• Journal of Energy Engineering
• /
• v.20 no.1
• /
• pp.1-7
• /
• 2011

The performance and life-cycle costs of electric vehicle(EV) and hybrid electric vehicle(HEV) depend inherently on battery packs. Temperature uniformity in a pack is an important factor for obtaining optimum performance for an EV or HEV battery pack, because uneven temperature distribution in a pack leads to electrically unbalanced battery cells and reduced pack performance. In this work, a three-dimensional modeling was carried out to investigate the effects of operating conditions on the thermal behavior of a lithium-ion battery pack for an EV or HEV application. Thermal conductivities of various compartments of the battery were estimated based on the equivalent network of parallel/series thermal resistances of battery components. Heat generation rate in a cell was calculated using the modeling results of the potential and current density distributions of a battery cell.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.5
• /
• pp.736-744
• /
• 2012

In this paper, a battery charging system for Plug-in Hybrid Electric Vehicle (PHEV) and Electric Vehicle (EV), and operation algorithm of charging system are introduced. Also, the proposed charging system uses commercial electricity in order to charge the battery of parked PHEV and 48V battery charging system with power factor controllable single phase converter for PHEV is investigated in this paper. This research verifies the power factor control of input and the converter output controlled by the charge control algorithm through simulation and experiment.

• Journal of Platform Technology
• /
• v.11 no.2
• /
• pp.54-65
• /
• 2023

Due to the nature of electric vehicles, the batteries used for electric vehicles have a very large rated capacity. If an electric vehicle runs for a long time or an electric vehicle is abandoned due to a traffic accident, the electric vehicle battery becomes a waste battery. Even in vehicles that are being abandoned, the remaining capacity of waste batteries for electric vehicles is sufficient for other purposes. Waste batteries for automobiles are very expensive, so they need to be recycled and reused, but there was a problem that the standards for measuring the performance grade of waste batteries for recycling and reuse were insufficient. As a method for measuring the remaining capacity of waste battery, the most stable and reliable method is to measure the remaining capacity of battery using full charge and discharge. However, the inspection method by the full charging and discharging method varies depending on the capacity of the battery, but it takes more than a day to inspect, and many people are making great efforts to solve this problem. In this paper, an electric vehicle battery residual capacity analysis technique using voltage deviation between cells was studied and analyzed as a method to reduce inspection time for electric vehicle batteries. To this end, a full charging and discharging-based capacity measurement system was constructed, experimental data were collected using a nose or waste battery, and the correlation between the voltage deviation and the remaining capacity of the battery pack was analyzed to verify whether it can be used for battery inspection.

• Journal of Distribution Science
• /
• v.14 no.9
• /
• pp.5-13
• /
• 2016

Purpose - This study proposes a framework for service innovation strategy to cope with the emergence of electric vehicles. Research design, data, and methodology - This study designs an electric-vehicle lease program and collects the resulting data to analyze. By analyzing the previous studies on the electric-vehicle market with cases, a theoretical framework based on existing theories is to be set. Results - This study proposes a strategy for the rapid diffusion of electric vehicles. First, a partitioned-pricing system is proposed to create an advantage for electric vehicles in terms of initial purchasing cost relative to traditional internal combustion vehicles. Second, focusing on reducing switching costs is important because electric vehicles have relatively low resale values due to the uncertainty of battery life. Third, a battery-leasing strategy is supposed to reduce the cost of switching from a traditional internal combustion vehicle to an electric vehicle. Conclusions - This paper can provide strategic guidance for decision makers in firms that have already entered the electric-vehicle leasing market by making a recommendation such as a service innovation strategy. The proposed strategy can be considered as an electric vehicle market in the future and can contribute to the wider diffusion of electric vehicles.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.64-65
• /
• 2017

This paper review the core technical trends of TESAL EV(Electric Vehicle) Motors. The object of this study analyzes electric vehicle's body appearance, motor cooling system, battery arrangement, battery management system (BMS), and super charging station etc.

• International Journal of Automotive Technology
• /
• v.2 no.4
• /
• pp.157-164
• /
• 2001

The vehicle electric power system, which consists of two major components: a generator and a battery, which have to provide numerous electrical and electronic systems with enough electrical energy. A detailed understanding of the characteristics of the electric power system, electrical load demands, and the driving environment such as road, season, and vehicle weight is required when the capacities of the generator and the battery are to be determined for a vehicle. An easy-to-use and inexpensive simulation program may be needed to avoid the over/under design problem of the electric power system. A vehicle electric power simulator is developed in this study. The simulator can be utilized to determine the optimal capacities of generators and batteries. To improve the expandability and easy usage of the simulation program, the program is organized in modular structures, and is run on a PC. Empirical electrical models of various generators and batteries, and the structure of the simulation program are presented. For executing the vehicle electric power simulator, data of engine speed profile and electric loads of a vehicle are required, and these data are obtained from real driving conditions. In order to improve the accuracy of the simulator, numerous driving data of a vehicle are logged and analyzed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.279-287
• /
• 2012

Recharging battery in electric vehicle takes a quite long time compared with gasoline and diesel vehicle which is a problem, the industries should solve, to introduce the electric vehicle into the market. For this reason, the institutions are suggesting a method replacing the discharged battery to recharged battery which is recharged in the switching center. However, this technology is still required to make clear the controversial issues such as threats to security and identification of users. In this paper, we explore the factors that threats to securities in battery exchange system and define the security requirements of the battery exchange system to solve suggested issues. The results of the research are expected to be the reference in the other studies of electric vehicle field of the commercialization of the battery recharging methods and analysis of the securities.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.1
• /
• pp.40-45
• /
• 2014

This study examines the system and process of battery stored energy in vehicles and suggest the effective area for the use of V2G(vehicle-to-grid) from Jeju Smart Grid Demonstration Project. V2G means technology of electric power transmission from the battery of electric-drive vehicles to state grid. As for the increasing of effectiveness for demand-side control, V2G is a very good alternative. In the U.S., the utilization of electric vehicles is under 40% on average. In this case, we can use he battery of electric vehicle as role of frequency regulation or generator of demand-side resource. V2G, which is the element of Smart Transportation, consists of electric vehicle battery, BMS(battery management system), OBC(on-board charger), charging infrastructure, NOC(network operating center) and TOC(total operation center). V2G application has been tested for frequency regulation to secure the economical efficiency in the United States. In this case, the battery cycle life is not verified its disadvantage. On the other hand, Demand Response is required by low c-rate of battery in electric vehicle and It can be small impact on the battery cycle life. This paper concludes business area of demand response is more useful than frequency regulation in V2G application of electric vehicles in Korea. This provides the opportunity to create a new business for power grid administrator with VPP(virtual power plant).

• Journal of Energy Engineering
• /
• v.21 no.1
• /
• pp.86-108
• /
• 2012

$CO_2$ reduction, energy security, and emission reduction are the critical issues in the current automotive industry. As one of the solutions to these issues, Battery Electric Vehicle is attracting attention recently. Advanced battery electric drive vehicle require batteries, power electronics and electrical machines to function. These devices allow the vehicle to use energy from the battery to assist in the propulsion of the vehicle. In this paper, the main feature of these technologies are briefly introduced and recent trends of patent applications are described.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.140-144
• /
• 2019

This paper proposes an approach for measuring voltage of high voltage(HV) battery of plug-in hybrid electric vehicle(PHEV) and battery electric vehicle(BEV). The proposed methods use isolation resistor and isolation amplifier in order to measure high voltage which should be electrically separated from measuring circuit. In terms of practical applications their advantages and disadvantage are discussed and key design points are addressed by simulations. More importantly, the proposed methods are applicable to various applications such as on-board charger, inverter and battery management system (BMS) which are directly connected to HV battery in PHEV and BEV.