• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2002년도 학술대회논문집
• /
• pp.383-388
• /
• 2002

The appropriateness or in appropriateness for the standard value and presentation problem after measuring the electromagnetic field occurring in an electrical railroad.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2000년도 학술대회논문집
• /
• pp.235-240
• /
• 2000

This paper presents the reasonable method for electric power management through efficient use of electricity. With a rapid of national economics and living standard, electrical energy consumption markedly increased. Especially it is increased electrical energy consumption in commercial buildings and thus an energy conservation through efficient use of electricity became more important.

• 조명전기설비학회논문지
• /
• 제21권10호
• /
• pp.101-107
• /
• 2007

대부분의 전기화재와 부재로 인한 미점검 문제가 발생하고 있는 일반용 전기설비의 효율적 안전관리를 위한 원격감시시스템의 도입을 위해서는 비용과 설치를 고려한 수용가 장치 모델의 개발이 필요하다. 본 논문에서는 일반용 전기설비의 원격 전기안전 감시를 위한 수용가 장치 모델들을 제시하였고 일반용 전기설비 설치 장소에 따른 합리적 모델을 찾기 위해 비용, 설치 및 통신 방법을 비교하였다. 그 결과 일반용 전기설비의 대부분을 차지하고 있는 주택 전기설비의 원격 전기안전 감시를 위한 합리적 모델은 저압원격검침 계량기에 안전감시 기능을 부여하는 것으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 전기설비
• /
• pp.65-66
• /
• 2006

The speciality of education installation has to be applied to the design construction, inspection of school in the installation. But. it was applied general electric installation standards in korea. Therefore, the electric shock accidents and fire was more frequently occurred in the school than in other building. So, this paper, is proposed the comprehensive countermeasure for safety of school electric installation

• 조명전기설비학회논문지
• /
• 제21권5호
• /
• pp.99-105
• /
• 2007

본 논문에서는 초 중 고등학교 전기시설물을 대상으로 전기안전에 대한 현장조사를 하였다. 현장조사는 수전설비, 교실, 과학실 및 음악실 등을 대상으로 연구원, 경력 15년 이상의 전기기술자 및 기타 관련 전문가에 의해 전국적으로 수행하였다. 41개 학교를 대상으로 현장조사를 실시한 결과, 수전설비의 접지방식은 공통접지방식이 지배적이었다. 위험요소로는 선풍기 조절기함의 부재, 실험대 전원의 인체보호용 누전차단기의 미설치, 비접지 콘센트의 사용 등으로 나타났다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 전기설비
• /
• pp.25-26
• /
• 2006

An electrical fault is defined as any abnormal condition caused by reduction in the insulation strength between energized conduction parts and ground or any grounded part of an electrical system. Failure of solid insulation can be caused by excessive mechanical tension being applied on the insulation, harsh service environment, aging, and also by corona phenomena. The number of empty houses during normal working hours is rising. As a result, the number of uninspected electric installation for general use is increasing. To define the potential risk of the electric installation, measurement of leakage current has been getting considered, but because the measured leakage current value also contained leakage current by capacitance, the measured value can not be adapted to absolute reference to the installation. Therefore, in this paper, the correlation between the condition of electric installation and leakage current were analyzed.

• 조명전기설비학회논문지
• /
• 제26권6호
• /
• pp.53-58
• /
• 2012

A conductor has been produced according to IEC standard and low voltage electrical facility has been installed according to IEC 60364. But because of many related and varied standards, it is difficult to apply to design and inspect for electrical equipment. We researched the necessity of design guide which is detailed and systematization from survey. For detailed design guide, we suggest application method and review items at calculations for voltage drop calculations on low voltage feeder by IEC 60364, BS 7671 standard and Consumer's Electrical Installation Guide.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.63-65
• /
• 2006

A electrical fault is defined as any abnormal condition caused by a reduction in the insulation strength. To define the potential risk of the electric installation, measurement of leakage current has been getting considered, but because the measured leakage current value also contained leakage current by capacitance, the measured value could not be adapted to absolute reference to the installation. Therefore, in this paper, the correlation between the condition of electric installation and leakage current were analyzed. The result focuses on to detect them in a cost efficient way.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.298-302
• /
• 2005

This paper presents the protection effect of SPDs according to installation conditions. To develop the effective protection countermeasures of information and communication equipments against lightning surges, actual-sized experiments in relation to the protection effects on the installation positions of surge protective devices(SPDs), the length of branch circuit the materials and long of conduit were conducted. The best method for protecting the electronic equipments from surges is to install the SPD at the front point of the devices to be protected. The installation method of the metal conduit bonded with common ground conductor were more effective than that of the PVC conduit.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1996년도 추계학술발표회논문집
• /
• pp.130-133
• /
• 1996