• 한국광학회지
• /
• 제8권5호
• /
• pp.377-381
• /
• 1997

MgO가 2 mole% 첨가된 LiNbO$_{3}$ 결정을 3 V/cm, 5 V/cm, 7 V/cm의 전기장에서 poling하여, 5 V/cm의 전기장이 최적의 조건임을 제2고조파발생의 온도의존도특성을 관찰하여 알 수 있었다. 결정에 공간적으로 변조된 전기장을 인가하여 온도 위상 정합 모양이 찌그러짐을 관찰하였으며, 이 결과와 잘 일치하는 계산값을 정량적으로 구할 수 있었다. 이것으로부터 제2고조파의 온도위상정합모양을 이용하여 결정의 균일성을 판단할 수 있음을 증명하였다. 5 V/cm로 poling된 단결정의 온도 위상 정합 모양으로부터 온도에 따른 복굴절의 변화율, c-축으로 전기장을 인가하여 변화된 위상 정합 온도로부터 전기장에 따른 복굴절의 변화율을 계산하였다.

• 대한전자공학회논문지SD
• /
• 제37권5호
• /
• pp.9-15
• /
• 2000

본 논문에서는 진공 증착법 (Physical Vapor Deposition) 과 전계인가를 통해 두께 3㎛ 의 PVDF (polyvinylidene fluoride) 박막을 제작하여 적외선 흡수분석과 유전특성 및 전기전도 현상을 조사하였다. 진공 증착법으로 제작한 PVDF 박막을 적외선 흡수 분광기 (FT-IR) 로 분석한 결과, 509.45 ［cm/sup -1/］ 와 1273.6 ［cm/sup -1/］의 특성피크가 검출되는 것으로 보아 제작된 PVDF 박막이 β형임을 확인할 수 있었다. β형 PVDF 박막의 유전특성을 측정한 결과, 비유전률은 주파수가 증가함에 따라 지속적으로 감소하는 이상분산을 나타내었고 유전손실은 온도의 증가에 따라 200㎐ 에서 7000㎐ 로 유전 흡수점이 이동함을 관찰할수 있었는데, 이는 디바이 이론과 일치하는 것이었다. 유전손실의 온도 의존성으로부터 구한 활성화 에너지(ΔH) 는 21.64㎉/mo1e 로 조사되었다. β형 PVDF 박막의 누설전류밀도에 대한 온도의존성과 전계의존성을 조사하여 PVDF 박막의 전기전도기구가 이온전도임을 확인할 수 있었다.

• 전기학회논문지P
• /
• 제65권4호
• /
• pp.273-279
• /
• 2016

In this paper, a high-performance control of the induction motor for electric car was implemented to escape dependence of the rare earth magnet. Proposed high-efficiency control algorithm is a Direct Rotor Field-Oriented Control method that is insensitive to the fluctuation of motor parameters. In the DRFOC method, we need to compensate fluctuation of stator transient inductance and magnetizing inductance caused by the magnetic saturation of induction motor in high-speed area. This paper proposes Back-EMF Observer based on stator current estimator of Luenberger style. Motor control system applied the Voltage Feedback Flux Weakening Control method for high-speed operation. The proposed algorithm was verified through tests by the power train of Extended Range Electric Vehicle consists of induction motor and differential gear.

• 한국재료학회지
• /
• 제9권1호
• /
• pp.81-85
• /
• 1999

Polarization and strain induced by unipolar electric field (P\ulcorner, S\ulcorner), those induced by bipolar electric field (P, S) and remanent polarization (P\ulcorner) were investigated in 0.9Pb(Mg\ulcornerNb\ulcorner)O$_3$-$0.1PbTiO_3$relaxor ferroelectric ceramics in the temperature range of $-50^{\circ}C$~$90^{\circ}C$. From the temperature dependence of polarization and strain, the transition from predominantly paraelectric (electrostrictive) to partially ferroelectric (piezoelectric) is visualized. Under the given temperature, the P\ulcorner/P\ulcorner is always larger than the S\ulcorner/S\ulcorner and the difference between them becomes larger ass the temperature decrease. The S\ulcorner/P\ulcorner increases as the temperature decreased below phase transition temperature. It was suggested that these experimental results might be explained with a simple rigid ion model concentrating on BO\ulcorner octahedron.

• 한국광학회지
• /
• 제4권1호
• /
• pp.84-89
• /
• 1993

Mg(4 mole%):LiNb$O_3$에서 제 2고조파발생특성을 온도와 직류전장의 함수로 측정하여, Mg:LiNb$O_3$ 결정의 공간적 균일성을 조사 하였다. 발생된 제2고조파및의 세기가 위상정합된 상태의 최대값으로부터 최초로 0이 되는 온도가 결정의 광축으로 가해준 직류전장의 변화에 선형적으로 변위함을 관찰하였다. 이로부터, 최초로 Mg가 4mole% 첨가된 Mg:LiNb$O_3$ 의 전기광계수가 Congruent LiNb$O_3$의 해당하는 값보다 1.5배가 더 큼을 알 수 있었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.323-329
• /
• 2004

The electrical and rheological properties pertaining to the electrorheological (ER) behavior of chitosan derivatives, chitosan, chitosan ammonium salt and chitosan phosphate suspensions in silicone oil were investigated. Chitosan derivative suspensions showed a typical ER response (Bingham flow behavior) upon application of an electric field. However, chitosan phosphate suspension exhibited an excellent shear yield stress compared with chitosan and chitosan ammonium salt suspensions. The difference in behavior results from the difference in the conductivity of the disperse phases due to the difference of their polarizability. The shear stress for the chitosan, chitosan ammonium salt and chitosan phosphate suspensions exhibited a linear dependence on the volume fraction of particles and 1.18 ,1.41 and 1.67 powers of the electric field. On the basis of the experimental results, the newly synthesized chitosan derivative suspensions found to be an ER fluid.

• KSTLE International Journal
• /
• 제5권2호
• /
• pp.49-51
• /
• 2004

The electrical and rheological properties pertaining to the electrorheological (ER) behavior of chitosan derivatives, chitosan, chitosan ammonium salt and chitosan phosphated suspensions in silicone oil were investigated. Chitosan derivative suspensions showed a typical ER response (Bingham flow behavior) upon application of an electric field. However, chitosan phosphate suspension exhibited an excellent shear yield stress compared with chitosan and chitosan ammonium salt suspensions. The difference in behavior results from the difference in the conductivity of the disperse phases due to the difference of their polarizability. The shear stress for the chitosan, chitosan ammonium salt and chitosan phosphate suspensions exhibited a linear dependence on the volume fraction of particles and 1.18, 1.41 and 1.67 powers of the electric field. On athe basis of the experimental results, the newly synthesized chitosan dervative suspensions found to be an ER fluid.

• Korea-Australia Rheology Journal
• /
• 제13권4호
• /
• pp.197-203
• /
• 2001

We reported on the eletrorheological (ER) properties of several semiconducting polymers including poly (p-phenylene) (PPP), poly (acene quinone) radicals (PAQRs), microencapsulated polyaniline (MPANI) and polyaniline (PANI) those we synthesized. The yield stress dependence on electric field strength for the ER fluids using these semiconducting polymers was mainly examined. The yield stress, which is an important design parameter for ER fluids, was observed to satisfy a universal scaling function, allowing that yield stress data for all the ER fluids examined in this study collapse onto a single curve for a broad range of electric field strengths. The proposed scaling function incorporates both the polarization and conductivity models.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권6호
• /
• pp.281-287
• /
• 2001

In order to obtain guidelines for design and operation of a new plasma source by a magnetic neutral loop discharge(NLD), the electron behavior was studied experimentally and numerically. Experimentally, the magnetic field gradient was changed over a wide range, and it was found that there existed an optimum value for efficient plasma production. Analyses of the electron behavior were performed using a model that included effects of a three dimensional electromagnetic field configuration considering the spatial decay of the electric field, and the limitation to the motion of electron caused by the existence of walls and thus electron loss at wall surfaces. These three dimensional factors were found to explain the existence of the optimum magnetic field gradient. It was shown that the L dependence of the plasma production efficiency was firstly decided by the finite decay length of the electric field strength, which was further modified by electron elastic collisions with neutral atoms which drove the electron to walls. The latter effect tends to reduce the optimum value of L.

• 한국환경과학회지
• /
• 제7권1호
• /
• pp.36-40
• /
• 1998

This study was carried out to investigate the collection Efficiency of mass in collector step at the different of physical gas characterization. This work has focused on the dependence of the collection efficiency of mass in the collector zone of a two-stage set up field with gas temperature T and the dew point tmeperature. To identify the dependence of the mass collection efficiency on the Bounded plate of the collector zone MP.k by the spectre electric resistance of dust $p_e$. and the relative humidify ${\varphi}$, 20 at- tempts have been made with three different gas temperature ($50{\circ}C, 80{\circ}C, 110{\circ}C$) at different dew point. At the specific electric resistance of dust $p_e$=$10^6{\Omega}m$ which relative humidity corresponds to $\phi$ > 15%, a easy rise of the sounded plate secluded dust mass share was measured atwain. As the result of the higher cohesion imprisonment power due to the adsorbtion of particle, the rinse of the relative humidity developed on the particle surface. Therefore, the collection efficiency of mass was not predominant the high temperature T in the collector zone, neither was the pecific ellectric resistance of dust dependent.