMs에 모래 중량 대비 0% (FSSA00), 25% (FSSA25), 그리고 50% (FSSA50) 치환되어 혼입되었다. SRMs의 전기저항률은 일반적으로 압축 응력이 증가함에 따라 감소하였다: 재령 7시간 기준 FSSA25의 전기저항률은 압축 응력이 0에서 22.57 MPa로 증가함에 따라 78.16에서 63.68 kΩ-cm으로 감소하였다. FSSAs의 모래 중량 대비 치환율이 0%에서 25%로 증가함에 따라 재령 7시간 기준 응력 민감도 (stress sensitivity coefficient, SSC)는 매트릭스 내 부분적인 전도성 경로 수의 증가로 인해 0.471에서 0.828 %/MPa로 증가하였다. 하지만, 치환율이 50%까지 증가함에 따라 부분적인 전도성 경로들의 일부가 연속적인 전도성 경로로 변화하여 SSC는 0.828에서 0.649 %/MPa로 감소하였다. SRMs는 보수 부위의 전기저항률만을 측정하는 것으로 보수 품질을 진단하고 보수 부위의 추가 손상을 스스로 감지할 수 있을 뿐만 아니라 구조물의 역학적 성능을 빠르게 회복시킬 수 있을 것으로 기대한다.
시멘트계 재료의 응결시간 제어는 초기 콘크리트 성능 확보를 위한 중요한 평가 요소 중 하나이다. 최근 평균 기온 상승으로 특정 수화물 생성 억제 및 응결시간 제어를 위한 지연제의 사용이 권장되고 있다. 비카트 침 등 관입저항 측정 시험법의 한계를 극복하기 위해 응결시점 평가를 위한 다양한 비파괴 평가 기법이 제안되고 있지만, 지연제 사용에 따른 비파괴 평가법 사용 가능성 확보를 위해서는 여전히 실험적 연구 수행이 요구되고 있다. 본 연구에서는 타타르산 지연제를 사용하여 시멘트 페이스트의 응결 지연을 유도하고, 비카트 침 시험과 함께 전기비저항과 초음파 속도 모니터링을 수행하였다. 두 비파괴 측정 결과의 상승시점 결정을 통해 시멘트 페이스트의 응결시점을 평가하고, 비카트 침 측정을 통한 초결 및 종결 시점과의 분석으로 지연제 사용에 따른 응결 지연 현상 평가 가능성을 확인하였다. 또한 전기비저항 상승시점에 대한 X선 회절 분석을 통해 타타르산 지연제 사용에 따른 수화반응 변화를 측정하고 전기비저항 측정의 응결 지연 평가에 영향을 주는 주요 수화물을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.