• Journal of Bio-Environment Control
• /
• v.12 no.2
• /
• pp.95-100
• /
• 2003

To evaluate the effect of the fertilizer concentration after flowering on growth a31d fruit setting of ornamental pepper (Capsicum annuum L.), plants were fertilized with $100\;mg{\cdot}L^{-1} of N ($EC=0.8\;dS{\cdot}m^{-1}) until flowering, and then with 0 (no fertilizer), 100, 200 or $300\;mg{\cdot}L^{-1} of N (fertilizer solution EC of 0.15, 0.8, 1.45 or $2.10\;dS{\cdot}m^{-1}, respectively) until harvest. Maximum leaf area and shoot dry mass at the end of the growing period were obtained when plants were fertilized with $200\;mg{\cdot}L^{-1} of N. Total fruit number per plant at the end of the growing period was not different when plants were fertilized with 100,200 or 300 mg{\cdot}L^{-1}of N concentration. When plants were fertilized with $200\;mg{\cdot}L^{-1} of N, the number of fruits per plant was decreased significantly as compared to 100, 200 or $300\;mg{\cdot}L^{-1} of N, whereas the percentage of red fruits at the end of the growing period was maximized. Total fruit fresh weight per plant at the end of the growing period was highest with the concentration of $200\;mg{\cdot}L^{-1} of N. The EC of the growing medium remained within 0.8 to $1.2\;dS{\cdot}m^{-1}\;2.0\;to\;3.0dS{\cdot}m^{-1}, or 3.0 to 4.5 dS{\cdot}m^{-1}when fertilizer concentrations were 100, 200 or $300\;mg{\cdot}L^{-1} of N, respectively. Throughout most of the experiment, the pH of the growing medium remained within 5.4 to 6.2, but dropped to 4.9 near the end of the experiment when fertilizer concentration was 200 or 300\;mg{\cdot}L^{-1} of N. Content of most of the nutrients In the leaf was not affected by the different fertilizer concentration. Only aluminum was significantly affected and decreased linearly with increasing fertilizer concentration. The results from this study indicated that optimal fertilizer concentration after flowering for commercial production of ornamental pepper was 100 or $200\;mg{\cdot}L^{-1} of N. At these concentrations, the EC of the growing medium remained approximately within 0.8 to 1.2 and 2 to $3\;dS{\cdot}m^{-1}, respectively. This appears to be the optimal range for vegetative growth or fruit setting of ornamental pepper plants, and indicates that ornamental pepper can be grown with a fairly wide range of fertilizer concentrations.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.372-379
• /
• 2006

This study was carried out to improve chemical properties of salt-accumulated plastic film house soil. Compressed expansion rice hull was applied at 0, 2.5, 5.0, $7.5Mg\;ha^{-1}$, and drip irrigation was initiated at -33 kilopascals (kPa) of soil water potential and ceased adjusted up to -10 kPa. Another treatment was the application of inflated rice hull at $5.0Mg\;ha^{-1}$ with drip irrigation starting at soil water potential -20 kPa and adjusted to -10 kPa. Lettuce(Lactuca sativa L.) was cultivated at sandy loam soil with $5.1dS\;m^{-1}$ of electrical conductivity (EC). $EC_w$(1:5) of plots treated with $5.0Mg\;ha^{-1}$ of inflated rice hull and irrigated at the point of -20 kPa and -33 kPa of soil water potential was reduced by 26% and 24% less than untreated control plot, respectively. Soil $EC_w$(1:5) has close relationship with $Cl^-$ as well as $NO_3{^-}-N$ and $SO{_4}^{2-}$ in the soil. Total nitrogen in leaf of lettuce was deficient in the earlier growth stage. The yield of lettuce increased by 6% by the application of inflated rice hull of $5.0Mg\;ha^{-1}$ with drip irrigation starting at -33 kPa of soil water potential. It decreased 4% when the drip irrigation was stated at -20 kPa of soil water potential. The amount of water used for irrigation was reduced with the increasing application of inflated rice hull. The watering initiated at the point of -33 kPa was more economical compared with starting at -20 kPa.

• Geomechanics and Engineering
• /
• v.23 no.2
• /
• pp.103-113
• /
• 2020

Gypsiferous soils classified as problematic soils due to the dissolution of gypsum. Presence of gypsum in the soils texture subjected to steady flow can cause serious damages for the buildings, roads and water transmission canals. Therefore, researchers have conducted a series of physical, mechanical and microstructural laboratory tests to study the effect of gypsum leaching on the geotechnical properties of a lean clay containing 0%, 3%, 6%, 9%, 12%, and 15% raw gypsum. In addition, a combination of two nano-chemical stabilizers named Terrasil and Zycobond was used in equal proportions to stabilize the gypsiferous clayey samples. The results indicated that gypsum leaching considerably changed the physical and mechanical properties of gypsiferous soils. Further, adding the combination of Terrasil and Zycobond nano-polymeric stabilizers to the gypsiferous soil led to a remarkable reduction in the settlement drop, compressibility, and electrical conductivity (EC) of the water passing through the specimens, resulting in improving the engineering properties of the soil samples. The X-ray diffraction patterns indicate that stabilization by terrasil and zycobond causes formation of new peaks such as CSH and alteration of pure soil structure by adding raw gypsum. Scanning electron microscope (SEM) images show the denser texture of the soil samples due to chemical stabilization and decrease of Si/Al ratio which indicates by Energy dispersive X-ray (EDS) interpretation, proved the enhance of shear strength in stabilized samples.

• Membrane and Water Treatment
• /
• v.9 no.6
• /
• pp.455-462
• /
• 2018

The measurement and monitoring of the biochemical oxygen demand (BOD) play an important role in the planning and operation of wastewater treatment plants. The most basic method for determining biochemical oxygen demand is direct measurement. However, this method is both expensive and takes a long time. A five-day period is required to determine the biochemical oxygen demand. This study has been carried out in a wastewater treatment plant in Turkey (Hurma WWTP) in order to estimate the biochemical oxygen demand a shorter time and with a lower cost. Estimation was performed using artificial neural network (ANN) method. There are three different methods in the training of artificial neural networks, respectively, multi-layered (ML-ANN), teaching learning based algorithm (TLBO-ANN) and artificial bee colony algorithm (ABC-ANN). The input flow (Q), wastewater temperature (t), pH, chemical oxygen demand (COD), suspended sediment (SS), total phosphorus (tP), total nitrogen (tN), and electrical conductivity of wastewater (EC) are used as the input parameters to estimate the BOD. The root mean squared error (RMSE) and the mean absolute error (MAE) values were used in evaluating performance criteria for each model. As a result of the general evaluation, the ML-ANN method provided the best estimation results both training and test series with 0.8924 and 0.8442 determination coefficient, respectively.

• Journal of Animal Environmental Science
• /
• v.3 no.1
• /
• pp.13-18
• /
• 1997

This study was conducted to investigate the physicochemical changes during the aerobic composting of swine manure mixed with bulking agent, sawdust(v/v, 1:1), in a full-scale composting plant using rectangular escalator-aginated bed composting system. Physical and chemical properties were analyzed on the samples which were collected at 5, 15, and 25 day of composting, curing and final step. The results of this study were summarized as follows; 1. Moisture and K2O content, and pH of final step were higher than those of 5th day of composting (p＜0.05). 2. Ammonium nitrogen, total organic corbon and organic matter content, and electrical conductivity(EC) were significantly decreased (p＜0.05) but nitrate nitrogen, ash and P2O5 content increased(p＜0.05) throughout the aerobic composting process. 3. Total organic carbon per total nitrogen(C/N) and total organic matter per total nitrogen(OM/N) ratio were significantly decreased throughout the aerobic composting process(p＜0.05). 4. Physical and chemical properties of swine manure were varied by aerobic fermentation using rectangular escalor-aginated bed composting system.

• Journal of Environmental Science International
• /
• v.27 no.8
• /
• pp.677-688
• /
• 2018

The purpose of this study was to minimize salt water intrusion into freshwater aquifers and limit the development of freshwater aquifers, by selecting an appropriate excavation depth of in the western coastal area of Jeju Island. The study site was mostly basaltic lava, which was mainly composed of trachy basalt. A vertical logging test was conducted to investigate the vertical distribution of the groundwater and saline groundwater interface in the study well. It was found that freshwater groundwater, saline groundwater, and freshwater groundwater are distributed from the surface to approximately 16 m, 16~50 m, and 50~60 m, below the ground, respectively. In order obtain saline groundwater and minimize the inflow of freshwater into this well, the drilling depth should be limited in the range of 16~50 m from the surface. Thus, saline groundwater well development should be carried out with reference to the measurement results, which depend on the drilling depth and EC (electrical conductivity) obtained with drilling apparatus for geology and ground handling.

• Journal of Biosystems Engineering
• /
• v.42 no.4
• /
• pp.265-275
• /
• 2017

Purpose: This study aims to identify the most stable boring shape among the circle, square, and inverted-triangle types in order to be applied to the development of a tractor-pulled underdrain boring device. Methods: The underdrain boring devices designed with the circle, inverted triangle, and square types were analyzed by numerical analysis, and they were evaluated by soil moisture and underground water level in the test field. Results: The results of the numerical analysis indicated that the increases in displacement, and strain when a uniform load is placed on the surface soil with soil weight were in the order of the inverted-triangle type, square type, and circle type. The soil moisture content and the underground water level after rainfall showed the largest difference in the order of the circle type, square type, and inverted-triangle type, indicating that the circle type had the largest drainage effects after rainfall. Conclusions: The overall findings of this study show that the circle type is the most stable among the circle, square, and inverted-triangle types.

• Korean Journal of Environmental Agriculture
• /
• v.26 no.4
• /
• pp.294-299
• /
• 2007

Natural gypsum has been used as a soil amendment in the United States. However, flue gas desulfurization (FGD)-gypsum has not traditionally been used for agricultural purpose although it has potential benefit as a soil amendment. To expand use of FGD-gypsum for agricultural purpose, the effect of FGD-gypsum on soil chemical properties was investigated in the field scales. Application rates for this study were 0 (control), 1.1, and 2.2 Mg ha-1 of FGD-gypsum. After two year application, the soil samples were taken to 110 cm depth and sub-sampled at 10 cm intervals. The heavy metal contents in FGD-gypsum were lower than ceiling levels allowed by regulations for land-applied biosolids. Soil pH was not largely affected by FGD-gypsum application. Although degree of calcium (Ca) saturation in surface horizons increases only slightly with respect to the control, there is a clear decrease in exchangeable aluminum (Al). FGD-gypsum clearly increases the soil electrical conductivity (EC) with increasing application rate. Water-soluble Ca and sulfate is increased with FGD-gypsum application and these ions moved to a depth of at least 80 cm after only 2 years. We conclude that surface application of FGD-gypsum can mitigate toxicity of Al and deficiency of Ca in subsoil of acid soil.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.1
• /
• pp.56-64
• /
• 2017

Soil quality has been regarded as an important factor for maintaining sustainability of ecosystem. Main purpose of this research was i) to select minimum factor for predicting biomass, and ii) to calculate soil quality index for biomass according to soil chemical properties. Result showed that soil pH, electrical conductivity (EC), soil organic matter (SOM), cation exchange capacity (CEC), and available phosphorus are minimum data set for calculating biomass production in soil. Selected representative soil chemical properties were evaluated for soil quality index and rated from 1 to 5 (1 is the best for biomass production). Percentage of each grade in terms of biomass production in national wide was 14.52, 35.23, 33.03, 6.47, 10.75% respectively. Although, only soil chemical properties were evaluated for calculating optimum soil quality, result of this research can be useful to understand basic protocol of soil quality assessment in national wide.

• The Korean Journal of Ecology
• /
• v.28 no.6
• /
• pp.383-387
• /
• 2005

In order to clarify the causal of free decline, which observed around the industrial complex, we analyzed pH, electrical conductivity (EC), and cation in rainfall and throughfall cations concentration in the air in tree areas, suburban and rural area. pH of both rainfall and throughfall was lower in the industrial area than the suburban and rural areas. Among the abiotic and biotic factors analyzed in this study, relations between decline degree of Pinus thunbergii and ingredients of rainfall, pH and $Ca^{2+}$ showed negative and positive correlations, respectively.