• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.776-782
• /
• 1996

The electrical properties of vapor deposition polymerized polymide thin films for getting an in-line system with manufacturing process of semiconductor device, have been studied. Polyimide thin films fabricated by vapor deposition polymerization(VDP) method based on PMDA and 4,4'-DDE monomer were confirmed by FT-IR spectra. It is found that the major conduction carriers of thin films are ions, and the hopping length of ions is almost same with monomer length at the temperature over 120.deg. C through the analysis of electrical conduction mechanism. Also, The activation energy is about 0.69 eV at the temperature of >$30^{\circ}C$ - >$150^{\circ}C$ and it is shown that the resistivity at which thin films can be used as an insulating film between layers of semiconductor device, is 3.2*10$^{15}$ .ohm.cm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.395-397
• /
• 1995

To investigate the effects of solvent extraction on electrical properties of LDPE, charge distribution, electrical conduction, and FT-IR experiments are carried out for three kinds of LDPE which are same for melt index (MI) and density. The effects of short chains for the charge distribution are quite different. For the electrical conduction, the electrical conduction mechanism remains unchanged, as the solvent extraction temperature is increased.

• 대한전기학회논문지
• /
• 제40권5호
• /
• pp.489-495
• /
• 1991

In this paper, we study the electrical conduction mechanism in Langmuir-Blodgett(LB) ultra thin films for which the LB device has a metal/LB films(TCNQ)/metal sandwich structure. Our experiments show that the current at the LB device does not depend on the temperature at below 0 C. This phenomena confirm that the electrical conduction current is a tunnel current inherent to ultra thin films. However, the current depends upon the temperature near the room temperature. This phenomena indicates the electeical conduction current is a Schottky current inherent to ultra thin films.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.281-284
• /
• 1999

In this paper, the electrical conduction, breakdown strength and dielectric properties were investigated in the interfaces of PET films. The volume resistivity and breakdown strength were decreased; especially the specimens with semiconductive layer showed the lowest breakdown strength. This decrease of electrical properties was appeared by increasing charge density in inhomogeneous layer of PET. The dielectric properties of PET did not show significant difference with PET/PET but the films with semiconductive interface layer showed the increase in capacitance and $tan\delta$ was affected by the PET rather than semiconductive layer. It is assumed that the variation of $tan\delta$ was affected by the dielectric polarization and the leakage current(charge).

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.820-825
• /
• 1998

We deposited stearic acid LB films by using Langmuir-Blodgett (LB)method and investigated anisotropy electrical conduction characteristics by I-V measurement for horizontal direction and vertical direction. Also, we measured gad response between deposited LB films and organic gas for various temperature(0~8$0^{\circ}C$) by 9MHz At-cut quartz crystal microbalance. The LB films have electrical conduction characteristics such as semiconducting and insulating properties. The is, the conductivity of LB films for the horizontal and vertical direction is about 10\ulcornerS/cm and 10\ulcorners/cm, respectively. the frequency shift of stearic acid LB films for the organic gases depended on the mass change by the surface adsorption and the inner penetration to the sensing films. The resonant frequency shift of the quartz crystal microbalance for temperature properties of LB films is thought to the effect of the rearrangement or the damage pf LB films above the melting point and the mobility increasement of the organic gas by the temperature rising.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.12-15
• /
• 1993

The correlation between electrical conduction and dielectric relaxation properties of copper ion conducting glasses is discussed. The glasses were prepared in the system $CuI-Cu_2S-Cu_2O-MoO_3$ using rapid quenching technique. These glasses have high ionic conductivities at room temperature in the range of $10^{\circ}$[S/m], and the conductivities increase with increasing CuI content. The activation energies for conduction are 0.26 - 0.57 eV. The dielectric relaxation times are 1 - 10uS, and the activation energy for ion jumping are 0.18 - 0.41eV. It is shown that the tendency of conduction properties depending on composition of the glass is similar those of dilectric relaxation.

• 한국응용과학기술학회지
• /
• 제23권3호
• /
• pp.238-242
• /
• 2006

Polyimide is a well-known organic dielectric material, which has not only high chemical and thermal stability but also good electrical insulating and mechanical properties. In this research, the electric conduction mechanism of PI Ultra-Thin Films was investigated at room temperature. At low electric field, ohmic conduction $(I{\propto}V)$ was observed and the calculated electrical conductivity was about $4.23{\times}10^{-15}{\sim}9.81{\times}10^{-15}\;S/cm$. At high electric field, nonohmic conduction $(I{\propto}V^2)$ was observed and the conduction mechanism was explained by space charge limited region effect. The dielectric constant of PI Ultra-Thin Films was about 7.0.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권10호
• /
• pp.60-65
• /
• 1998

Deposition conditions, surface morphology, and electrical properties of polyamic acid alkylamine salts (PAAS) Langmuir-Blodgett(LB) films have been investigated through a study of surface pressure-area $\pi$-A isotherms, AFM (atomic force microscopy), and current-voltage characteristics. To obtain the optimum conditions of film deposition, the $\pi$-A isotherms were examined by varying temperature, barrier moving speed, dipping speed, spreading amount of solution etc. The Z-type LB films were made at the surface pressure of 5 mN m-1 and 25 mN m-1 for the AFM study; the former surface pressure forms the gas phase and the latter one forms the solid phase. The LB film made in the gas phase show domains with a size of about 200 A diameter and 70 A height. However, the LB films made in the solid phase show a very smooth surface with 2 A surface roughness. In the current-voltage characteristics measured along the perpendicular direction of the films, ohmic conduction has been observed below 105 V cm-1 and the calculated electrical conductivity is about 10-13 S cm-1. Nonohmic conduction has been observed above = 10-11 V cm and the conduction mechanism can be explained by the Schottky effect.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권2호
• /
• pp.97-104
• /
• 1997

In this paper, in order to investigate the behavior of charged particles on (Sr.Ca)TiO$_{3}$ ceramics with paraelectric properties, the characteristics of electrical conduction and thermally stimulated current was measured respectively. As a result, the conduction mechanism is divided into three regions having different mechanism as the current increased. The region I below 200[V/Cm] shows the ohmic conduction. The region B between 200[V/cm] and 2000[V/cm] can be explained by the Poole-Frenkel emission theory, and the region III above 2000[V/cm] is dominated by the tunneling effect. The three peaks of TSC were obtained at the temperature of -20[.deg. C], 20[.deg. C] and 80[.deg. C], respectively. The origins of these peaks are that the .alpha. peak observed at -20[.deg. C] looks like to be ascribed to the ionization excitation from donor level in the grain, and the .alpha.' peak observed at 20 [.deg. C] appears to show up by hopping conduction of the trapped carrier of border between the oxidation layer and the grain, and the .betha. peak observed at 80[.deg. C] seems to be resulted from hopping conduction of existing carrier in the trap site of the border between the oxidation and second phase.

• 펄프종이기술
• /
• 제35권2호
• /
• pp.52-57
• /
• 2003

The charcoal is known to have gas adsorption capability and electrical properties. Some practical applications of carbon materials for the purpose of limited electrical conduction were made in these days. In this paper, we applied the several different kinds of charcoal to the papers in three different ways to investigate if charcoal application method affects its electrical conduction capability. Wet end addition, making multiply, and coating method were tested. The area electrical resistivity of charcoal containing paper was measured. The strength properties of charcoal containing paper were compared to those of the control, which had no charcoal in it. Experimental results showed that manufacturing conditions of the charcoal itself changed its electrical and strength properties of charcoal containing paper. The electrical properties of charcoal containing paper can be used for the removal of electrostatic problem in packaging system. The strength property of the charcoal containing paper should be kept, at least, over the minimum requirement for the packaging system. By using coating method on paper or making multiply, strength loss of paper by inclusion of charcoal could be overcome.