• Title/Summary/Keyword: Electric Service

Search Result 708, Processing Time 0.026 seconds

Design and Implementation of Plannar S-DMB Antenna with Omni-Directional Radiation Pattern Using Metamaterial Technique (메타 물질 기법을 이용한 전방향성 복사 패턴을 갖는 평면형 S-DMB 안테나 설계 및 구현)

  • An, Chan-Kyu;Yu, Ju-Bong;Jeon, Jun-Ho;Kim, Woo-Chan;Yang, Woon-Geun;Nah, Byung-Ku;Lee, Jae-Ho
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.12
    • /
    • pp.1343-1351
    • /
    • 2010
  • In this paper, a novel patch antenna based on the metamaterial CRLH(Composite Right- and Left-Handed) structure is designed, implemented, and measured. Contrary to the standard microstrip patch's fundamental resonance mode of half-wavelength or its positive multiple, the proposed antenna shows the in-phase electric field over the entire antenna. The proposed antenna has a desired omni-directional field pattern which is typical characteristic of $\lambda/4$ monopole antenna, and also shows the merit of low profile. HFSS(High Frequency Structure Simulator) of Ansoft which is based on the FEM(Finite Element Method) is used to simulate the proposed antenna. FR-4 substrate of thickness 1.6 mm and relative permitivity 4.4 is used for the proposed antenna implementation. The implemented antenna showed VSWR (Voltage Standarding Wave Ratio)$\leq$2 for the frequency band from 2.63 GHz to 2.655 GHz which is used for S-DMB (Satellite-Digital Multimedia Broadcasting) service. And measured peak gain and efficiency are 2.65 dBi and 81.14 %, respectively.

A Comparative Study Between Korea And Japan on Low-Carborn Vehicles Selection attributes and purchase Dates According to Consumer Characteristics (소비자 특성에 따른 저탄소자동차선택속성요인과 구매 시기에 관한 한·일 비교연구)

  • Yim, Ki-Heung
    • Journal of Digital Convergence
    • /
    • v.17 no.12
    • /
    • pp.159-170
    • /
    • 2019
  • This study is an online survey for consumers in the metropolitan areas of Japan and Korea, which are advanced countries in Asia, and the maturity of the automobile market. The purpose of this study is to compare the results of Korea and Japan. As a result of this study, we analyzed the differences between the consumer characteristics and the optional attribute factors of low-carbon automobiles of Korea. There was a difference. It was found that the factors of low carbon car selection attribute differed with age, and that stability was more important when selecting low carbon car as income level increased. In Japan, there were no differences in the selection attribute factors of low carbon cars by gender, age and income. In addition, there is no difference in the relationship between the future purchase timings of low-carbon car types in both Korea and Japan. Implications of this study Korea has a meaningful result that Korea tends to select low-carbon automobiles with an emphasis on economic aspects and ages, and that safety tends to emphasize safety of low-carbon automobiles according to income levels. In the case of low carbon car, there was a tendency to select a low carbon car without any difference in consumer characteristics. The relationship between the expected purchase time according to the type of low carbon car and the Korean car show that the preferred car within the next 10 years among the low carbon car types is electric car and Japan prefers hybrid car.

A CNRP Server/Client System (CNRP 서버/클라이언트 시스템)

  • Yu, Young-Ho;Lee, Jong-Hwan;Lee, Jung-Hwa;Kim, Kyong-Sok
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.8 no.5
    • /
    • pp.607-617
    • /
    • 2002
  • IETF has proposed CNRP that is a protocol exchanging CNRP objects between server and client for resolving a common name to URIs of the desired Internet resouces. CNRP enables users to access various services via the integrated interface, to easily get the desired resources, and to reuse the results not as the data but as the information. Whereby these advantages, CNRP will be generally used for the integration of the various Internet services or the applications where the resolution of common name is needed. But, CNRP specification doesn't describes the practical implementation method for server and client. Though a few prototype systems are developed in some researches using CNRP, they are not enough to be generally used for the various Internet applications because they doesn't include all objects specified in CNRP specification or they construct systems with one server. So, this Paper proposes the practical implementation method for CNRP server/client through analyzing and solving the problems occurred when implementing them, and implements all objects specified in CNRP specification. This paper also verifies the feasibility of the proposed method by developing the prototype system of the company name resolution service using the CNRP server/client implemented in this study. The CNRP server/client implemented in this paper are used to develop various CNRP application systems.

A Study on Linkage Integration Control System Using Power Line Communication(PLC) and Wireless Sensor Network(WSN) (전력선 통신과 무선 센서 네트워크 기술을 이용한 연동 통합제어 시스템에 관한 연구)

  • Ji, Yun-il;Lim, Kang-il;Park, Kyung-sub
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2009.05a
    • /
    • pp.733-736
    • /
    • 2009
  • Power Line Communication(PLC) is need not additional communication line. So establishment expense is inexpensive and application is simple. Therefore, lower part network of various application field is possible. However, there are high subordinate interference and noise problem on limited transmission data and communication interference element. Wireless Sensor Network(WSN) is need not infrastructure, Self-regulating network architecture of sensor nodes is possible. So at short time, network construction is available. But, power consumption is increased by active sensing for QoS elevation and unnecessary information transmission, low electric power design and necessity of improve protocol are refered to life shortening problem and is studied. In this paper, supplement problem of power line communication and wireless sensor network mutually and because advantage becomes linkage integration control system using synergy effect of two technologies as more restriction be and tries to approach structurally control network that is improved for smooth network environment construction. Honeywell's hybrid sensor network does comparative analysis(benchmarking). Confirm performance elevation proposing teaming of power line communication and wireless sensor network. Through simulation, service delay decreases and confirms that performance elevation.

  • PDF

Effects of Mixing Method and Storage Period of Dangyuja-Sugar Mixture on Customer Preferences for Dangyuja-tea (당유자청의 제조방법과 냉동 저장기간이 당유자차 기호도에 미치는 영향)

  • Kim, Yun-Jung;Moon, Jeong-Yong;Kim, Jung-Hyon;Kim, Haeng-Geun;Kim, Jae-Hoon;KimCho, So-Mi
    • Food Science and Preservation
    • /
    • v.14 no.2
    • /
    • pp.160-164
    • /
    • 2007
  • This study was performed to investigate the effects of mixing methods, storage period, and dilution ratio of Dangyuja-sugar mixture on the customer preferences for Dangyuja-tea. Most sensory characteristics such as bitterness, flavor, and taste are influenced more by mixing methods of Dangyuja-sugar mixtiue than by storage period. The Dangyuja-sugar mixture prepared by slice cutting is preferred to those prepared by operating electric mixer, The preference test showed that the appearance is not influenced by storage period but by mixing methods, whereas the tne and texture is more affected by storage period in which the 24 month storage is preferred to 12 month storage. therefore, the overall preference fer Dangyuja-tea is the on that prepared with 20% contents of Dangyuja-sugar mixture which is slice-cut and 24 month stored.

A study on the smoke control performance of the damper exhaust system at FCEV fire in tunnel for small vehicles (소형차 전용터널 내 수소연료전지차 화재시 집중배기방식의 제연성능에 관한 연구)

  • Hong, Seo-Hee;Baek, Doo-San
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.24 no.6
    • /
    • pp.745-756
    • /
    • 2022
  • The road tunnel is a semi-closed space that is blocked on all sides except the entrance and exit, and in the event of a fire, the smoke of the fire spreads longitudinally due to heat buoyancy caused by the fire and air currents that always exist in the tunnel. To solve this problem, smoke removal facilities are installed in road tunnels to secure a safe evacuation environment by controlling the direction of movement of smoke or directly smoking at fire points. In urban areas, the service level of urban roads decreases due to the increase in traffic due to the increase in population, and as a solution, the construction of underground roads in urban areas is increasing. When a fire occurs during hydrogen leakage through TPRD of a hydrogen fuel cell vehicle (FCEV), the fire intensity depends on the amount of leakage, and the maximum fire intensity depends on the orifice diameter of the TPRD. Considering the TPRD orifice diameter of 1.8 mm, this study analyzed the diffusion distance of fire smoke according to the wind speed of the roadway and the opening interval of the large exhaust port when the maximum fire intensity was 15 MW. As a result, it was analyzed that air flow in the tunnel could be controlled if the wind speed of the road in the tunnel was less than 1.25 m/s, and smoke could be controlled within 200 m from the fire if the damper interval was 50 m and 100 m.

Solar ESS Peak-cut Simulation Model for Customer (수용가 대응용 태양광 ESS 피크컷(Peak-cut) 시뮬레이션 모델)

  • Park, Seong-Hyeon;Lee, Gi-Hyun;Chung, Myoung-Sug;Chae, U-ri;Lee, Joo-Yeuon
    • Journal of Digital Convergence
    • /
    • v.17 no.7
    • /
    • pp.131-138
    • /
    • 2019
  • The world's electricity production ratio is 40% for coal, 20% for natural gas, 16% for hydroelectric power, 15% for nuclear power and 6% for petroleum. Fossil fuels also cause serious problems in terms of price and supply because of the high concentration of resources on the earth. Solar energy is attracting attention as a next-generation eco-friendly energy that will replace fossil fuels with these problems. In this study, we test the charge-operation plan and the discharge operation plan for peak-cut operation by applying the maximum power demand reduction simulation. To do this, we selected the electricity usage from November to February, which has the largest amount of power usage, and applied charge / discharge logic. Simulation results show that the contract power decreases as the peak demand power after the ESS Peak-cut service is reduced to 50% of the peak-target power. As a result, the contract power reduction can reduce the basic power value of the customer and not only the economic superiority can be expected, but also contribute to the improvement of the electric quality and stabilization of the power supply system.

Reasonable Adjustment plan of Administrative boundary for Cadastral Re-examination district - Based on the result of Cadastral resurvey in Songgi-ri - (지적재조사사업지구 내 행정구역경계 합리적 조정방안 - 지적재조사사업 송기지구 중심으로 -)

  • Kim, Honng-Ryeol;Heo, Tae-Heon;Lee, Keon-soo
    • Journal of Cadastre & Land InformatiX
    • /
    • v.48 no.2
    • /
    • pp.31-49
    • /
    • 2018
  • The boundaries of administrative districts are the basic system for the whole country and are closely related to the daily life of the residents. The administrative boundary of Korea is registered and managed in the cadastral study based on the intellectual study of cadastral system. There is a non-conforming land where the registration details of some cadastral studies do not match the actual situation of the land, and the cadastral rehabilitation project is implemented as a national project to create a new digital cadastral study. However, due to the cadastral rehabilitation project, there is an unreasonable parcel that the past administrative boundaries and newly registered boundaries are different from each other due to the registration of the past administrative boundaries for the newly registered cadastral studies. The purpose of this study is to identify the unreasonable administrative boundaries arising from the cadastral rehabilitation project and to identify problems in order to effectively manage the number of branches in terms of administrative and administrative efficiency in terms of registration and inhabitants management. It is expected that the legal system will be improved to legitimately control the boundary of the administrative district and to manage the boundaries of the administrative district accordingly and to provide the service and to solve the inconvenience of the nation.

Discovering the Knowledge Structure of Graphene Technology by Text Mining National R&D Projects and Newspapers (국가R&D과제와 신문에서 텍스트마이닝을 통한 그래핀 기술의 지식구조 탐색)

  • Lee, Ji-Yeon;Na, Hye-In;Lee, Byeong-Hee;Kim, Tae-Hyun
    • The Journal of the Korea Contents Association
    • /
    • v.21 no.2
    • /
    • pp.85-99
    • /
    • 2021
  • Graphene, called the "dream material" is drawing attention as a groundbreaking new material that will lead the era of the 4th Industrial Revolution. Graphene has high strength, excellent electrical and thermal conductivity, excellent optical permeability, and excellent gas barrier properties. In this paper, as the South Korean government recently announced Green New Deal and Digital New Deal policy, we analyze graphene technology, which is also attracting attention for its application to Corona 19 biosensor, to understand its national R&D trend and knowledge structure, and to explore the possibility of its application. Firstly, 4,054 cases of national R&D project information for the last 10 years are collected from the National Science & Technology Information Service(NTIS) to analyze the trend of graphene-related R&D. Besides, projects classified as green technology are analyzed concerning the government's Green New Deal policy. Secondly, text mining analysis is conducted by collecting 500 recent graphene-related articles from e-newspapers. According to the analysis, the field with the largest number of projects was found to be high-efficiency secondary battery technology, and the proportion of total research funds was also the highest. It is expected that South Korea will lead the development of graphene technology in the future to become a world leader in diverse industries including electric vehicles, cellular phone batteries, next-generation semiconductors, 5G, and biosensors.

A Study on the remote acuisition of HejHome Air Cloud artifacts (스마트 홈 헤이 홈 Air의 클라우드 아티팩트 원격 수집 방안 연구)

  • Kim, Ju-eun;Seo, Seung-hee;Cha, Hae-seong;Kim, Yeok;Lee, Chang-hoon
    • Journal of Internet Computing and Services
    • /
    • v.23 no.5
    • /
    • pp.69-78
    • /
    • 2022
  • As the use of Internet of Things (IoT) devices has expanded, digital forensics coverage of the National Police Agency has expanded to smart home areas. Accordingly, most of the existing studies conducted to acquire smart home platform data were mainly conducted to analyze local data of mobile devices and analyze network perspectives. However, meaningful data for evidence analysis is mainly stored on cloud storage on smart home platforms. Therefore, in this paper, we study how to acquire stored in the cloud in a Hey Home Air environment by extracting accessToken of user accounts through a cookie database of browsers such as Microsoft Edge, Google Chrome, Mozilia Firefox, and Opera, which are recorded on a PC when users use the Hey Home app-based "Hey Home Square" service. In this paper, the it was configured with smart temperature and humidity sensors, smart door sensors, and smart motion sensors, and artifacts such as temperature and humidity data by date and place, device list used, and motion detection records were collected. Information such as temperature and humidity at the time of the incident can be seen from the results of the artifact analysis and can be used in the forensic investigation process. In addition, the cloud data acquisition method using OpenAPI proposed in this paper excludes the possibility of modulation during the data collection process and uses the API method, so it follows the principle of integrity and reproducibility, which are the principles of digital forensics.