• 한국방재안전학회논문집
• /
• 제7권1호
• /
• pp.27-33
• /
• 2014

본 연구는 환경재난의 주요 원인인 도시 폐기물을 신속하게 신재생에너지로 재활용하여 환경오염과 악취 등의 피해 규모를 최소화하면서, 도시는 환경재난 발생비용을 최소화하고, 신재생에너지를 대정전에 대비한 에너지원으로 확보하고, 지속적인 전기에너지와 열에너지 수익원을 확보하면서, 기존에 매장된 도시 폐기물을 발굴하여 재활용하여 환경오염지역을 청정지역으로 재생산하여 깨끗한 환경을 시민에게 돌려주고, 발생되는 수익원으로부터 방재안전관리형 플라즈마 가스화 발전소 건설비용을 해결할 수 있고, 지방자치단체에 새로운 일자리를 창출할 수 있고, 신재생에너지원을 확보함으로 인하여, 지역의 혁신경제성장단지를 유치할 수 있는 인프라를 구축하는데 기여하는 등의 전략적 방재안전관리 접근방법을 제시하였다. 특히, 기후변화에 의한 대규모 자연재해인 태풍과 지진 등이 발생할 경우, 도시 폐기물이 다량으로 발생하게 되므로, 이를 신재생에너지화 하여 지역경제의 예방복구에 기여할 수 있는 원동력이 될 수 있도록 기후변화에 강건한 조건을 갖춘 모델을 제시하여, 미래도시의 전략적 방재안전관리 방안을 제시하였다.

• 한국재료학회지
• /
• 제19권1호
• /
• pp.28-32
• /
• 2009

Silicon carbide (SiC) is a promising material for power device applications due to its wide band gap (3.26 eV for 4H-SiC), high critical electric field and excellent thermal conductivity. The Schottky barrier diode is the representative high-power device that is currently available commercially. A field plate edge-terminated 4H-SiC was fabricated using a lift-off process for opening the Schottky contacts. In this case, Ni/Ti dual-metal contacts were unintentionally formed at the edge of the Schottky contacts and resulted in the degradation of the electrical properties of the diodes. The breakdown voltage and Schottky barrier height (SBH, ${\Phi}_B$) was 107 V and 0.67 eV, respectively. To form homogeneous single-metal Ni/4H-SiC Schottky contacts, a deposition and etching method was employed, and the electrical properties of the diodes were improved. The modified SBDs showed enhanced electrical properties, as witnessed by a breakdown voltage of 635 V, a Schottky barrier height of ${\Phi}_B$=1.48 eV, an ideality factor of n=1.04 (close to one), a forward voltage drop of $V_F$=1.6 V, a specific on resistance of $R_{on}=2.1m{\Omega}-cm^2$ and a power loss of $P_L=79.6Wcm^{-2}$.

• 한국인터넷방송통신학회논문지
• /
• 제21권6호
• /
• pp.25-32
• /
• 2021

본 논문에서는 비교적 구현이 쉽고, 최종 결합 포트의 전송 선로 길이를 짧게 구현할 수 있는 모드 변환기에 대해 제안하고, 8-way 공간 결합기에 적용하여 제작 및 시험을 하였다. 제안하는 모드 변환기는 그라운드와 연결되어 있는 Doorknob 형태의 원형 디스크에서 변환된 신호를 원형 도파관 내에서 개방을 시켜 TM₀₁ 모드로 변환이 이루어진다. 8-way 도파관 공간 결합기는 H-평면에서 입력된 8개의 신호를 중심의 원형 도파관에서 결합이 이루어지고, 최종 결합 모드는 TM₀₁이 되도록 설계를 하였다. 시험 결과는 삽입손실 0.4dB 이하, 결합효율 95%이상의 우수한 성능을 확인하였다. 또한 전계 분석을 통해 새로운 모드 변환 구조의 절연 파괴 전압 및 방전 임계전력을 계산하여 고출력에 적합함을 확인하였다. 본 연구를 통해 확인된 결과는 향후 고출력 고효율 SSPA에 다방면으로 적용이 가능할 것으로 기대된다.

• 한국재료학회지
• /
• 제19권9호
• /
• pp.462-467
• /
• 2009

The Charge Trap Flash (CTF) memory device is a replacement candidate for the NAND Flash device. In this study, Pt/$Al_2O_3/La_2O_3/SiO_2$/Si multilayer structures with lanthanum oxide charge trap layers were fabricated for nonvolatile memory device applications. Aluminum oxide films were used as blocking oxides for low power consumption in program/erase operations and reduced charge transports through blocking oxide layers. The thicknesses of $SiO_2$ were from 30 $\AA$ to 50 $\AA$. From the C-V measurement, the largest memory window of 1.3V was obtained in the 40 $\AA$ tunnel oxide specimen, and the 50 $\AA$ tunnel oxide specimen showed the smallest memory window. In the cycling test for reliability, the 30 $\AA$ tunnel oxide sample showed an abrupt memory window reduction due to a high electric field of 9$\sim$10MV/cm through the tunnel oxide while the other samples showed less than a 10% loss of memory window for $10^4$ cycles of program/erase operation. The I-V measurement data of the capacitor structures indicated leakage current values in the order of $10^{-4}A/cm^2$ at 1V. These values are small enough to be used in nonvolatile memory devices, and the sample with tunnel oxide formed at $850^{\circ}C$ showed superior memory characteristics compared to the sample with $750^{\circ}C$ tunnel oxide due to higher concentration of trap sites at the interface region originating from the rough interface.

• 비파괴검사학회지
• /
• 제14권1호
• /
• pp.16-22
• /
• 1994

일반적으로 구름 베어링 시스템에 비해 발전용 터어빈이나 내연기관 엔진과 같은 저어널 베어링을 가진 시스템은 상대적으로 대형 설비이거나 더 가혹한 운전조건에서 가동되는 경우가 많다. 이런 회전기계류에서의 베어링의 파손은 설비의 운전 중단 및 관련 설비의 파손까지도 초래할 수 있게 된다. 따라서 이로 인한 보수에 소비되는 시간 및 경제적인 손실등을 피하기 위해서는 저어널 베어링의 조기파손 감지의,역할은 매우 중요하게 된다. 본 연구에서는 음향방출 기술을 이용하여 베어링에서 발생할 수 있는 파손의 조기검출을 위해 실험실용으로 직접 제작한 저어널 베어링 시스템을 이용하여 여러 형태의 비정상 조건을 만들어 가며 실험을 행하였다. 베어링 손상 및 피로의 주 요인으로서는 윤활유 부족, 윤활층에의 이물질의 혼입, 조립 불량 등이 대표적인 원인으로서 알려져 있으며 이에 근거하여 실험 조건을 윤활유에의 이물질 혼입, 윤활유 부족, 그리고 축과 베어링간의 금속간 접촉등의 인위적인 형태로 구성하여 실험하였다. 그 결과로서 음향방출 기술이 저어널 베어링의 조기파손 감지에 매우 효과적인 도구라는 것을 입증하였다.

• 한국도로학회논문집
• /
• 제18권3호
• /
• pp.59-65
• /
• 2016

PURPOSES : This paper aims to develop a road pavement de-icing system using carbon sheet to replace the older snow de-icing method. Carbon sheet is a light and high-strength metal. Hence, various bodies of research for its applications in many industries have progressed. METHODS : The experiment was conducted in a laboratory. The carbon sheet supplied voltage through a power supply system, and produced heat transfers to the concrete surface. Various factors, such as pavement material, carbon sheet width, penetration depth, and freezing-thawing resistance, were considered in the conducted experiments to confirm the heating transfer efficiency of the carbon sheet. RESULTS : The carbon sheet used was a conductor. Therefore, it produced heat if voltage was supplied. The exposed carbon sheet on the atmosphere did not affect the carbon sheet width when it provided constant voltage. However, the sheet showed different heating behaviors by width change when the carbon sheet penetrated into the concrete. Moreover, the freezing-thawing resistance was decreased by the carbon sheet with increasing width. CONCLUSIONS : The experiments confirmed the possibility of developing a road snow melting system using a carbon sheet. The antiicing system using the carbon sheet to replace the traditional anti-icing system has disadvantages of environmental pollution risk and electric leakage. The pavement also improved its toughness resistance. The utilization value will be very high in the future if carbon sheet heat loss can be minimized and durability is improved.

• 전기학회논문지
• /
• 제66권5호
• /
• pp.800-805
• /
• 2017

The accelerated thermal ageing of CSPE (chlorosulfonated polyethylene) was carried out for 16.82, 50.45, and 84.09 days at $110^{\circ}C$, equivalent to 20, 60, and 100 years of ageing at $50^{\circ}C$ in nuclear power plants, respectively. As the accelerated thermally aged years increase, the insulation resistance and resistivity of the CSPE decrease, and the capacitance, relative permittivity and dissipation factor of those increase at the measured frequency, respectively. As the accelerated thermally aged years and the measured frequency increase, the phase degree of response voltage vs excitation voltage of the CSPE increase but the phase degree of response current vs excitation voltage decrease, respectively. As the accelerated thermally aged years increase, the apparent density, glass transition temperature and the melting temperature of the CSPE increase but the percent elongation and % crystallinity decrease, respectively. The differential temperatures of those are $0.013-0.037^{\circ}C$ and, $0.034-0.061^{\circ}C$ after the AC and DC voltages are applied to CSPE-0y and CSPE-20y, respectively; the differential temperatures of those are $0.011-0.038^{\circ}C$ and $0.002-0.028^{\circ}C$ after the AC and DC voltages are applied to CSPE-60y and CSPE-100y, respectively. The variations in temperature for the AC voltage are higher than those for the DC voltage when an AC voltage is applied to CSPE. It is found that the dielectric loss owing to the dissipation factor($tan{\delta}$) is related to the electric dipole conduction current. It is ascertained that the ionic (electron or hole) leakage current is increased by the partial separation of the branch chain of CSPE polymer as a result of thermal stress due to accelerated thermal ageing.

• 조명전기설비학회논문지
• /
• 제21권7호
• /
• pp.84-93
• /
• 2007

주상변압기는 고객에게 직접 전력을 공급하는 설비로서 전력공급의 안정성확보를 위한 중요한 기자재 중 하나이다. 하지만 제조결함에 의한 3년 이내의 초기고장 또는 13년이 초과 사용한 후의 열화고장이 빈번히 발생하고 있어 변압기 품질분석을 통한 신뢰성이 개선된 주상변압기 개발이 필요하다. 본 논문에서는 열적, 기계적, 전기적으로 성능이 향상된 새로운 모델의 혼합절연 주상변압기를 개발하였다. 변압기의 기계적, 열적특성을 향상시키기 위한 혼합절연 방식에 대한 설계 및 제작방법을 제시하고 과부하시험을 시행하여 순간최대부하에 대응할 수 있도록 과부하내량 160[%] 까지 증가시킬 수 있음을 확인하였다. 또한 본 논문에서는 100[kVA] 1대를 시제품으로 제작하여 단락강도시험과 변압기 관련 절연시험을 시행하여 전자기계력의 분석과 단락강도설계 향상 방안에 대하여 설명하고 이와 관련하여 연구한 결과에 대해 논하였다.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.554-560
• /
• 2017

Reduction reactivity of new oxygen carriers for chemical looping combustion system were investigated using $CH_4$ as a reduction gas in a bubbling fluidized bed reactor and compared with that of former SDN70 oxygen carrier. New oxygen carriers showed good reduction reactivity at different $CH_4$ concentration. N018-R2 particle represented better reactivity than SDN70 at high $CH_4$ concentration. N018-R2 particle showed higher fuel conversion and $CO_2$ selectivity than those of SDN70 particle within the temperature range of $750-900^{\circ}C$. Moreover, attrition loss of N018-R2 particle was almost same with that of SDN70 particle. Consequently, we could select N018-R2 particle as the best oxygen carrier.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.799-801
• /
• 1988

This paper was studied on the effects of Ca-La-Nb substitution and Zr/Ti ratio variation to Pb(Zr, Ti)$O_3$ system on structural, electrical, optical and sound level characteristics in order to develope the piezoelectric and electrooptic ceramic devices. Also the specimens were prepared by the two stage sintering technique. The molecular formular was X($CaO{\cdot}1/4La_{2}O_{3}{\cdot}1/4Nb_{2}O_{5}){\cdot}(1-X)Pb(Zr_{Y}Ti_{1-Y})O_{3}$(x=100X, y=100Y), and the variation of x was $6{\sim}12$, y was 60${\sim}$49 and second stage sintering time was 20${\sim}$40 hours. The experimental results obtained from this study are as follows : 1. The density was decreased, the grain size was increased according to increase of Ca-La-Nb substitution. 2. The crystal structure was rhombohedral in composition 6/60/40, and the crystal structure was tetragonal and cubic according to increase of Ca-La-Nb substitution. 3. The Ca substitution of PZT system enhanced the sintering property. The Pb site vacancy resulting from the substitution of La-Nb increased the dielectrical constant, the piezoelectric charge constant, the dielectric loss and decreased the coercive field. 4. The resistivity of PZT system which has the P type conduction mechanism increased according to substitution of La-Nb because of the substituent acting as donor. 5. The PZT ceramics varied from ferroelectric substance according to increase of Ca-La-Nb substituent. The coercive field and saturation remanent polarization decreased, and at last straight line according to increase of La-Nb substitution. 6. The amount of Ca-La-Nb substitution to improve the light transmittance of speciment was 10 mol%, the Zr/Ti ratio was 49/51, and the second stage sintering time was 40 hours. 7. According to Ca-La-Nb substitution, the specimens was to be transparent. The 7.5/51/49 specimen was suitable for transparent sound vibrator because it had 58% light transmittance (thick 0.2[mm], wave length 700[mm]) and 48% electromechanical coupling factor.