• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.228-231
• /
• 2015

In power system research fields, one of current key issues is the construction and commercialization of micro grid site which is called green island, carbon zero island, energy independent island, building micro grid, etc. and various affiliated technologies have been being vigorously developed to realize. In addition, various researches about electric vehicles (EVs) are in progress and it is expected to penetrate rapidly with the next a few years. Some new load models should be developed integrating with electric vehicle loads because the EVs' deployment could cause the change of load composition rate on power system planning and operations. EVs are also resources for micro grid as well as distributed generation and demand response so that various supply and demand side resources should be considered for micro grid researches. In this paper, the load composition rate of residential sectors is prospected considering the deployment of EVs and the resource configuration of micro grid is optimized based on net present cost. In the optimization, the load patten of case studies includes EV's charging characteristics and various cases are simulated comparing micro grid environment and normal condition. HOMER is used to compare various cases and economic effects.

• International Journal of Advanced Culture Technology
• /
• v.3 no.1
• /
• pp.90-100
• /
• 2015

Green technologies such as renewable energy resources, Electric Vehicles and Plug-in Hybrid Electric Vehicles (EVs/PHEVs), electric locomotives, etc. are continually increasing at the existing power network especially distribution levels, which are Medium Voltage (MV) and Low Voltage (LV). It can be noted that the increasing level of green technologies is driven by the reduction emission policies of carbon dioxide ($CO_2$). The green technologies can affect the quality of power, and hence its impacts of are analysed. In practical, the environment such as wind, solar irradiation, temperature etc. are uncontrollable, and therefore the output power of renewable energy in that area can be varied. Moreover, the technology of the EVs/PHEVs is still developed in order to improve the performance of supply and driving systems. This means that these developed can cause harmonic distortion as the control system is mostly used power electronics. Therefore, this paper aims to analyse the voltage variation and harmonic distortion in distribution power network in urban area in Europe due to the combination between wind turbine, hydro turbine, photovoltaic (PV) system and EVs/PHEVs. More realistic penetration levels of SSDGs and EVs/PHEVs as forecasted for 2020 is used to analyse. The dynamic load demands are also taken into account. In order to ensure the accurate of simulation results, the practical parameters of distribution system are used and the international standards such as Institute of Electrical and Electronics Engineers (IEEE) standards are also complied. The suggestion solutions are also presented. The MATLAB/Simulink software is chosen as it can support complicate modelling and analysis.

• The Journal of Economics, Marketing and Management
• /
• v.5 no.3
• /
• pp.1-11
• /
• 2017

E-infrastructural economy for ICT Living-Labs is a need for economic and cultural changes in various types of cars in accordance with the supply of the electric car. Depending on the number of cases by analyzing the supply and demand of electric vehicles among Korea and Northern Europe countries. it was indirectly proved that it makes economic growth. The research design is analyzed with the data and how to respond quickly to focus on the possibility of potential changes to the infrastructure realization and commercialization of government enterprises or electric cars through the ICT Living-Labs in Nordic countries. The data indicates that the leading commercialization emphasize on the development of the electric economic convergence and scalability for electric vehicle. When It shows the time of the infrastructure as ICT Living-Labs being delayed, it lowered growth target results for the development of the electric car industry in the future. All this is from the reason of opening the E-convergence economy over time. It is required that Korea should prepare E-convergence economy. Public regional energy should be present through the consistent selection of development for energy linking E-economy and E-trans distribution. Korea needs to be many difficulties in building the E- infrastructure for ICT Living-Labs. Unlike the Northern Europe it is to prepare the active support of both government and business. The role of the government discovers that the power generation through the quick selection of the industry, as well as to connect with the growth of the smart cities with the EVs industry.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.1
• /
• pp.37-46
• /
• 2015

In order to charge EVs, they have to be connected to distribution system. Therefore, if unprecedented numbers of EVs are connected to power systems, it could result in deterioration of power quality, overload, and other system problems. In this paper, the effects of voltage sag on the distribution system due to the connection of EVs is evaluated by considering related field data of Republic of Korea such as the number of gasoline-fueled vehicles, seasonal load of power system and the monthly and daily real-time traffic volume. The distribution system and EVs are modeled using the Electro Magnetic Transients Program (EMTP).

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.83-84
• /
• 2012

본 논문에서는 전기자동차 (Electric Vehicles, EVs) 및 플러그인 하이브리드 자동차 (Plug-in Hybrid Electric Vehicles, PHEVs)용 통합형 배터리 충전기의 토폴로지 구성에 따른 동작 및 성능 특성을 비교한다. 기존에 제안된 통합형 배터리 충전기를 토대로 개별 모듈에 적용 가능한 토폴로지를 검토한다. 또한, 검토한 모듈의 통합을 위한 양방향 구현 시 동작 및 성능을 비교한다. 이를 통해 선정된 토폴로지들이 가질 수 있는 조합들을 구성하고, 상호간의 영향을 분석한다. 분석한 결과를 기반으로 각각의 조합의 성능 및 특성의 시뮬레이션을 통한 비교추이를 제시한다.

• Journal of Power Electronics
• /
• v.15 no.2
• /
• pp.469-478
• /
• 2015

In order to promote the application of switched reluctance machines (SRM) in electric vehicles (EVs), the braking torque closed-loop control of a SRM is proposed. A hysteresis current regulator with the soft chopping mode is employed to reduce the switching frequency and switching loss. A torque estimator is designed to estimate the braking torque online and to achieve braking torque feedback. A feed-forward plus saturation compensation torque regulator is designed to decrease the dynamic response time and to improve the steady-state accuracy of the braking torque. The turn-on and turn-off angles are optimized by a genetic algorithm (GA) to reduce the braking torque ripple and to improve the braking energy feedback efficiency. Finally, a simulation model and an experimental platform are built. The simulation and experimental results demonstrate the correctness of the proposed control strategy.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.2
• /
• pp.192-198
• /
• 2013

The rapidly growing demand for electric power systems in electric vehicles (EVs) and hybrid electric vehicles (HEVs) require simpler, cost-effective, and higher performance components. In this paper, a novel power conversion system for hybrid electric vehicles is proposed for these needs. The proposed power conversion system reduces the conversion system cost while preserving same functionality. The proposed power conversion system can boost multi-sources to drive a traction motor and to store energy at the same time reducing number of switching components. In this paper, all operational modes of the proposed converter are explained in detail and verified by a computer simulation first. Then, the topology and operational modes are experimentally verified. Based on the results, the feasibility of the proposed multi-mode single leg power conversion system for EV and HEV applications is discussed.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.1
• /
• pp.1-10
• /
• 2017

With the current global need for eco-friendly energies, the large scale use of Electric Vehicles (EVs) is predicted. However, the need to frequently charge EVs to an electrical power system involves risks such as rapid increase of demand power. Therefore, in this paper, we propose a practical smart EV charging scheme considering a Time-of-Use (ToU) price to prevent the rapid increase of demand power and provide load leveling function. For a more practical analysis, we conduct simulations based on the actual distribution system and driving patterns in the Republic of Korea. Results show that the proposed method provides a proper load leveling function while preventing a rapid increase of demand power of the system.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.5
• /
• pp.1789-1797
• /
• 2017

It is necessary to charge electric vehicles in order to drive them. Thus, it is essential to have electric vehicle charging facilities in place. In the case of a household battery charger, the power similar to that consumed by a household with a basic contract power of 3kW is consumed. In addition, many consumers who own an electric vehicle will charge their vehicles at the same time. The simultaneous charging of electric vehicles will cause the load to increase, which then will lead to the imbalance of supply and demand in the distribution system. Thus, a smart charging scheme for electric vehicles is an essential element. In this paper, simulated conditions were set up using real data relating to Korea in order to design a smart charging technique suitable for the actual situation. The simulated conditions were used to present a smart charging technique for electric vehicles that disperses electric vehicles being charged simultaneously. The EVs and Smart Charging Technique are modeled using the Electro Magnetic Transients Program (EMTP).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.2
• /
• pp.199-204
• /
• 2013

Recently, the demand for fuel efficient electric vehicles (EVs) and hybrid electric vehicles (HEVs) has been growing globally. Due to the increased number of switching devices in the electrified vehicles, the probability of the semiconductor device failure is much higher than in other application areas. A sudden failure in one of the power switches and insufficient power management ability in the systems not only decreases system performance, but also leads to critical safety problems. In this paper, novel switch open circuit fault detection method is proposed, and the proposed approach is verified by experiments.