• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.1032-1036
• /
• 1999

The electron emission and degradation of the ferroelectric Pb($\textrm{Zr}_{0.5}\textrm{Ti}_{0.5}$)$\textrm{O}_3$ ceramics by the pulse electric field have been investigated as a function of the upper electrode diameter. Polarization increased with the decrease of the upper electrode diameter due to the increase of the volume fraction participated in the polarization reversal near the electrode edge. Simulation using ANSYS 5.3 for the electric field distribution showed that the electric field increased near the upper electrode edge of the asymmetric electrode structure. The ferroelectric volume near the upper electrode edge which contributed to the increase of the polarization and the emission charge per electrode diameter were independent on the upper electrode diameter. Polarization and dielectric constant were decreased due to the erosion of the upper electrode with repeating the emission cycles, but they were recovered by the electrode regeneration. The degradation of the ferroelectric surface resulted in the increase of the coercive field and dielectric loss.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1206-1212
• /
• 2018

In this study, the polarization reversal characteristics of thin film capacitors with a thickness of 100 nm or less fabricated with ferroelectric polymer were measured and analyzed. For the fixed film thickness, polarization reversal occurred at higher coercive fields as the applied maximum electric field increased. For the fixed maximum electric field, polarization reversal occurred at the same coercive field irrespective of the thickness of the thin film. The proportional constant values between the logarithmic electric field and the logarithmic scale frequency were $0.12{\pm}0.01$ for all measurements. As a result, the ferroelectric polymer capacitors consistently exhibited polarization reversal characteristics without any size effects up to a thickness of 40 nm. This study shows the possibility of a polymer memory device that can operate at low voltage, which is useful for predicting the behavior of a low-voltage operating polymer memory device.

• Journal of the Korean Magnetic Resonance Society
• /
• v.20 no.4
• /
• pp.114-120
• /
• 2016

Nitrogen vacancy-centered diamond has recently emerged as a promising material for various applications due to its special optical and magnetic properties. In particular, its applications as a fluorescent biomarker with small toxicity, magnetic field and electric field sensors have been a topic of great interest. Recent review (R. Schirhagl et al 2014) introduced those applications using single NV-center in nanodiamond. In this minireview, I introduce the rapidly emerging DNP (Dynamic Nuclear Polarization) field using optically-pumped NV center in diamonds. Additionally, the possibility of exploiting the optically-pumped NV center for polarization transfer source, which will produce a profound impact on room temperature DNP, will be discussed.

• Korean Journal of Materials Research
• /
• v.12 no.8
• /
• pp.613-616
• /
• 2002

The polarization properties of $BaTiO_3$ were investigated by using thermally stimulated depolarization current (TSDC) technique. Two peaks were observed at about 400 K (peak A) and 435 K (peak B) from TSDC spectra obtained from the temperature range of 280-500 K. Peak A shows a sharp decrease of TSDC due to extinction of spontaneous polarization above the phase transition temperature of $BaTiO_3$. The values of activation energy of peak A and peak B were calculated to be 0.70 eV and 0.87 eV respectively. From the results of TSDC measurement with a variation of polarizing electric field strength, we found that saturation of total current of TSDC was started from 3kV/cm. However, the amount of total current of TSDC was not affected by the variation of polarizing time.

• Current Optics and Photonics
• /
• v.2 no.1
• /
• pp.47-52
• /
• 2018

We systematically investigated the negative-refraction effect for both TE and TM polarizations in annular photonic crystals. Since two polarization waves are excited in different bands, they result in different refractive angles, and so polarization beam splitters can be made of annular photonic crystals. It was found that, in comparison to normal square-lattice air-hole photonic crystals, annular photonic crystals have a much wider common frequency band between TE-1 and TM-2, which is quite beneficial to finding the overlap between the negative-refraction regions belonging to TE-1 and TM-2 respectively. Further analyses of equifrequency surfaces and the electric-field distribution of annular photonic crystals with different parameters have not only demonstrated how the filling factor of annular cells affects the formation of the common negative-refraction region between TE-1 and TM-2, but also revealed some ways to improve the performance of a polarization beam splitter based on the negative-refraction effect in an annular photonic crystal.

• The Korean Journal of Ceramics
• /
• v.1 no.4
• /
• pp.197-203
• /
• 1995

Nearly fully dense PZT samples both with tetragonal and with morphotropic phase boundary compositions were prepared by the conventional powder processing and sintering. A micro-indentation technique was used to evaluate the dependence of fracture toughness on remanent polarization, crack length and the direction of crack propagation. The result shows that the toughness increases with the remanent polarization along the poling direction and decreases in the transverse direction. The dependence of toughness on the remanent polarization is neither symmetric nor linear but rather shown to be saturated quickly with the increase in remanent polariztion. R-curve behaviors are observed in both poled and unpoled samples. Sequential SEM and XRD studies on annealed, poled, ground, fractured and etched samples show that domain switching is evident as a viable toughening mechanism but might depend upon the rate of crack propagation. Grain bridging is also observed as one of the active toughening mechanisms.

• Journal of the Korean Ceramic Society
• /
• v.37 no.1
• /
• pp.12-20
• /
• 2000

Dielectric property of Ba-modified 0.65Pb(Mg1/3Nb2/3)O3-0.35PbTiO3 ceramics having compositions near the morphotropic phase boundary was investigated. For the specimens having Ba contents between 0 and 20 at%, the average transition temperature was decreased linearly with increasing Ba contents and the degree of hysteresis was also decreased with increasing Ba contents. The maximum dielectric constants (K), electric field induced polarization(P) and electrically-induced strain(S) were found to exihibit a maximum value at∼3 at% of Ba. The increase of S and the decrease of hysteresis by minor additions of Ba impurities indicated the development of new higher perfomance actuator materials. The composition of Ba-PMN-PT (10/65/35) may be appropriate for capacitor materials because of low hysteresis and high polarization.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.3-4
• /
• 2007

Orientational ordering of polar molecules and excess charges at the interface are main origins of surface polarization. For organic electronics, probing and control of these two surface polarization phenomena are key issues. In this presentation, I report a novel electrical measurement that can directly probe orientational dipolar motion in surface monolayers by Maxwell-displacement-current, and also report a novel optical technique that allows carrier motions in organic materials by measuring the optical second harmonic signals activated by the electric field. Then I discuss how the control of dipolar motions and carrier motions are linked to organic electronics applications such as organic field effect transistors.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.3
• /
• pp.217-225
• /
• 2003

In this paper, in order to investigate the near field distribution characteristic of the Loop Antenna we simulated and measured the near field of a Loop Antenna using optical electric-field sensor in a large Chamber(8.5 m x 7 m x 7 m). The simulation methods were used MoM for frequency domain and FDTD for time domain. From the analysis results, it can be seen that the simulation and measurement results are very aggregated, and the optical electric-field sensor is a certificate of validity. In frequency domain, in case of the optical sensor with vertical polarization is located above the near vertical line of the Loop Antenna the signal strength level is more 15 ㏈ than with horizontal polarization. But in case of the optical sensor located above horizontal line of the Loop Antenna, signal strength level is not different. And, in the time domain, although input signal is positive, in the case of the optical sensor with vertical polarization is located above horizontal line of the Loop Antenna, it can be seen that the received pulse shape is negative.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.3
• /
• pp.248-252
• /
• 2005

The effects of electric field strength and mechanical compressive stress on the displacement of multilayered ceramic actuator, stacked alternatively 0.2 (PbM $n_{1}$3/N $b_{2}$3/ $O_3$)-0.8(PbZ $r_{0.475}$ $Ti_{0.525}$ $O_3$) ceramic thin films and 70Ag-30Pd electrodes were investigated. Because the actuators were designed to stack ceramic layer and electrode layer alternatively, the ceramic-electrode interfaces may act as a resistance to motion of domain wall. so the polarization and strain were affected by the amount of 180$^{\circ}$domain, electric field strength and mechanical compressive stress. Consequently, the change of polarization, displacement with respect to field strength, and mechanical compressive stress were likely to be caused by readiness of the domain wall movement around the ceramic-electrode interfaces.ces.